ALISE 2200 SERIES ALUMINIUM SHUTTERS
ALISE 2200 SERIES ALUMINIUM SHUTTERS
- Profiles: Frame profiles are 65x32mm with vertical slats of 163x25mm.
- Appearance: Grooved every 80mm to mimic wooden shutters.
- Manufacturing: Mitre-joint assembly with aluminium alloy corner cleats, glued with epoxy or polyurethane mastic.
- Accessories: Aluminium shutter stops and fasteners for open position.
- Fitting: Expansion bolts or hinge pins.
- Finish: 20-micron anodisation or lacquering with QUALICOAT and QUALIMARINE labels.
- Options: Various handle and locking mechanisms.
- Profiles: Vertical slats of 163x25mm, Z-braces with 52x18mm profiles.
- Appearance: Z-brace visible indoors, decorative strap-hinges outdoors.
- Manufacturing: Z-braces screwed onto slats, strap-hinges with bolts.
- Accessories: Similar to solid shutters with frame.
- Fitting: Same as above.
- Finish: Same as above.
- Options: Similar handle and locking options.
- Profiles: Frame profiles 65x32mm, horizontal slats 50x8mm.
- Appearance: Gaps between slats like wooden shutters.
- Manufacturing: Mitre-joint assembly with corner cleats, slats assembled with frames.
- Accessories: Similar to other shutters.
- Fitting: Same as above.
- Finish: Same as above.
- Options: Similar handle and locking options.
- Profiles: Frame profiles 65x32mm, horizontal slats 117x25mm.
- Appearance: Fictitious gaps between slats.
- Manufacturing: Similar to louvered shutters with gaps.
- Accessories: Similar to other shutters.
- Fitting: Same as above.
- Finish: Same as above.
- Options: Similar handle and locking options.
- Profiles: Frame profiles 54x32mm, horizontal slats 50x8mm, intermediate cross rail 134mm.
- Appearance: Gaps between slats, typical of Nice, France.
- Manufacturing: Similar to other louvered shutters.
- Accessories: Includes hinges and tipping latch for sub-sections.
- Fitting: Same as above.
- Finish: Same as above.
- Options: Similar handle and locking options.
- Profiles: Inactive frame 55mm thick, active opening profiles vary.
- Appearance: Options for vertical slats, horizontal slats with or without gaps.
- Manufacturing: Mitre-joint assembly with corner cleats, slats assembled with frames.
- Fitting: Same as above.
- Finish: Same as above.
- Options: Various handle and locking mechanisms.
Catalog excerpts
ALISE 2200 SERIES ALUMINIUM SHUTTERS SOLID SHUTTERS WITH FRAME ALISE 2200 SERIES ALUMINIUM SHUTTERS SOLID SHUTTERS WITH FRAME
Open the catalog to page 1
ALISE 2200 SERIES ALUMINIUM SHUTTERS SOLID SHUTTERS WITH FRAME PROFILES Each leaf comprises a frame made from profiles measuring 65x32mm plus vertical slats made from double tubular profiles measuring 163 x 25mm. APPEARANCE Vertical slat profiles are grooved every 80mm to evoke wooden shutters. MANUFACTURING PROCESS Frame profiles are mitre-joint assembled. Aluminium alloy corner cleats are inserted into the tubing (two cleats per corner). The manufacturer can choose to assemble the profiles by clamping or using studs. Whatever the system, open ends must be tightened automatically. Corner cleats...
Open the catalog to page 2
ALISE 2200 SERIES ALUMINIUM SHUTTERS SOLID SHUTTERS WITH Z-BRACE OR STRAP-HINGE AND COUNTER-STRAP ALISE 2200 SERIES ALUMINIUM SHUTTERS SOLID SHUTTERS WITH Z-BRACE OR STRAP-HINGE AND COUNTER-STRAP
Open the catalog to page 3
ALISE 2200 SERIES ALUMINIUM SHUTTERS SOLID SHUTTERS WITH Z-BRACE OR STRAP-HINGE AND COUNTER-STRAP The vertical slats are made from double tubular profiles measuring 163 x 25mm. Z-braces comprise two profiles: a 52 x 18mm profile screwed onto the slat, plus clip-on cowling to hide the screws. The cowling for the horizontal bars consists in an 80 x 30mm profile moulded in the old-fashioned way. The cowling for the diagonal bar measures 55 x 20mm with canted corner. Expansion bolts or hinges pins that are sealed into the reveal can be used to fit the shutters. In the former case, the expansion bolt...
