NAPA PLANK 8X32

Product catalog summary

Product Overview:
NAPA PLANK 8X32 is a glazed porcelain tile designed for commercial applications. It is available in various colors, including 700 Cask, and is suitable for use in exteriors, floors, and walls.

Specifications:

Tile Size: 7.9" x 31.5" (20.07 cm x 80.01 cm)
Construction: Porcelain
Edges: Pressed
Wear Rating: Group 4
Break Strength: 250
Water Absorption: 0.50%
DCOF: 0.42

Standards and Recommendations:

The DCOF value of > 0.42 is the standard for commercial tiles as per A137.1-2012, Section 9.6, replacing the previous SCOF value of > 0.60.
Tiles with DCOF values less than 0.42 are not recommended for wet or slippery conditions due to potential slip hazards.
ANSI standard A137.1 section 6.2.2.1.10 provides further guidance on tile use in slippery conditions.

Manufacturer's Warning:

Exercise caution when selecting tiles for areas exposed to water, oil, or grease, as these conditions can increase slipperiness.
Not recommended for use on ramps.
Shade variations are inherent in natural products; final selections should be made from actual tiles rather than samples.

Catalog excerpts

glazed porcelain shaw oors.com For reference purposes only if printed or downloaded.

Open the catalog to page 1

Style Number CS75M Construction Porcelain Tile Type Floor Tile Size 7.9” x 31.5” | 20.07 cm x 80.01 cm Edges P ressed Installation Area Exteriors, Floors, Walls Technical Wear Rating Group 4 A DCOF value of > 0.42 is the new standard for tiles specified for commercial application in standard A137.1-2012, Section 9.6. It replaces the SCOF value of > 0.60 referenced in ASTM C1028. For more information on the correlation between the two values and about the DCOF AcuTest visit the Tile Council of North America’s website: www.tcnatile.com MANUFACTURER’S WARNING: - Tiles with DCOF AcuTest values less...

Open the catalog to page 2

All Shaw floors catalogs and technical brochures

Archived catalogs

Residential Carpet Warranty Information
21 Pages