*myarchiexpo

Catalogs
SERENISSIMA
I TRAVERTINI

I TRAVERTINI

Product catalog summary

Specifications and Design Considerations
The design of tiled surfaces should be managed by an expert designer who calculates the dimensions of the sub-base, cement layers, bedding layer, and the entire laying system. This includes considering the structure, intended use, expected loads, and various stresses on the tiled surface. The designer must specify every detail of the site, including laying methods, materials, joint sizes, and locations of structural and expansion joints.

Laying Operations
1. Choose tiles based on aesthetic and technical requirements, considering the style and intended use of the space.
2. Avoid edge-to-edge laying without joints, especially for exterior applications. Recommended joint widths are 2 mm for rectified products and 4-5 mm for non-rectified products.
3. Specify if materials are for multiformat laying when ordering.
4. Serenissima stoneware tiles can be laid with traditional mortar or adhesive.
5. Follow professional standards and instructions from the designer and site manager.
6. Adhere to manufacturer’s instructions regarding material working times.
7. Inspect materials before installation; claims on installed materials are not accepted.
8. Test the overall effect by laying at least 3 sqm of product.
9. Leave at least a 3 mm grout line between tiles due to vitrification tolerances.
10. Do not mark tiles with pencils or pens.
11. Wait 48-72 hours before walking on the floor.
12. Do not stagger strips by more than 25% of their length.

Guidelines for Laying Rectified Materials
Maintain a minimum 2 mm joint for single format installations. Closed joint tiling is not recommended due to potential structural movement, thermal expansion issues, and grouting difficulties.

Grouting
1. Use grout with matching color shades; avoid dark grout on light materials.
2. Grout only when the floor is safe to walk on and joints are clean.
3. Follow professional standards and instructions from the designer and site manager.
4. Grout small areas at a time and remove excess with sponges or machines.
5. Clean cement-based grout residue with a damp sponge and acid-based detergents after 4-5 days.
6. Follow manufacturer’s instructions for epoxy grouts and those with additives.

Cleaning and Maintenance
Initial cleaning after installation is crucial for long-term maintenance. Use acid-based cleaning to remove construction residues. Routine maintenance should use neutral detergents, avoiding acid or alkaline products. For heavy dirt, use suitable detergents and rinse thoroughly.

Recommendations
Avoid using stain removers with hydro-fluoric acid. Cleaning characteristics vary based on laying method and conditions. Serenissima is not responsible for issues arising from incorrect laying or cleaning.

Treatment of Honed and Polished Products
After laying, use acid cleaners followed by anti-stain protection to maintain the aesthetic and technical features of glazed porcelain.

Specifications and Recommendations:
Enissima advises using a minimum joint width of 2 mm for laying rectified products. When using cement and sand grout, it is recommended to use sealants in matching colors, avoiding dark colors for light materials. Seal small areas and remove excess with sponges or specialized machines. Ensure tiles are walkable before sealing gaps and remove any residues beforehand. Follow professional guidelines for sealing and cleaning.

Cleaning and Maintenance:
Proper cleaning after installation is crucial for the longevity and maintenance of ceramic tiles. An acid wash can remove residues like glue and paint. It is important to wet the surface before acid cleaning to protect the joints. Use alkaline detergents to remove grease before acid cleaning. Rinse thoroughly with clear water after cleaning. Daily maintenance should use neutral detergents and avoid abrasive tools, especially on glossy surfaces. For persistent dirt, use appropriate detergents.

Special Care for Metalized Tiles:
Use only neutral pH products for cleaning metalized tiles and avoid leaving detergents on the surface for more than 10-15 minutes. Always rinse thoroughly.

Warnings and Precautions:
Avoid using hydrofluoric acid-based detergents as they can cause irreversible damage. Cleaning characteristics can vary based on installation and usage conditions. Serenissima disclaims responsibility for improper cleaning or installation.

Installation Guidelines:
Proper installation involves careful selection of tiles, adhesives, and joint widths. Avoid jointless installation, especially outdoors. Ensure materials are processed according to manufacturer instructions. Check materials before installation as complaints for installed products are not accepted. Use a minimum 3 mm joint for Serenissima tiles due to their high sintering degree. Avoid using lead or felt-tip pens on tiles.

