Sherwin Williams. GREENGUARD Harmony® Interior Acrylic Flat B05-1000 Series CHARACTERISTICS • Formaldehyde Reducing Technology helps improve indoor air quality by reducing VOCs from possible sources like insulation, carpet, cabinets and fabrics.1 • Odor Eliminating Technology helps reduce common indoor odors so rooms stay fresher, longer.1 • Anti-microbial agents inhibit the growth of mold and mildew on the paint surface and inhibit the growth of bacterial odors. • Zero VOC formula tinted with ColorCast Ecotoner® Colorants that do not add VOCs when tinted. • Great hide and a durable finish that withstands frequent washings. • Harmony's Formaldehyde Reducing Technology has been tested by a third-party laboratory. Color: Most Colors To optimize hide and color development, always use the recommended P-Shade primer Coverage: 350-400 sq ft/gal @ 4 mils wet; 1.8 mils dry Drying Time, @ 77°F, 50% RH: Touch: 1 hour Drying and recoat times are temperature, humidity, and film thickness dependent Flash Point: N/A Tinting with CCE only: Base oz/gal Strength Vehicle Type: 100% Acrylic VOC (less exempt solvents): <50 g/L; 0.42 lb/gal As per 40 CFR 59.406 and SOR/2009-264, s.12 Volume Solids: 45 ± 2% Block 1 ct. Loxon Block Surfacer1 2 cts. Harmony Interior Latex Drywall 1 ct. Harmony Interior Latex Primer 2 cts. Harmony Interior Latex Masonry 1 ct. Loxon Concrete & Masonry Primer/Sealer1 or Harmony Interior Latex Primer 2 cts. Harmony Interior Latex Plaster 1 ct. Premium Wall & Wood Primer1 or Harmony Interior Latex Primer 2 cts. Harmony Interior Latex Wood, Composition Board 1 ct. Premium Wall & Wood Primer1 or Harmony Interior Latex Primer 2 cts. Harmony Interior Latex * These primers contain relatively low amounts of VOCs, but could result in minor, noticeable odors. Other primers may be appropriate. When repainting involves a drastic color change, a coat of primer will improve the hiding performance of the topcoat color. SURFACE PREPARATION WARNING! Removal of old paint by sanding, scraping or other means may generate dust or fumes that contain lead. Exposure to lead dust or fumes may cause brain damage or other adverse health effects, especially in children or pregnant women. Controlling exposure to lead or other hazardous substances requires the use of proper protective equipment, such as a properly fitted respirator (NIOSH approved) and proper containment and cleanup. For more information, call the National Lead Information Center at 1-800-424-LEAD (in US) or contact your local health authority. Remove all surface contamination by washing with an appropriate cleaner, rinse thoroughly and allow to dry. Existing peeled or checked paint should be scraped and sanded to a sound surface. Glossy surfaces should be sanded dull. Stains from water, smoke, ink, pencil, grease, etc. should be sealed with the appropriate primer/sealer. Drywall Fill cracks and holes with patching paste/ spackle and sand smooth. Joint compounds must be cured and sanded smooth. Remove all sanding dust. Masonry, Concrete, Cement, Block All new surfaces must be cured according to the supplier's recommendations— usually about 30 days. Remove all form release and curing agents. Rough surfaces can be filled to provide a smooth surface. If painting cannot wait 30 days, allow the surface to cure 7 days and prime the surface with Loxon Concrete & Masonry Primer/Sealer. The length of time Harmony actively reduces odors and formaldehyde depends on the concentration, the frequency of exposure and the amount of painted surface area.

Sherwin Williams. Harmony® Interior Acrylic Flat B05-1000 Series SURFACE PREPARATION Plaster Bare plaster must be cured and hard. Textured, soft, porous, or powdery plaster should be treated with a solution of 1 pint household vinegar to 1 gallon of water. Repeat until the surface is hard, rinse with clear water and allow to dry. Wood Sand any exposed wood to a fresh surface. Patch all holes and imperfections with a wood filler or putty and sand smooth. Mildew Remove before painting by washing with a solution of 1 part liquid bleach and 3 parts water. Apply the solution and scrub the mildewed...