Crack sealing Adhesive-JGN806-Epoxy anchoring adhesive-JGN 805
2Pages

JGN806 Crack sealing Adhesive TECHNICAL DATA sealing the concrete crack DESCRIPTION JGN806 epoxy resin repair adhesive (structural strengthening and leveling adhesive) is twocomponent modified epoxy resin adhesive. PRODUCT HIGHLIGHT 1. High workability, and easy to paint and scrape; 2. High initial viscosity, and no flow; 3. High strength and high bonding strength of concrete; 4. Good anti-aging and medium corrosion resistance; 5. Close to the color of concrete; 6. Curing at ambient temperature with fast curing speed, and can be adjusted according requirements; 7. No volatile solvents, and hardly shrinks when hardened; 8. It can be bonded on the wet surface, and the bonding force is stronger in the dry environment; 9. The ratio of A and B is loose, and it is easy to use and non-toxic. Weigh the adhesive A and B components in a clean and dry container according to the recommended 1. Repair of high-strength concrete surface defects and pits; mixing ratio, and stir until the color is uniform. When the amount of adhesive is low, a putty knife can be 2. Leveling construction of concrete adhesive surface in carbon fiber reinforcement or sticking steel used for manually mixing on wooden boards, glass and other plates; when the amount of glue is high, it is recommended to use a mixing machine to mix, and ensure that the edges and bottom of the container reinforcement; anti-corrosion; are completely mixed evenly. 3. Construction of bridges and other concrete surfaces (anti-carbonization, waterproof, anti-corrosion); 4. Concrete surface decoration protection; concrete surface crack closure. Epoxy repair adhesive can be applied in wet epoxy, but its Adhesion performance is better in a dry environment. The water film on the concrete surface should be removed before construction, and the bonding surface should be as dry as possible. When epoxy resin repair adhesive is used for concrete surface protection (anti-carbonization, anti-corrosion, etc.), the concrete surface should be polished to remove scum, sand, and looseness This product is packed in plastic drum; A: 15Kg/drum, before construction until the bonding surface is exposed with coarse aggregate; at the same time, ensure that the concrete surface is clean, and there should be no dirt, impurities such as oil, dust, etc. Shelf life: 12 months. Use a putty knife to evenly reciprocate and scrape to a thickness of 2-5mm. 4. When the epoxy resin repair adhesive is used for defect repair or strengthening leveling, the loose concrete should be removed first, and then the surface treatment should be applied to the required thickness according to the above method. Add a small amount of prepared carbon fiber paste primer glue to the prepared epoxy resin repair glue paste to achieve a certain dilution effect. Sino-sina Building Materials Co.,Ltd. | www.wcrete.com | info@wcrete.com | +86 15373872353 STRUCTURAL STREN

TECHNICAL DATA 5.When epoxy resin repair adhesive is used for sealing the cracks on the concrete surface, it is Category I Grade A Adhesive of GB50278-2011 Technical Code for Safety Appraisal of Engineering recommended to expand the joints along the cracks with a cutting machine and then perform the sealing Structural Strengthening Materials treatment. 6.The epoxy resin repair glue can also be used for sealing the peripheral gaps and pasting the glue nozzle when pouring and pasting steel plates or cracking glue repairing. 7.The curing speed of epoxy resin repair adhesive is faster, and the...