Open the catalog to page 4
ALISE 2200 SERIES ALUMINIUM SHUTTERS LOUVERED SHUTTERS WITH GAPS ALISE 2200 SERIES ALUMINIUM SHUTTERS LOUVERED SHUTTERS WITH GAPS
Open the catalog to page 5
ALISE 2200 SERIES ALUMINIUM SHUTTERS LOUVERED SHUTTERS WITH GAPS PROFILES Each leaf comprises a frame made from profiles measuring 65 x 32mm and horizontal slats made from tubular profiles measuring 50 x 8mm. APPEARANCE There are gaps between the horizontal slats as is the case with wooden shutters. MANUFACTURING PROCESS Frame profiles are mitre-joint assembled. Aluminium alloy corner cleats are inserted into the tubing (two cleats per corner). The manufacturer can choose to fix corner cleats by crimping or using studs. Whatever the system, open ends must be tightened automatically. Corner cleats...
Open the catalog to page 6
ALISE 2200 SERIES ALUMINIUM SHUTTERS LOUVERED SHUTTERS WITHOUT GAPS ALISE 2200 SERIES ALUMINIUM SHUTTERS LOUVERED SHUTTERS WITHOUT GAPS
Open the catalog to page 7
ALISE 2200 SERIES ALUMINIUM SHUTTERS LOUVERED SHUTTERS WITHOUT GAPS PROFILES Each leaf comprises a frame made from profiles measuring 65 x 32mm and horizontal slats made from non-tubular profiles measuring 117 x 25mm APPEARANCE Although it appears a gap between slat profiles, as is the case with wooden shutters, in this instance the gap is purely fictitious. MANUFACTURING PROCESS Frame profiles are mitre-joint assembled. Aluminium alloy corner cleats are inserted into the tubing (two cleats per corner). The manufacturer can choose to fix corner cleats by crimping or using studs. Whatever the...
Open the catalog to page 8
ALISE 2200 SERIES ALUMINIUM SHUTTERS LOUVERED SHUTTERS WITH GAPS AND HINGED SUB-SECTIONS ALISE 2200 SERIES ALUMINIUM SHUTTERS LOUVERED SHUTTERS WITH GAPS AND HINGED SUB-SECTIONS
Open the catalog to page 9
ALISE 2200 SERIES ALUMINIUM SHUTTERS LOUVERED SHUTTERS WITH GAPS AND HINGED SUB-SECTIONS Each leaf comprises a frame made from profiles measuring 54 x 32mm, horizontal slats made from tubular profiles measuring 50 x 8mm and an intermediate cross rail 134mm tall. Below this intermediate cross rail is a second frame made from 40 x 32 mm profiles. APPEARANCE There are gaps between the horizontal slats as is the case with wooden shutters. An active sub-section in each leaf is typical of shutters used in Nice, France. MANUFACTURING PROCESS Frame profiles are mitre-joint assembled. Aluminium alloy...
Open the catalog to page 10
ALISE 2200 SERIES ALUMINIUM SHUTTERS SLIDING SHUTTERS ALISE 2200 SERIES ALUMINIUM SHUTTERS SLIDING SHUTTERS
Open the catalog to page 11
ALISE 2200 SERIES ALUMINIUM SHUTTERS SLIDING SHUTTERS The visible surface of the profile used for the inactive frame measures 55mm, it is also 55mm thick. The frame is fitted with a roller rail and a closer profile that hides the holes through which it is fixed to the brickwork. The active opening is made from profiles that are 33mm thick with visible surfaces of 43mm for the central jamb, 57mm for the lateral jamb and 62mm for the top and bottom cross rails. Infill slats are: Option No.1: actioned by open aluminium handles with a catch and invisible fittings (Sepalumic ref.: 26095) Colour of...
Open the catalog to page 12
