Rubbol WP 151
2Pages

sikkEns WOOD COATINGS Rubbol WP 151 Product description Waterborne, white two-component primer for spray application for wooden components, exterior and interior. Especially suitable for front doors, MDF/HDF and windows made out of discolorating wood species like e.g. pine, larch and hardwood. The product consists of component A = primer and component B = hardener. - good pore wetting - high filling properties - good sanding properties - isolating property Colour creme-white Gloss level Matt Binder type Component A: Acrylic-polyurethane combination Component B: isocyanate Pigments Titanium dioxid Packaging Component A: 4.16 l in 5 l can / 16.67 l in 20 l can Component B: 0.84 l in 1 l can / 3.33 l in 5 l can Component A + Component B = 5 l / 20 l Processing Spraying Drying times The drying process of the coating depends on the applied wet film thickness and can extend when using timber with a high extract contents or drying in damp/cold conditions. During the drying process one should ensure for adequate temperature and ventilation. If the drying conditions are not upheld, damages within the coating cannot be warranted. Drying at 23 °C / 50 % R.H. Dust-dry: after approx. 2 hours Sandable: after approx. 6 hours Recoatable: after approx. 4 - 8 hours waterborne After a minimum drying time of 4 hours up to a maximum of 16 hours, the midcoat can be applied without intermediate sanding. If the following coat is applied at a later time, e.g. after drying overnight, intermediate sanding must be carried out to ensure proper adhesion. For good isolation and water resistance, a drying temperature of 25 - 30 °C is recommend; the temperature should not be less than 20 °C. In case of forced drying at 40 °C and after cooling down, the next coat can be applied after approx. 1 hour. Cleaning of equipment Clean directly after use with water, if needed with washing up liquid or with ST 830. StorageThe minimum storage stability of sealed containers is 2 years. Storage temperature: +5 - +30 °C. After ending of the storage time the product still can be usable, but some attributes may vary from new product. Therefore such over-stored product has to be applied with special attention. Opened cans must be sealed correctly! Store in a cool but frost-protected area. PUR hardeners are sensitive to moisture. Please, store the hardener always in tightly closed containers. Disposal Only residue emptied cans can be disposed via recycling. Liquid wastes must be disposed of according to national regulations or according to EU-disposal key 08 01 12. Hazard identification In accordance with EC guide lines - Material safety data sheet, point 15. Warning Before use, read the identification and product information. Even when working with low emission products one should take care of the customary protection measures. General instructionsThe wood moisture content for the application of Sikkens coating systems should be between 12 % and 15 %. According to the guidelines for window coating systems, published by the Federal German Committee for Paint and Material Value Protection (Instruction Leaflet No. 18), of VOB, Part C, DIN 18363, and the recommendations of the German Institute for Window Technology e.V. in Rosenheim, all wooden constructions in buildings must be coated on all sides with at least one primer and one intermediate coat (minimum dry film thickness 30 |jm) before they are incorporated in buildings. The choice and use of the coating system, especially the colour shade, should also be taken into account. Darker shades can increase the surface temperature (up to 80 C). For use in a technical industrial companies and exclusively released for Sikkens systems recomondations. To ensure a correct adhesion of the following coating system, the paint system should not be sanded down to the substate. With some wood species, especially hardwoods, discolouration can appear due to natural wood extractives. Akzo Nobel Industrial Coatings Ltd Unit 4a, Mercer Way, Shadsworth Bus Pk Akzo Nobel Industrial Coatings Ltd Unit 4a, Mercer Way, Shadsworth Bus Pk Akzo Nobel Wood Coatings GmbH Dusseldorfer StraGe 96-100 UNITED KINGDOM Rep of IRELAND GERMANY Blackburn, Lancs, BB12QZ Blackburn, Lancs, BB12QZ D-40721 Hilden 1/2 generated: 20.06.2017 last change: 12.08.2015

VOC guideline EC limit value for this product cat. (A/d): 150g/l (2007) / 130g/l (2010). The mixture ready-to-use contains 63 g/l VOC. VOC component A: 31 g/\. Relevant information The here mentioned coating system is only an example, other systems are possible. All external materials (i.e. fillers, tapes, sealing compounds, cleaners) must be checked for compatibility with the coating system before use. Please observe the relevant Technical Data Sheets or seek advice from the Sikkens sales representative or contact the technical centre. Whenever polyurethane (PUR) material is to be over...