The AR6332-BI fingerprint reader in a Mullion housing is part of the new Siemens access reader range.The reader, which is intended for Access Controlapplications, can be used either in identification mode (the user is identified by fingerprint data only) or in verification mode (a PIN-code is entered as reference for the stored template to be compared with the actualfingerprint).The reader AR6332-BI can be connected to the CC30xx for CerPass systems, the Dual Reader Interface forSiPass or to the DC2000 for SIPORT NT Accesssystems. Industrie Forum Design, HannoverIF Design Award Winner 2001 > A24205-A335-B102Siemens Building TechnologiesIssue: 05/2003Fire & Security Products size="-1">

Features ? ? Reads the fingerprint information and compares it with a fingerprint template of the user that has been previously stored in the reader with the Bio FTM application. An ID Number of the identified person will then be transmitted to the CerPass or SIPORT NT Access control system for further processing. The fingerprint templates are stored in a coded form in the reader memory. ? Identification or verification of the fingerprint templates: DIP-switch for functionality selection (Identification or Verification with PIN). ? Identification mode is recommended to be used in cases where...

Installation Installation improved for wall mounting (installation accessories are included with the reader). Recommended assembly height (for ergonomic reasons) 150cm.Connection to door control unit CC30xx, DC2000 or Dual Reader Interface via RS485 2-wire party line.Connection to the Bio FTM application via RS232 special connection or via LAN with the ANC1616-B device. Dimensions (mm) AR6332-BI > 3/5A24205-A335-B102Siemens Building Technologies Issue: 05/2003Fire & Security Products size="-1">

Specifications / advantages Siemens Reader AR6332-BIOther Biometric readers to be found on the market +Fingerprint Identification or verification with PIN Only verification +Identification- and verification with PIN modes to be set on the same hardware Not adjustable +Fingerprint templates to be downloaded directly or via LAN Download either via LAN or via RS485 Bus Not adjustable +Possible data encryption on the LAN interface by using the ANC1616-B device No encryption +Possible mixed mode with normal card readers on a same door controller. Separate network for the biometric readers +Integrated...