USER MANUAL

P-6 POI All dimensions in millimeters and inches. Drawing not to scale. P-6 SERIES user manual rev. c © 2018 SGM Light A/S®. The information in this document is subject to change without notice. SGM and all affiliated companies disclaim liability for any injury, damage, direct or indirect loss, consequential or economic loss, or any other loss occasioned by the use of, inability to use, or reliance on the information contained in this manual. The SGM logo, the SGM name, and all other trademarks in this document pertaining to SGM services or SGM products are trademarks owned or licensed by SGM,...

Safety information Read the following safety precautions carefully before unpacking, installing, powering, or operating the device. SGM luminaries are intended for professional use only. They are not suitable for household use. Les luminaires SGM sont impropre à l’usage domestique. Uniquement à usage professionnel. This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved. Ce produit doit être installé selon le code d’installation pertinent, par une personne qui connaît bien...

Overview The P-6 / P-6 POI is an RGBW LED luminaire with high output, designed for multiple applications, including applications where wireless operation is essential. P-6 Series features: • Powerful RGBW LED luminaire, with 24RGB x 24White LEDs divided in six individually controllable segments, weighing around 12 kg. • A wash light, a strobe light, a flood light, a pixel light, and a blinder with a non-fading continuous output. • IP66-rating enable operation in all kinds of environmental settings and in temperatures from -40° C to 50° C. • Fully adjustable CTC from 2,000K to 10,000K. • Built-in...

Preparing for installation Unpacking Unpack the device and inspect it to ensure that it has not been damaged during transport. The P-6 / P-6 POI is shipped with: • 1 x TRUE1 input power cable, 2m./78in. (standard only). In POI versions, it is supplied a power cable with bare ends. • Two Omega brackets with 1/4-turn fasteners (standard only) • 1 x Spanner with magnet (POI only) • Safety information leaflet Location / application The fixture is IP66-rated and designed for both indoor and outdoor installations. This means that it is protected from: • Dust, to the degree that dust cannot enter...

Rigging process using SGM Omega brackets Start the rigging process by blocking the lower working area, and make sure the work is performed from a stable platform. Omega bracket 1. Check that the clamp/bracket is undamaged and can bear at least 10 times the weight of the fixture. Check that the structure can bear at least 10 times the weight all installed fixtures, lamps, cables etc. 2. Bolt the clamp/bracket securely to the omega bracket with a M12/ ½” bolt (min. grade 8.8) and a lock nut. 3. Align the omega bracket(s) with two 1/4 turns of the P-6 base. For standard Omega Bracket, insert the...

Connecting AC power The P-6 Series can operate on any 100-277 V, 50/60 HzAC mains powersupply. Connect a P-6 standard to AC power using the suppliwWcable with a powerCON TReEl ponnector, orsimilar witlz a maximum or20 A, to ensure the correct irgresr (rotection (IP-rating). The fixture must be grounded/earthed and able to be isolated from AC power. The AC power supply must incorporate a fuse or circuit breaker for fault protection. Figure 6: P-6 Power cable The power cable color coding is given in figure 7: • Connect ths black wire to live • Connect the white wire to neutral • Connect the...

Using the display panel • Press the ‘ENTER’ button to access the menu or make a selection. • Press the arrow buttons to scroll up and down in the menus. • Press the ‘ESC’ button to take a step back in the menu. Display A - Operational mode (quick color, stand-alone, or DMX mode). B - DMX address. C - External data indicator (if DMX control is active). D - External data protocol (CRMX™ or DMX). E - Next available DMX address depending on the fixtures DMX footprint. Please note: by default, the fixture is set to be controlled in DMX mode. Figure 9: Display view Error Indicator If any errors are...

Configuring the device for DMX control About DMX The P-6 Series can be controlled using signals sent by a DMX controller on a number of DMX channels. DMX is the USITT DMX512-A standard, based on the RS-485 standard. The signal is sent as DMX data from a console (or a controller) to the fixtures via a shielded twisted pair cable designed for RS-485 devices. The cables can be daisy chained between the fixtures, and up to 32 fixtures can be connected on the same DMX link. Up to 300 meters (1000ft.) of cable is achievable with high quality DMX cables. In installations with standard fixtures, remember...

P•6 CONNECTION DIAGRAM P-6 Connection Diagram DMX Termination on last fixture DMX out DATA GND DATA DATA + 120 Ohm +/- 5% Figure 11: P-6 connection diagram (see page 17 for POI) SGM Light A/S ·· Sommervej 23 · 8210 Aarhus V · Denmark Tel +45 70 20 74 00· · [email protected] · www.sgmlight.com Using standalone operation Standalone operation is not running when the fixture is connected to a control device, but when it is pre-programmed with a series of up to 24 scenes, playing continuously in a loop. Up to three stand-alone programs can be defined and run from the menus, and one of the programs...

Fixture properties Factory default When restoring factory defaults in the P-6, the following settings will be set: • • • • • • • DMX address = 1 DMX mode = Default mode (6 channel) Startup mode = DMX Display saver = Off Flip screen = Off RDM device label set to = Fixture type name Internal program reset Effects The P-6 Series is a luminaire with 24 high-power RGBW and white LEDs, divided in 6 individually controllable segments, which generates wide-ranging color effects and pixel-mapping combinations for creative lighting designs. Figure 13: P-6 Pixel segments Color temperature correction The...