Seplux 20

Product catalog summary

Specifications
The SEPLUX polycarbonate panel is a 20 mm triple-wall panel with a width of 333.3 mm. It is designed for maximum transportable length and weighs 2.95 kg/m². The panel offers 78% light transmission and has a heat transmittance of K = 1.87 (Kcal/h m² °C) or U = 2.20 W/(m² K), which is comparable to or better than double glazing. The minimum bending radius is 4000 mm, and it has a linear expansion of 0.065 mm/m °C. The service temperature range is from -40°C to +120°C, and it has a fire reaction classification of Class B S1 d0. Available colors include transparent, opal, smoke, blue, and green.

Applications and Recommendations
The SEPLUX 20 panel is suitable for vertical applications such as sheds, vertical glazing, and partitions, with a maximum free span height of 180 cm and a load resistance of approximately 70 kg/m². For greater heights and higher loads, the panel should be fastened to the structure using specific stainless steel hooks. The panel is not recommended for inclined and arched roofs; for such applications, SEPLUX 40 or SEPLUX 20 Plus is suggested.

Technical Characteristics
The panel features a modular multi-wall design with a tongue-and-groove joint in co-extruded polycarbonate, UV-protected on one side. It is guaranteed for 10 years against aging. The simplicity of the joint allows for easy installation in wallings, sheds, and strip windows.

Aluminium Profiles
Various aluminium profiles are available, including lower profiles with and without drip stops and upper profiles, to complement the installation of the SEPLUX panels.

Catalog excerpts

TECHNICAL DATA THE POL YCARBONATE PANEL SEPLUX

Open the catalog to page 1

Modular multi-wall panel with tongue-and-groove joint in co-extruded polycarbonate (UV-protected on on side). GUARANTEED 10 YEARS against ageing. Thanks to TECHNICAL CHARACTERISTICS the simplicity of the joint andf their co- planarity, the panels can be used in wallings, sheds, strip windows. DATI TECNICI Panel section maximum transportable Light transmission Heat transmittance K = 1,87 (Kcal/h m2 °C) U = 2,20 W/(m2 K) similar to or better than double glazing 4/12/4 K = 2,6 (Kcal/h m2 °C) Minimum bending radius Linear expansion Service temperature Fire reaction Available colours transparent -...

Open the catalog to page 2

Its particular technical characteristics allow the Seplux 20 panel to be used in vertical applications (sheds - vertical glazing - partitions) with a free span of maximum height 180 cm and a load resistance of appro- Vertical applications ximately 70 kg/m2. For greater heights, higher loads are guaranteed by fastening the panel to the structure using the specific stainless steel hooks, without driIIing. Stainless steel hook for vertical fastening Detail of stainless steel hook for vertical fastening WITH MAXIMUM DEFLECTION 1/50 OF THE SPAN Free span Structure pitch 100 cm PAGE 3/4

Open the catalog to page 3

Supply of walling or vertical glazing in modular panels of thickness 333,3 mm in co-extruded multi wall poly- carbonate, UV-protected on one side. Thickness 20 mm, coplanar and triple-wall, with tongue-and-groove joint. Technical characteristics: transmittance transparent, opal or coloured finish. ALUMINIUM PROFILES possible taping ALUMINIUM PROFILES lower with drip stop eventuale nastratura ALUMINIUM PROFILES lower without drip stop eventuale rastratur ALUMINIUM PROFILES SEP s.r.l. Societa Europea Plastica www.sepitalia.com • [email protected]

Open the catalog to page 4

All SEP catalogs and technical brochures

Archived catalogs

Seplux 20 - 20L
4 Pages