fiber mesh-SINA-SINO-CFM/I
1Pages

Sina-sino carbon fiber mesh Basalt fiber mesh control the crack and improve the load capacity of the original structures Reinforced fiber mesh with high temperature resistance Basalt fiber mesh (geogrid) is woven by basalt fiber with strong alkali and acid resistance as raw materials, Sina-sino carbon fiber mesh is woven with Toray carbon fiber yarn. Together with Sina-sino high-strength and then processed with asphalt (adhesive) and dried into shape. Comparing with the elastic modulus of sprayed mortar, it can be used for: bending strengthening, shear. asphalt concrete, basalt fiber asphalt concrete at room temperature has stronger anti-deformation ability, and its breaking elongation is about 3.1%. Basalt fiber has the advantages covering high temperature resistance, freeze-thaw resistance (- PRODUCT HIGHLIGHT 260～650℃), consistent thermal expansion coefficient with asphalt concrete, high tensile strength, UV resistance, strong chemical stability, anti-aging, etc. Since the mixing temperature of asphalt mixtures is as Simple, fast and convenient construction: the base layer does not need to be leveled and repaired before high as 190℃, the high-temperature resistant basalt fiber is a new material that replaces the competitive construction, the mortar sprayer can be used for large-area construction, and the construction speed is advantages of polyester fiber and lignin fiber. fast. Good anti-cracking effect: suitable for structural crack control and strengthening. Strong durability: carbon fiber is an inert material, so it will not be corroded, and it can also protect the PRODUCT HIGHLIGHT original steel bar in alkaline. The carbonization of concrete and the chloride in concrete will not affect the material properties of carbon fiber mesh. Good fire resistance: 1cm mortar protective layer can meet the requirements of fire protection standard ISO 1. 1. Ultra-high temperature and ultra-low temperature performance to prevent cracks in asphalt pavement; 2. High tensile strength; 3. No long-term creep, high thermal stability; 4. Good compatibility with asphalt mixture; 834 F60. Suitable for wet surfaces and environments: the base layer needs to be wetted before construction, and there is no requirement for the moisture content of the base layer, and it is suitable for wet interfaces. Thin strengthening thickness: under normal circumstances, the thickness of the mortar only needs to be 1.5-2cm, so the thickness of the sprayed concrete protective layer (such as tunnels, can reduce the 5. Stable physical and chemical performances, which can resist biological erosion and climate change. APPLICATION Not only meets the high temperature (up to 190 ) resistance requirements of asphalt mixing construction, APPLICATION Crack controlling and structural strengthening of concrete. but also for enhancing the anti-seepage and anti-cracking of cement concrete. The product can be widely used in railways, highways, sports halls, dams, water conservancy, tunnels, coastal beaches, reclamation, environmental protection engineering, etc. Sino-sina Building Materials Co.,Ltd. | www.wcrete.com | info@wcrete.com | +8