on an international scale! The story started in 1838 when Jean-Baptiste Laurent Semin started manufacturing plaster. 1980, Philippe Semin picked up the reins of the family business, which at that time had only seven employees. However, success was just around the corner. 1990, the company developed its activity abroad, in Belgium, Germany and most of Europe. Today, Semin has more than 5000 clients around the world. 1998, in response to the Southern European and Moroccan market, Semin set up a second production plant near Perpignan. 2008, in view of increasing demand, a third factory and a training...

FOR SURFACE PREPARATION PRIOR TO DECORATING SURFACE FINISHING PLASTERING TILING DECORATING FLOORING

Stands specifically designed for your points of sale Display stands with Semin trademark convenient size for good point of sale. SEMIN ON-LINE Security data sheets available on ge Check out our complete ran site our web and new products on SEMIN TECHNOLOGY

PLASTERING FILLERS WORKING TIME WORKING TIME WORKING TIME WORKING TIME WORKING TIME TECHNICAL REPORT N° 9/09-881 25 KG BAGS TECHNICAL REPORT N° 9/09-880 25 KG BAGS PLASTER BLOCK ADHESIVE FILLER QUICK DRYING ADHESIVE FILLER WATER-REPELLENT BONDING COMPOUND BONDING COMPOUND ADHESIVE FILLER WORKING TIME CONSTRUCTION MORTAR ADHESIVE BINDER INTERIOR SPECIAL CELLULAR CONCRETE ADHESIVE REFRACTORY MORTAR QUICK-SETTING MORTAR AND CEMENT WHITE CEMENT HIGH ALUMINA CEMENT QUICK-SETTING CEMENT GREY FINEGRAIN MORTAR QUICK-SETTING MORTAR INTERIOR-EXTERIOR

JOINT CEMENT ULTRA-LIGHT READY MIXED JOINT CEMENT TECHNICAL REPORT N° 9/03-764 7 - 25 KG PAILS FILLER FOR TAPELESS JOINTING TECHNICAL REPORT 15 KG BAGS ADHESIVE FILLER READY TO USE LIGHT PASTE TERRA COTTA BLOCK ADHESIVES Associated with SEMIN  DEGROSSISSAGE ADHESIVE FILLER Associated with KEDOPLAN MUR Filler TERRA COTTA ADHESIVE BINDER CEMENT ADHESIVE BINDER MULTI-PURPOSE ADHESIVE FILLER TECHNICAL REPORT N° 9/99-681 25 KG BAGS TECHNICAL REPORT N° 9/99-682 25 KG BAGS ADHESION PRIMERS FILLER & SURFACER ULTRA light paste PLASTERBOARD PRIMER FILLER & SURFACER ULTRA LIGHT PASTE SPECIAL SMOOTH CONCRETE...

Our sales team at your service OUR SALES MANAGER Mr Thierry Lefeuvre D IVI S I O N OUR SALES TEAM FRANCE n aris Area Managers: P Mr Olivier RAVENEL (Materials merchants) Mr Adrien COMTE (Paint wholesalers) Mr Mathieu THOMAS (Gamme peinture) n Southeast Area Managers: Mr Eric Stefanut (Paint wholesalers) Mr Julien BELLENGER (Materials merchants) n Southwest Area Managers: Mr Charles Henri CAZAC (Materials merchants) Mr Eric STEFANUT (Paint wholesalers) OUR EXPORT SALES TEAM n irecteur des ventes Allemagne : D Mr Daniel Kusber n Responsable Bavière - Autriche - Hongrie Slovénie - Croatie : Mr Helmut...

