Seplux 20 Plus

Product catalog summary

Specifications:
The SepLux polycarbonate panel is a 20 mm triple-wall panel with a width of 500 mm. It has a maximum transportable length and weighs 2.50 kg/m². The panel offers 78% light transmission and has a heat transmittance of K = 1.87 (Kcal/h m² °C) or U = 2.20 W/(m² K), which is comparable to or better than double glazing. The minimum bending radius is 4000 mm, and it has a linear expansion of 0.065 mm/m °C. The service temperature range is from -40°C to +120°C. It is self-extinguishing with a fire reaction class of B S1 d0 and is available in transparent, opal, smoke, blue, and green colors.

Technical Characteristics:
The panel features a modular multiwall design with a tongue-and-groove joint in co-extruded polycarbonate, UV-protected on one side, and comes with a 10-year guarantee against aging. It is suitable for use in wallings, sheds, canopies, fixtures, strip windows, partitioning, and small roofs. The panels are ideal for sloping roofs with a minimum slope of 12%.

Resistance and Load Capacity:
For roofing applications with a minimum slope of 12%, the panel can withstand a load resistance of 150 kg/m² with a crossbeam pitch of 1000 mm and 180 kg/m² with a pitch of 700 mm. For vertical applications, the panel can be used over a single span with a maximum height of 185 cm and a load resistance of approximately 60 kg/m². For greater heights, stainless steel hooks can be used to increase load capacity without drilling the panel. In vertical applications with crossbeams, the panel can withstand a pressure resistance of 50 kg/m² for a free span of 1400 mm, and up to 125 kg/m² with a crossbeam pitch of 1300 mm, certified by Istituto Giordano.

Aluminium Profiles:
The document also details the use of aluminium profiles, including lower profiles with and without drip stops, and upper profiles, with optional sealing tape available.

Catalog excerpts

TECHNICAL DATA THE POL YCARBONATE PANEL SEPLUX

Open the catalog to page 1

Modular multiwall panel with tongue-and groove-joint in co-extruded polycarbonate (UV-protected on one side) - GUARANTEED 10 YEARS against ageing. Thanks to the simplicity of the joint and to their copla- TECHNICAL CHARACTERISTICS narity, the panels can be used in wallings, sheds, canopies, fixtures, strip windows, partitioning and small roofs. TECHNICAL DATA Panel section maximum transportable Light transmission Heat transmittance K = 1,87 (Kcal/h m2 °C) U = 2,20 W/(m2 K) similar to or better than double glazing 4/12/4 K = 2,6 (Kcal/h m2 °C) Minimum bending radius Linear expansion Service temperature...

Open the catalog to page 2

ROOFINGS The tongue-and groove-joint make the SepLux 20 PLUS panels ideal for sloping roofs with minimum slope 12%. Stainless steel hook for vertical fastening RESISTANCE PANEL STRENGTH IN ROOF WITH MINIMUM SLOPE 12% CROSSBEAM PITCH LOAD RESISTANCE

Open the catalog to page 3

VERTICAL APPLICATION The particular technical characteristics allow use of the SepLux 20 PLUS panel for vertical applications (sheds-vertical glazing-partitioning) over a single span with maximum height 185 cm and a load resis- tance of approximately 60 kg/m². For greater heights, higher loads are achieved by fastening the panel to the structure using the specific stainless steel hooks, which eliminates the need to drill to panel. RESISTANCE VERTICAL APPLICATION FREE SPAN Maximum height Pressure resistance RESISTANCE VERTICAL APPLICATION WITH CROSSBEAMS Crossbeam pitch Pressure resistance Supply...

Open the catalog to page 4

ALUMINIUM PROFILES POLYCARBONATE RANfcUi ALUMINIUM PROFILE lower with drip stop optional sealing tape ALUMINIUM PROFILE lower without drip stop optional sealing tape ALUMINIUM PROFILE SEP s.r.l. Societa Europea Plastica www.sepitalia.com • [email protected]

Open the catalog to page 5

All SEP catalogs and technical brochures

Archived catalogs

Seplux 20 - 20L
4 Pages