Cashmere® Interior Acrylic Flat Enamel D16-150 Series characteristics Cashmere Interior Latex glides on buttery smooth and levels out... giving walls an elegant, silky rich look. The result is a difference you can definitely see and feel. • Ultra-smooth, rich, silky finish. • Silky, low-stipple appearance that looks good from all angles. • Looks, feels and applies smooth and buttery. • Outstanding coverage and hide. • Scrubbable for easy cleaning and maintenance. • Ideal for residential spaces. Color: Most colors Drying and recoat times are temperature, humidity, and film thickness dependent Coverage: 350 - 400 sq ft/gal @ 4 mils wet; 1.6 mils dry Drying Time, @ 77°F, 50% RH: Touch: 1 hour Drying and recoat times are temperature, humidity, and film thickness dependent Flash Point: N/A Tinting with CCE: Base oz/gal strength Vehicle Type: Acrylic D16W00151 VOC (less exempt solvents): <50 g/L; 0.42 lb/gal As per 40 CFR 59.406 and SOR/2009-264, s.12 Volume Solids: 39 ± 2% specifications Block 1 ct. Loxon Block Surfacer 2 cts. Cashmere Interior Latex Drywall 1 ct. Premium Wall & Wood Primer 2 cts. Cashmere Interior Latex Masonry 1 ct. Loxon Concrete & Masonry Primer/Sealer 2 cts. Cashmere Interior Latex Plaster 1 ct. Premium Wall & Wood Primer 2 cts. Cashmere Interior Latex Wood 1 ct. Premium Wall & Wood Primer 2 cts. Cashmere Interior Latex Other primers may be appropriate. When repainting involves a drastic color change, a coat of primer will improve the hiding performance of the topcoat color. surface preparation WARNiNG! Removal of old paint by sanding, scraping or other means may generate dust or fumes that contain lead. Exposure to lead dust or fumes may cause brain damage or other adverse health effects, especially in children or pregnant women. Controlling exposure to lead or other hazardous substances requires the use of proper protective equipment, such as a properly fitted respirator (NIOSH approved) and proper containment and cleanup. For more information, call the National Lead Information Center at 1-800-424-LEAD (in US) or contact your local health authority. Remove all surface contamination by washing with an appropriate cleaner, rinse thoroughly and allow to dry. Existing peeled or checked paint should be scraped and sanded to a sound surface. Glossy surfaces should be sanded dull. Stains from water, smoke, ink, pencil, grease, etc. should be sealed with the appropriate primer/sealer. Drywall Fill cracks and holes with patching paste/ spackle and sand smooth. Joint compounds must be cured and sanded smooth. Remove all sanding dust. Masonry, Concrete, Cement, Block All new surfaces must be cured according to the supplier's recommendations— usually about 30 days. Remove all form release and curing agents. Rough surfaces can be filled to provide a smooth surface. If painting cannot wait 30 days, allow the surface to cure 7 days and prime the surface with Loxon Concrete & Masonry Primer/Sealer.

Sherwin Williams. Cashmere® Interior Acrylic Flat Enamel D16-150 Series surface preparation Plaster Bare plaster must be cured and hard. Textured, soft, porous, or powdery plaster should be treated with a solution of 1 pint household vinegar to 1 gallon of water. Repeat until the surface is hard, rinse with clear water and allow to dry. Wood Sand any exposed wood to a fresh surface. Patch all holes and imperfections with a wood filler or putty and sand smooth. Mildew Remove before painting by washing with a solution of 1 part liquid bleach and 3 parts water. Apply the solution and scrub the mildewed...