Installation Overview:
The document provides detailed instructions for the installation of the Quadro Line Open Cell Ceiling system. It includes specifications for various components and accessories required for installation, such as the main suspension channel, splice, spring clips, rods, and panel support profiles. The installation process requires a minimum ceiling void of 100 mm.

System Specifications:
- Material: 0.40 mm Aluminum
- Honeycomb Dimensions: 'U' profile with a base width of 10 mm and height options of 40-60 mm
- Center-to-Center (C/C) spacing: 30-50-60-75-100-120-150 mm
- Panel Sizes: 600x1200 mm or 1200x1200 mm
- Paint: Minimum 20 µ thickness in RAL 9016, RAL 9006, and RAL 9005 or 60 µ thickness for post-painted finishes
- Perforation: Ø2.00 mm with a 17% void ratio

Carrier System and Accessories:
- Carrier Channel (with notches)
- Carrier Channel Splice
- Carrier Joint Wire
- Suspension Wire (600 mm)
- Steel Anchor

Installation Details:
The installation requires marking the lowest point on the wall for the corner profiles after setting up the carrier system. The Delta Line system should form a square with the carrier channel. The distance between the corner and the first notch on the carrier should be half the pitch width. The first suspension set is placed a maximum of 300 mm from the corner. For short side dismantling, the carrier channel is placed every 1200 mm, and for long side dismantling, every 600 mm. Splices are used where carrier channels need to be joined. Connections between the first installed carrier channel and others are made using screws. The panel is connected to the carrier channel using the carrier joint wire and then suspended using the suspension wire.

Contact Information:
Akpınar Mah. Hasan Basri Cad. No:3 Sancaktepe / ISTANBUL
Tel: +90 216 311 80 65 pbx
Fax: +90 216 311 20 04
Website: www.sepa.com.tr