PLASTERBOARD FIXING ISOCOL MORTIER

ISOCOL MORTIER BONDING COMPOUND FOR PLASTERBOARD TECHNICAL DEFINITION ISOCOL MORTAR is an bonding compound for interior fixing of plasterboard with or without insulation. Also allows filling of gaps between boards. COMPOSITION and APPEARANCE Plaster-based powder filler, containing calcium carbonate and various additives. The mix obtained is white. ACCEPTED SUBSTRATES Any type of plasterboard with paper face, with or without insulation (glass wool, rock wool, polystyrene). • Concrete. • Cement filler. • Render. • Cellular concrete. DOCUMENTS TO CONSULT DTU 25.41 and 25.42 TECHNICAL CHARACTERISTICS...

APPLICATION PRECAUTIONS FOR USE The temperature during application and drying must be between 5 and 30°C. Do not apply to damp substrates. Do not use mix that has begun to set. Do not apply to old paint. PREPARATION OF SURFACES Wall surfaces must be sound, free of dust, oil, and should not sweat damp. In summer, if the substrates are too dry, dampen them slightly. Differences in flatness of up to 15 mm are acceptable. Old substrates covered by mortar/plaster must be checked for soundness and washed down. MIXING FACTOR From 13 to 14 l of water per 25 kg sack. Mixing is preferably mechanical. APPLICATION...

PLASTERBOARD JOINTING CE 78 RAPIDE & TRES RAPIDE PLASTERBOARD JOINTING FILLER SETTING TIME 1/2, 1, 2, 4 HOURS PLASTERBOARD JOINT CEMENT UNIVERSAL SETTING - 8 HOURS PLASTERBOARD JOINT CEMENT AIR DRYING WORKING TIME OVER 24 HOURS ADHESIVE FILLER FOR PLASTERBOARD JOINTING ULTRA LIGHT SEM-JOINT COMPOUND PLASTERBOARD JOINTING FILLER READY-TO-USE ADHESIVE FILLER FOR PLASTERBOARD JOINTING READY TO USE - LIGHT PASTE FILLER FOR TAPELESS JOINTING SETTING TIME 45 MINUTES

PLASTERBOARD JOINTING CE 78 RAPIDE • CE 78 TRES RAPIDE CE 78 PRISE UNIVERSELLE CE 78 LENT • CE 78 LIGHT CE 78 PÂTE • CE 78 PATE LIGHT • CE 86

CE 78 RAPIDE & TRES RAPIDE PLASTERBOARD JOINTING FILLER SETTING TIME 1/2, 1 OR 2 HOURS, 4 HOURS TECHNICAL DEFINITION CE 78 RAPIDE is a powder filler designed specifically for jointing tapered edge plasterboard in combination with a joint tape. 4 hours mix working life. COMPOSITION AND APPEARANCE Powder filler based on plaster, calcium carbonate, resin and various additives. The paste obtained is white. SUITABLE SUBSTRATES All types of plasterboard with or without insulation (glass wool, rock wool, polysty­ ene) with tapered r edges and paper face. COVERING • Primer undercoat for plasterboard...

APPLICATION PRECAUTIONS FOR USE The temperature during application and drying must be between 5 and 30°C. Do not apply to damp substrate. Do not use mix that has begun to set. PREPARATION OF SURFACE Plasterboard must be attached in conformity with DTU 25.41. Cuts made into plasterboard must be on the bevel and dusted. MIXING FACTOR From 10 to 11 l of water per 25 kg sack. APPLICATION Before jointing fill gaps between boards and any irregular joints and repair any damaged board. Apply manually by using a 10 or 15 cm filling knife and apply the tape – milled face against the board. Then apply a...

CE 78 PRISE UNIVERSELLE - 8 H GENERAL PURPOSE FILLER - 8 H PLASTERBOARD JOINTING FILLER TECHNICAL DEFINITION CE 78 RAPIDE 8 h is a powder filler designed specifically for jointing tapered edge plasterboard in combination with a joint tape. Mix working time: 8 hours. An advantageous replacement for CE 78 LENT when the weather conditions (low temperature and high relative humidity) do not allow its application. Just like CE 78 LENT, the tapes can be applied mechanically. COMPOSITION AND APPEARANCE Plaster-based powder joint filler, containing calcium carbonate and various additives. The resulting...