Grouting:
Use colored grout in similar tones to the tiles. Grout small areas and remove excess immediately. Follow professional guidelines for grouting and cleaning. For epoxy or latex-modified grouts, follow manufacturer instructions carefully.

Post-Installation Cleaning:
Post-installation cleaning is crucial for future maintenance. Acid-based cleaning removes installation residues. Ensure joints are fully dried before cleaning. Use acid-based products once and rinse thoroughly. Avoid cleaning when tile temperatures are high.

Cleaning and Maintenance Guidelines for Construction Site Residue
Initial Cleaning:
Over 90% of complaints on construction sites are due to inadequate cleaning after tile installation. Acid-based cleaning is essential, but the floor must be wetted first to protect cement-based joints from corrosion. If cleaning occurs after use, start with an alkaline cleaner for oil and grease, followed by an acid-based cleaner. Rinse thoroughly with water.

Post-Construction Cleaning:
Conduct cleaning after the cement grout has dried completely (36-48 hours). This acid-based cleaning should be done once to ensure chromatic uniformity.

Regular Maintenance:
Use neutral cleaners with water. Avoid acid, alkaline, wax, impregnation agents, and metal sponges, especially on glossy surfaces. For structured surfaces or heavy dirt, use an alkaline cleaner and rinse with water. Use machines for larger areas. Place a doormat at entrances to reduce abrasive dirt like sand and dust.

Extraordinary Maintenance:
If regular cleaners are ineffective, use specific cleaners as needed.

Care for Metallized Materials:
Do not use acid or alkaline cleaners. Use neutral pH products and test on a few tiles first. Rinse thoroughly with water.

Recommendations:
Avoid cleaners with hydrofluoric acid (HF) as they cause permanent damage to tiles. Cleaning properties vary based on installation, usage, surface, and location. Rougher tiles are harder to clean. Always conduct a preliminary test on non-installed material. Serenissima is not responsible for issues due to improper installation, cleaning, or material selection.

Cleaning Products:
Follow packaging instructions for listed detergents. Conduct tests on tiles before use, especially on polished or ground products.

Manufacturers:
Fila Industria Chimica, Mapei S.p.A., Kerakoll S.p.A., Bonasystems Italia S.r.l., Faber Chimica S.r.l., Periscopio s.r.l.

Catalog excerpts

Metro |Grey | Metro Sand | Metro Slate | Metro Titan Beige Crema | Grigio 80x80 - 18"x36" || 60x60 --24"x24" | |30x60 - 12"x24" | |30,4x60,8 - 12"x24" 45x90 32"x32" 40x80 16"x32" 20x80 - 8"x32" 60x60 - 24"x24" | 30x60 - 12"x24" Slate 40x80 . . 18"x36" lux-rett / Battiscopa 7,5x60 . 3"x24" lux-rett Grigio 45x90 16"x32" rett

Open the catalog to page 1

Open the catalog to page 2

Mosaico Intreccio Crema 30x30 . 12"x12" lux-rett

Open the catalog to page 3

10 mm - 3/a" spessore . thickness. epaisseur. starke. mon^UHQ Colours Mosaici . Mosaics. Mosaiques. Mosaiken . MosauKa Beige Crema Grigio 30x30 - 12"x12" Foglio. Sheet. Feuille. Blatt. ^ucm 1036696 Mosaico Travertino mix Beige-Crema tessera 2,2x2,2 . WxW lux-rett • B22 1043734 Mosaico Travertino mix Noce-Crema tessera 2,2x2,2.7/8"x7/8" lux-rett • B22 1038235 Mosaico Intreccio Beige rett • B16 (Tozzetto Crema) 1038400 Mosaico Intreccio Crema rett • B16 (Tozzetto Makori lapp) 131 1038237 Mosaico Intreccio Crema lux-rett • B17 (Tozzetto Makori lapp) 1043741 Mosaico Intreccio Grigio lux-rett • B17...

