PXM30-1
10Pages

Catalog excerpts

High-quality touch panels for communication using an HTML5.0 web server • Compact design featuring a low installation depth for mounting in panel doors • Wall-mounting with installation frames for PXM40-1, PXM50-1 (ordered separately) • High-resolution, capacitive touch displays (landscape) • Operating voltage AC 24 V, DC 24 V, or Power over Ethernet (PoE) (PXM40-1 and PXM50-1) Smart Infrastructure

Open the catalog to page 1

The devices are suitable for installation in panel doors. Mounting frames are available for wall mounting (ordered separately). • PXM40.E and PXM50.E (flush mounting) • PXM30.E (surface mounting) Settings Different settings are available, however, for user-friendly operation of the touch panel. They can be edited after login. For details, see "Desigo Touch Panel client commissioning", A6V11604303. The mounting set / wall-mount frames must be ordered separately. Siemens Smart Infrastructure

Open the catalog to page 2

Product documentation Engineering For additional information on cable lengths, topology, etc.: See Desigo Control Point client commissioning (A6V11604303). Mounting Mounting types Touch Panels are designed for • Mounting in the panel door • Installation in cavity walls using separately ordered installation frames (PXA.V40. PXA.V50) • Wall or panel door mounting using separately ordered mounting set (PXA.S30) Mounting Instructions Mounting installations are printed on the unit's packaging material. Cut outs for panel installation and wall mounting See "Dimensions". Installation Power is...

Open the catalog to page 3

LED display (front side) Maintenance Cleaning Touch panels are maintenance free. Dirt on the display can be cleaned using off-the-shelf display cleaners for smart phones, a moist rag, and/or off-the-shelf microfiber cloth for monitors or glasses. Recommended products: • Lysol towel • Clorex towel • Water with 2% alcohol • Damp microfiber cloth • H2O2 hydrogen peroxide • Sterillium® Classic Pure Firmware upgrade You can update the firmware with ABT Site. Repair The devices cannot be repaired. The entire unit must be replaced. Siemens Smart Infrastructure The device is considered an...

Open the catalog to page 4

Technical data Power supply Plug Data rate (USB 2.0 full speed) Protective switch against surges and over current Galvanic isolation of system neutral 1 Type B (device) 12 Mbps Yes No Ethernet interface Plug Interface type Bit rate Protocol Galvanic isolation of system neutral 1 RJ45, screened 100BASE-TX, IEEE 802.3 compatible 10/100 Mbps, autosensing BACnet over UDP/IP Yes Screw terminals, plug-in _ 5 Siemens Smart Infrastructure

Open the catalog to page 5

Conformity Ambient conditions and protection classification Siemens Smart Infrastructure

Open the catalog to page 6

Connection terminals, service button Reset / series B and higher: Service button Dimensions All dimensions provided in mm and inches. PXM30-1 Mounting kit PXA.S30: see data sheet A6V11646070 Siemens Smart Infrastructure

Open the catalog to page 7