LuxRaff® Antiscratch
2Pages

TECHNICAL INFO Satin glass Antiscratch glass LuxRaff®. It’s high resistance to scratches and stains makes it the ideal solution for demanding applications such as kitchen counters, tables, floors and pavements,... In order to enjoy for a long time its best conditions, we propose to follow these recommendations: CLEANING AND MAINTENANCE LuxRaff® can be cleaned with the market’s full range of cleaning products, except for those which are very aggressive or abrasive. The choice of the sponge is very important to avoid damaging the surface: it is recommended to use a microfiber cloth or white stone (Magic Cleaner). Only use scourer if it’s suitable for vitroceramics. At each spot, its solution To remove common limescale stains in the bathroom, use household soap or specific soap for baths. For the toughest stains you can use a specific limescale remover. To prevent lime deposits, dry the surface after cleaning. In the kitchen best results are achieved with degreasing products, being also suitable the multipurpose products. For lime stains, follow the same instructions as for the bath. Do not let the spots dry out. The same spot is cleaned much better if removed in a few minutes than being left for hours. For dried stains, use the same cleaning product but we have to rub more insistently, so it’s essential not to use abrasive scouring pads. With a good rinse, brightness is perfect. LuxRaff® has a special and characteristic luster. A good rinse is needed to be sure there are no traces of cleaning agent, causing the loss of this brightness. A final rinse with specific window cleaner highlights the brightness and avoids cloth marks. When LuxRaff® is wet, the surface can show temporary visual effects, which disappear completely when dry. P.I. Can Torrella, Rda. Shimizu, 16 - 08233 Vacarisses (Barcelona, Spain) - T.+34.93 828.03.33 info@sevasa.com www.sevasa.com

LuxRaff® remains unchanged over time, doesn’t degrade and it’s cleaned very easily. However, its daily use might diminish brightness due to imperceptible dirt remnants on surface. It is therefore recommended to clean LuxRaff® twice a year with Radora Brillant, particularly suited product to recover the original glass brightness (follow Radora Brillant instructions to achieve a homogeneous bright. Do not use more than 4 times per year). PRECAUTIONS Probably your LuxRaff® glass has been tempered. This procedure makes it solid, but still breakable. Avoid overload and pressure on edges that can...