PRODUCT DATA SHEET SikaCor® EG-5 2-pack AY-PUR top coat PRODUCT DESCRIPTION CHARACTERISTICS / ADVANTAGES SikaCor® EG-5 is a 2-pack acrylic polyurethane top coat. By adding 1 % b.w. SikaCor® PUR Accelerator (see product data sheet for more information) a fast touch and through drying will be achieved. Very good corrosion protection properties Tough elastic and hard but not brittle Largely insensitive against shock and impact Excellent chemical, weather and colour stability APPROVALS / STANDARDS USES SikaCor® EG-5 may only be used by experienced professionals. In combination with 2-pack primer and intermediate coats of the SikaCor® and Sika® Permacor® product range for heavy duty corrosion protection of atmospheric exposed and submerged steel structures. SikaCor® EG-5 can also be used as a line marking paint on selflevelling and broadcasted epoxy and polyurethan resin based floors e. g. for car parks. ▪ Approved according to German standard ‘TL/TPKOR-Stahlbauten, Blatt 87 and Blatt 94’. ▪ In combination with SikaCor® PUR Accelerator, SikaCor® EG-5 is approved according to German standard ‘TL/TP-KOR-Stahlbauten, Blatt 97’. ▪ Approved according to Austrian standard RVS 15.05.11 and RVS 08.09.02 Systems S1, S5, S6, S8, S11, S13 and S16. PRODUCT INFORMATION Packaging SikaCor® EG-5 Sika® Thinner EG SikaCor® Cleaner Appearance / Colour Shelf Life Storage Conditions In originally sealed containers in a cool and dry environment. Solid Content Product Data Sheet SikaCor® EG-5 September 2020, Version 08.01 020602000040000004

TECHNICAL INFORMATION Chemical Resistance Weather, water, sewage, seawater, smoke, de-icing salts, acid and lye vapours, oils, grease and short term exposure to fuels and solvents. Thermal Resistance Dry heat up to + 150°C, short term up to + 200°C Damp heat up to approx. + 50°C In case of higher temperatures please consult Sika. An exposure to high temperatures can lead to color changes. SYSTEM INFORMATION Systems Steel: Used as top coat on 2-pack primer and intermediate coats of the SikaCor® and Sika® Permacor® product range. Hot dip galvanized steel, stainless steel and aluminium: 1 x SikaCor®...

Drying stage 6 + 5°C after + 10°C after + 20°C after + 40°C after + 80°C after By adding 1 % b.w. SikaCor® PUR Accelerator: Dry film thickness 80 μm 0°C after 52 h + 5°C after 18 h + 10°C after 13 h + 20°C after 5h Waiting Time / Overcoating Min. until drying stage 6 is achieved Max. unlimited Prior to further applications possible contamination must be removed. Drying time Final drying time Depending on film thickness and temperature full hardness is achieved after 1 - 2 weeks. Tests of the completed coating system should only be carried out after final curing. APPLICATION INSTRUCTIONS SURFACE...

ECOLOGY, HEALTH AND SAFETY For information and advice on the safe handling, storage and disposal of chemical products, users shall refer to the most recent Safety Data Sheet (SDS) containing physical, ecological, toxicological and other safety-related data. DIRECTIVE 2004/42/CE - LIMITATION OF EMISSIONS OF VOC According to the EU Directive 2004/42/CE, the maximum allowed content of VOC (product category IIA / j, type SB) is 500 g/l (Limits 2010) for the ready to use product. The maximum content of SikaCor® EG-5 is < 500 g/l VOC for the ready to use product. LEGAL NOTES The information, and, in...