Catalog excerpts
Desigo™ Room Automation Compact actuating room automation stations, BACnet/IP, AC 24 V (Actuating DXR) DXR1.E09PDZ-112, DXR1.E09PDZ-113 Combination of room automation station and actuator for buildings with increasing demand on functionality and flexibility in Room Automation, VAV and FPB applications. ● ● ● ● ● ● ● ● ● Compact, configurable room automation station in combination with actuator for HVAC QMX1.M34H room unit and QMA1.N30H room sensor BACnet IP communications (BTL certified) 2-port Ethernet switch USB interface Operating voltage AC 24 V Built-in 5 Nm actuator Internal 0…500 Pa differential pressure sensor Plug-in terminal blocks
Open the catalog to page 1Features Configurable The DXR1.. automation stations provide the infrastructure for systems and applicationspecific functions which can be configured. Compact series The compact build allows direct mounting on the damper shaft. It is designed for VAV and FPB. Plug-in terminal blocks Plug-in terminal blocks for easy exchange of room automation stations. Integrated actuator The actuator gear base is integrated into the housing of the actuating DXR. It supports dampers with up to 5 Nm torque. Use Desigo Room Automation offers the highest level of flexibility for energy-optimized solutions...
Open the catalog to page 2LED Color Activity Function Run Device is ready for operation Regular flashing Start-up or the program is stopped Rapid flashing Program error Hardware fault Wrong or corrupt software No application loaded Service button (SVC) Physical identification on the network.Technical / Mechanical design Housing The housing consists essentially of flame retardant, non-brominated plastic. Siemens Smart Infrastructure
Open the catalog to page 3Ordering When ordering, indicate product number, stock number and description. Equipment combinations Siemens Smart Infrastructure
Open the catalog to page 4Identification Each device has a unique serial number to ensure efficient commissioning. It is provided on the adhesive barcode reader. The serial number can be read directly into the engineering tool using a barcode reader. Wiring Wiring must be sufficiently insulated to the available rated voltage. Sizing and fusing of the wiring depends on the connected load. Mounting The automation station is mounted directly on a damper shaft. See the mounting instructions (document ID: A6V11393918) for detailed information. Differential pressure sensor • Avoid bends and pressure when attaching the...
Open the catalog to page 5Maintenance The controller is maintenance-free. Disposal The device is considered an electronic device for disposal in accordance with the European Guidelines and may not be disposed of as domestic garbage. ● Dispose of the device through channels provided for this purpose. ● Comply with all local and currently applicable laws and regulations. Warranty Technical data on specific applications are valid only together with Siemens products listed under "Equipment combinations". Siemens rejects any and all warranties in the event that third-party products are used. 6 Siemens Smart Infrastructure
Open the catalog to page 6Technical data Power data Power supply Transformer requirements and recommended voltages Functional data Functional data Universal inputs Siemens Smart Infrastructure Analog inputs: sensor Digital inputs Analog output
Open the catalog to page 7Siemens Smart Infrastructure
Open the catalog to page 8Ambient conditions and protection classification Siemens Smart Infrastructure
Open the catalog to page 9FCC regulations Modification of this device to receive cellular radio telephone service signals is prohibited under FCC rules and federal law. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications....
Open the catalog to page 10Connection terminals Siemens Smart Infrastructure
Open the catalog to page 11Issued by Siemens Switzerland Ltd Smart Infrastructure Global Headquarters Theilerstrasse 1a CH-6300 Zug Tel. +41 58 724 2424 www.siemens.com/buildingtechnologies 12 Siemens Smart Infrastructure Document ID A6V11393931_en--_c Edition © Siemens Switzerland Ltd, 2019 Technical specifications and availability subject to change without notice.
Open the catalog to page 12All SIEMENS Building Technology catalogs and technical brochures
-
RDS110
22 Pages
-
PXC5.E003
12 Pages
-
PXC4.M16
16 Pages
-
Fine Dust Duct Sensors
18 Pages
-
Automatic fire detectors
10 Pages
-
QAF63.2-J
8 Pages
-
PXM30-1
10 Pages
-
PXC4.E16
14 Pages
-
A6V10575277
16 Pages
-
Switching actuator
3 Pages
-
Gamma instabus
14 Pages
-
KNX/DALI Gateway Twin N 141/31
14 Pages
-
RRV934
12 Pages
-
WRI982
12 Pages
-
5WG1 115-3AB_1
4 Pages
-
GAMMA Product catalog 2020
411 Pages
-
Gamma - Building control 2015
399 Pages
-
Catalog LV 51
150 Pages
-
DMS8000 product catalog
22 Pages
-
Installation guide KNX sensors
39 Pages
-
Symaro-flushmount
8 Pages
-
Product Catalog 2013
649 Pages
Archived catalogs
-
System Catalog 2014
191 Pages
-
SYMARO™ Sensors
16 Pages
-
Fixed dome cameras
10 Pages
-
BM3 - Door entry phone for PABX
224 Pages
-
AR6332-BI - Fingertip reader
5 Pages