Blue Banger Hanger  Concrete CODE LISTED Cast-In-Place Internally-Threaded Rod Hangers

Blue Banger Hanger Simplify Overhead Installations Multi-thread, cast-in-place wood-form and metal-deck inserts for cracked and uncracked concrete maximize jobsite efficiency and reduce inventory commitment. Also available in metal-roof-deck insert version, offering a low-profile design that does not interfere with roofing material. Speed •• Before the concrete pour, Blue Banger Hangers® mount on forms or decking quickly and easily, speeding up installation. •• The 3" blue sleeve on the Metal-Deck insert makes it easy to locate the insert after the pour, even after fireproofing has been applied...

Blue Banger Hanger Wood-Form Insert •• Code-listed under the 2012 IBC/IRC in accordance with AC446 for cracked and uncracked concrete applications, per ICC-ES ESR-3707 CODE LISTED •• Blue plastic ring acts as an insert locator when forms are removed •• Plastic ring creates a countersunk recess to keep internal threads clean from concrete residue •• Nails snap off with the swipe of a hammer after the forms are removed •• Multi-thread design allows insert to accept multiple rod diameters © 2015 SIMPSON STRONG-TIE COMPANY INC. F-A-BBH15 Strike the top of the hanger and drive the 3 mounting nails...

Blue Banger Hanger Metal-Deck Insert •• Code-listed under the 2012 IBC/IRC in accordance with AC446 for cracked and uncracked concrete applications, per ICC-ES-ESR-3707 CODE LISTED •• 3" plastic sleeve keeps internal threads clean and provides guidance to align threaded rod with the internal threads •• Extended sleeve length allows easy location of insert even with fireproofing on the underside of the deck •• Installed height of 2" allows insert to be used on top of or between deck flutes •• Compression spring keeps insert perpendicular to deck, even if bumped or stepped on after installation...

Blue Banger Hanger Metal-Roof-Deck Insert Features •• Low-profile design does not interfere with roofing material. •• Positive attachment to the roof deck prevents spinning and keeps the hanger in position. •• Pre-staked, self-drilling screws allow quick installation. •• Multi-thread design: The insert accepts 3 different rod diameters. Drill a hole in the metal deck using the appropriate diameter bit as referenced in the table. Insert the hanger into the hole and fasten to the deck with the two prestaked screws provided. Insert the rod into the sleeve and thread it into the hanger. Product Data...

Blue Banger Hanger Technical Information – Strength Design Blue Banger Hanger® Cast-In-Place, Internally-Threaded Wood-Form Insert for Cracked and Uncracked Concrete: Tension and Shear Strength Design Data1,2,3,4,5,6,8 Design Information Catalog Number Insert outside diameter Effective embedment depth Insert steel characterization Modification factor for insert tension strength for inserts located in a region of a concrete member where analysis indicates no cracking at service load levels Nominal tension strength of single insert in tension as governed by steel strength Nominal seismic tension...

Blue Banger Hanger Technical Information – Allowable Stress Design Wood-Form Insert: Tension Loads in Normal-Weight or Sand-Lightweight Concrete Model No. Tension Load Based on Concrete Strength (Normal Weight) Tension Load Based on Concrete Strength (Sand-Lightweight) Tension Load Based on Rod Strength (SandLightweight) Tension Load Based on Rod Strength (Normal Weight) F1554 Grade 36 Ultimate lbs. (kN) Allowable lbs. (kN) Allowable lbs. (kN) Ultimate lbs. (kN) Allowable lbs. (kN) Allowable lbs. (kN) 940 (4.2) 2,105 (9.4) 3,750 (16.7) 2,105 (9.4) 3,750 (16.7) 5,875 (26.1) 5,875 (26.1) 8,460...

Blue Banger Hanger Technical Information – Allowable Stress Design Figure 2. Typical metal deck installation Metal-Deck Insert: Shear Loads in Normal-Weight or Sand-Lightweight Concrete over Metal Deck Model No. Shear Load Based on Concrete Shear Load Based on Concrete Shear Load Based Min. Threaded Embed. Edge Min. Strength (Install in High Flute) Strength (Install in Low Flute) on Rod Strength Rod Depth Dist. Spacing f'c ≥ 3,000 psi (20.7 Mpa) f'c ≥ 3,000 psi (20.7 Mpa) F1554 Grade 36 Dia. in. in. in. in. (mm) (mm) (mm) Ultimate lbs. (kN) Allowable lbs. (kN) Ultimate lbs. (kN) Allowable lbs....