Open the catalog to page 4

CARATTERISTICHE TECNICHE Technical characteristics. Caractéristiques techniques. Technische daten. Texнические характеристики. GRES FINE PORCELLANATO SMALTATO GLAZED FINE PORCELAIN STONEWARE - GRÈS CÉRAME FIN ÉMAILLÉ - GLASIERTES FEINSTEINZEUG - ТОНКОГО ГЛАЗУРОВАННОГО ФАРФОРОВОГО КЕРАМОГРАНИТА Proprietà fisico-chimiche Phisical chemical properties / Propriétés physico chimiques Physisch chemische Eigenschaften / Физико химические свойства Metodo di prova Standard of test / Norme du test Testnorm / Метод испытаня Surfaces . Surfaces . Oberflächen . Поверхности Serenissima, nell’intento di fornire...

Open the catalog to page 5

CARATTERISTICHE TECNICHE Technical characteristics . Caractéristiques techniques . Technische daten . Texнические характеристики. Laying and cleaning . Pose et lavage . Verlegung und Reinigung La resistenza allo scivolamento è una caratteristica che ricade su sicurezza e salute degli utilizzatori, ovviamente nel caso di pavimentazioni. Le superfici scivolose sono potenziali cause di infortuni, anche gravi sia in ambito civile che negli ambienti di lavoro. La grandezza che quantifica la resistenza allo scivolamento è il coefficiente di attrito (statico o dinamico), al quale è proporzionale la...

Open the catalog to page 6

POSA E PULIZIA Laying and cleaning . Pose et lavage . Verlegung und Reinigung Con il lavaggio acido dopo posa si eliminano i residui di posa e il normale sporco di cantiere come: malta, colla, pittura, sporco da cantiere di varia natura. E’ bene sapere che oltre il 90% delle contestazioni in cantiere è dovuto ad un cattivo, o addirittura inesistente, lavaggio con detergente acido dopo posa. Per evitare che un prodotto a base acida usato per la prima pulizia vada ad intaccare il riempimento a base cementizia delle fughe, è necessario, prima dell’operazione di pulizia, bagnare il pavimento affinché...

Open the catalog to page 7

POSA E PULIZIA Laying and cleaning . Pose et lavage . Verlegung und Reinigung CONSEILS POUR LA POSE La réalisation optimale d’un carrelage en grès cérame de Serenissima est due non seulement aux qualités techniques et esthétiques du matériel, mais aussi à un ensemble d’éléments (fond, couche de liant, joints de dilatation, ect.) constituant un véritable système. Les opérations de pose, exécutées dans la suite exacte, doivent etre considérées importantes comme le choix des carreaux. Pour le choix du produit collant plus convenable et pour les modalités d’application, il est conseillé de se conformer...

Open the catalog to page 8

POSA E PULIZIA Laying and cleaning . Pose et lavage . Verlegung und Reinigung peinture, ciment, etc. ... Nous vous rappelons que 90% et plus des litiges sur les chantiers sont dus à de mauvaises applications de produits de nettoyage à base d’acides, ou encore à la complète absence de traitements après la pose. Pour éviter que le lavage après la pose à base acide puisse détériorer le ciment des joints, il est nécessaire de mouiller la surface pour permettre l’absorption d’eau et donc la protection contre l’action érosive sur les joints. Si le premier nettoyage après la pose doit être fait après...

Open the catalog to page 9

Installation and maintenance guidelines . Indications pour la pose et I'entretien . Hinweise zur verlegung und pflege BONASYSTEMS Italia S.r.l. Via Borgo S. Chiara, 29 - 30020 Torre di Mosto (VE) ITALY Tel +39 0421 325691 - www.bonasystemsitalia.it FABER CHIMICA S.r.l. Via G. Ceresani, 10 - Localita Campo d'Olmo - 60044 Fabriano (AN) - ITALY Tel. +39 0732-627178 - www.faberchimica.com FILA Industria Chimica S.p.A. Via Garibaldi, 32 - 35018 San Martino di Lupari (Padova) - ITALY Tel. 049.946.73.00 - www.filachim.com REINIGUNG NACH DER VERLEGUNG Die Reinigung nach der Verlegung ist von ausschlaggebender...

Open the catalog to page 10

SERENISSIMASi Via A. Volta 23/25 42013 Casalgrande (RE) Italy Tel. +39-0522-998411 Fax Italy +39-0522-841338 Fax Export +39-0522-996218 www.serenissima.re.it

Open the catalog to page 11

I TRAVERTINI

I TRAVERTINI

Catalog excerpts

All SERENISSIMA catalogs and technical brochures