fixing There are 3 different methods to wall or surface mount these panel fixings. The Micro, Mini and Maxi fixings maybe secured by METHOD 1 only. Fixings PSD.1 - PSD.5 and PE.1 - PE.6 may be secured by METHODS 2 or 3 only. panel fixings signage Please state your preference at time of order. counter tops METHOD 1 - SCREW FIXED For fixing Micro 15.35, Mini 15.27 and Maxi 3.26. METHOD 2 - BOLT FIXED Washer M8 Dome Headed Allen Bolt Fixings PSD.1 - PSD.5 and PE.1 PE.6 can be fixed on to M8 bolt or stud fixing. METHOD 3 - OLIVE FIXED Locking Grub Screws Fixings PSD.1 - PSD.5 and PE.1 PE.6 may also be fixed using this alternative method. SHOPKIT DESIGNS LIMITED 100 Cecil Street, Watford, Hertfordshire WD24 5AD England Tel: 01923 818282 Fax: 01923 818280 email: [email protected] solid panels

panel fixings Shopkit introduces two new ranges of high quality panel fixings to our existing components range. Standard sizes are avaliable in either version, with other sizes available to special order. They provide an easy method to wall-mount sign panels, or create a raised counter top. 2 methods of fixing the panel are provided: either by clamping through the panel with holes drilled accordingly, or by clamping the edge of the panel. A wide variety of materials and finishes are offered, with other finishes available to special order. Pick a colour: 1 red anodised aluminium 2 gold anodised...

panel supports These panel supports provide an easy method to wall-mount sign panels, or create a raised counter top, and can be produced to hold glass or solid panels up to 25mm thick. PSD.4 in satin anodised aluminium, clamped through 8mm toughened glass The Micro wall fixed panel support holds panels up to 10mm thick and screws down to zero. Panels require drilling with 9mm holes. optional Vandal Proof fixing head The Mini and Maxi wall fixed panel supports hold panels between 0-10mm thick. Panels require drilling with 13mm holes. The standard size components PSD.1 to PSD.5 (inclusive) will...

edge fixed panel supports The nylon-tipped grub screw in components PE.2 to PE.6 (inclusive) is designed to hold panels 6-10mm thick. *Please note that component PE.1 will hold panels between 3-6mm thick. These edge fixed panel supports provide an easy method to wallmount sign panels, or create a raised counter top, they are designed for glass or solid panels ranging in thickness from 3 - 10mm depending on which component is used. IF DOUBT CHECK WITH THE TECHNICAL SUPPORT TEAM ON 01923 818282 6 material and colour finishes are available (see introduction page for details) with specials available...