SignKit Brochure
36Pages

Contents Signkit is a complete system of precision engineered components for the display of signs and media. Designed with the versatility to provide simple but effective signs. This fully integrated sign system creates unique architectural signage with an edge, designed to interface with a wide range of materials including toughened glass, acrylic, composites or timber.

Rod 6mm + 12mm The Rod system allows the ability to construct reception directory signs over 4m high. Rod can be fixed wall to wall or floor to ceiling and the range of components allow for vertical and horizontal configurations as well as grid arrangements using crossover connectors. This is a highly adaptable, flexible and immensely strong system for the display of graphic panels manufactured from any substrate. The system is available in silver satin anodised aluminium, black satin anodised aluminium, stainless steel or brass finishes.

Rod A. 40mm Ø, wall mount to hold 12mm rod Rod C. 30mm Ø panel fixing for 6mm vertical rod Rod D. 30mm Ø wall mounted panel fixing for 6mm vertical rod. Used as additional wall support every 750mm Rod E. 30mm Ø wall mounted cross over fixing for 6mm Ø vertical and 12mm Ø horizontal rod Rod B. 30mm Ø cross over fixing for 6mm Ø vertical & 12mm Ø horizontal rod

This contemporary sign support system empathises with both traditional and modern architecture alike.

Here are just a few of the many different components within the Signkit range to fix signage panels to both 6mm and 12mm 0 systems. 2 piece panel grip, Panel support, holds drilled panels 2 piece picture hook,

Cable 1.5mm + 3mm The Signkit cable components range is available for use with both 1.5mm & 3mm cable as standard and includes cable fixings to suit different weights of signage as well as all site requirements – including wall to wall, ceiling or wall to floor, or just ceiling mounted and the cables can be specified with low voltage lighting for illuminated displays. Tensioned cable components are perfectly suited for supporting wayfinding signs throughout a building as they provide the flexibility of changing the number of listings or layout order at just the turn of a grub screw.

15.3 Fixing plate 15.4 End stop 15.14 Double sided panel grip, holds panels up to 10mm thick 15.13 Single sided panel grip, holds panels up to 10mm thick 15.23 Panel support, holds drilled panels up to 10mm thick All components are available in satin anodised aluminium, black anodised aluminium, stainless steel or brass finishes and as individual components or as complete cable kits. Here are just a few of the many different components within the Signkit range to fix signage panels to cable. 15.3 Fixing plate

Bespoke Signage With full in-house production facilities, we have the capability to respond to diverse requirements and deadlines whilst maintaining complete control of costs and quality. At Signkit we pride ourselves on being able to offer a bespoke service that is genuinely second to none and we relish the opportunity to tackle any project, large or small, corporate or leisure.

Bespoke Signage From initial contact to project completion, our design service and technical expertise is an invaluable resource for our customers. We offer the same care for a one-off sign or a complete wayfinding or statutory sign programme, that includes full drawings, supply and installation. Visitors to our showroom are encouraged to discuss their requirements with one of our design team who are on hand to give technical advice on the suitability of particular materials.

Signkit can also create a wide variety of outside pylons for signage which can be configured to suit your requirements. Here are some examples incorporating different shaped profiles and finishes, as well as single and double sided versions and with different fixing options.

Signblock + Xblock Signblock is sleek and minimal in design and its flexibility of application allows it to be specified to provide a secure fixing method for all types of signs and notices. Signblock’s clean purity of line creates simple uninterrupted shapes for a contemporary look and a functional form that pleases the eye. These sleek contours are achieved by being cleverly supported by concealed brass olives, locating on a grub screw. Signblock can also be specified with LED illumination to edge-light acrylic or glass panels, making it suitable to be specified for Fire Escape signage.

Signblock ceiling mounted Signblock wall mounted Signblock is available in wall, projecting and ceiling mounted versions, is supported by concealed brass olives and can be used to support signs from top, bottom and side edges.

Signblock Signblock is machined from 25mm square sections of aluminium, stainless steel or brass and is available in any length up to 1500mm and slot sizes can be specified to accommodate panel thickness of 2-10mm. And it can be supplied in wall mounted, projecting, suspended, freestanding or as desk top signage versions.

As part of the Sign block range, Xb lock is another sleek, stylish and cost effective way to wall mount signs and acrylic image/poster holders. It is machined with a standard slot to accommodate panels of up to 8mm thick and is available in silver satin anodised finish in lengths of up to 1500mm. Fire Action Operate the nearest alarm call point, dose doors Leave the building via the nearest available exit Reporttothe person in charge of the assembly point Payment cflx* the front steps .enterthe building until

Signslot The slender, refined lines of Signslot enhance any ceiling suspended or wall mounted signs from Micro Signslot in 12mm diameter takes panels up to 2mm thick and may be top or side fixed department identification to a retail or tenant directory. Signslot can accept panels from 2-10mm, which are secured in position with concealed grub screws and is precision engineered in 3 diameters, Micro - 12mm Ø, Mini - 19mm Ø and Maxi - 30mm Ø. Signslot is available in any length up to 1500mm, with either a single or double slot, in silver satin anodised aluminium, black satin anodised...