Venetian blinds
15Pages

{{requestButtons}}

Catalog excerpts

Venetian blinds - 3

small bundle height, Slats in Venetian blind C50 Slim are made with addition of magnesium, which makes them more elastic and durable. The head rail is turned upside down to increase functionality and aesthetics. cable guides, Venetian blind C50 Slim was designed for internal use in apartments and offices. flat C-shaped slats, wide range of colours, manual or electric drive, maximum dimensions: width 3m, height 3m, for internal use.

Open the catalog to page 3
Venetian blinds - 4

construction The cover for the Venetian blind is made from 1,2mm or 2,0mm thick aluminium sheet. Depending on chosen configuration, it can be adjusted to fit various façade solutions. drive and automation We offer such solutions from leading European manufacturers as: full weather automation, sun tracking system, silent motors, motors with two-way communication and wireless controls. C50 Slim slats The slats are made of 0,21mm thick and 49mm wide aluminium with magnesium, which makes them more resistant to deformation. Meant for internal use. The tilt angle is 75 degrees. guide rail 2,5...

Open the catalog to page 4
Venetian blinds - 5

Venetian blind C50, unlike traditional solutions available on the market, has more rigid slats, which allow for both internal and external use of the blind. flat C-shaped slats, small bundle height, Smooth control of the slat angle gives the opportunity to freely adjust the light intensity depending on individual needs, thereby improving the comfort of the room. cable guides, wide range of colours, manual (crank) or electric drive, maximum dimensions: width 3m, height 3m, for internal and external use. C50 system in square cassette made from aluminum sheet.

Open the catalog to page 5
Venetian blinds - 6

cassette The cover for the Venetian blind is made from aluminum sheet 1,2mm or 2,0mm thick. Depending on chosen configuration, it can be adjusted to fit various façade solutions. drive and automation We offer such solutions from leading European manufacturers as: full weather automation, sun tracking system, silent motors, motors with two-way communication, wireless controls. C50 slats Made of 0,4mm thick and 49mm wide aluminum. Thanks to their improved stiffness, they can be used both inside and outside. Tilt angle is 75 degrees. guide rail 2,5 CABLE GUIDE Stainless steel guides 2,5mm...

Open the catalog to page 6
Venetian blinds - 7

Venetian blind C80 Cube is a solution with square cassette made of extruded aluminium. Cassette is supported by the rail guides that act as the loadbearing element of the construction. This system is perfect for installation on post-and-beam steel façades. This new solution ensures fast and easy installation. C-shaped slats, possibility of using cable guide (C80L), wide range of colours, manual (crank) or electric drive, maximum dimensions: width 4,5m, height 5m, for external use. C80 system in a cassette made for both façade and modular installation.

Open the catalog to page 7
Venetian blinds - 8

Square cassette made of extruded aluminium, supportec by the guide rails - self-supporting system. This solution is designed for fagade installation. We offer such solutions from leading European manufacturers as: full weather automation, sun tracking system, silent motors, motors with two-way communication, wireless controls. HOME MOTION PW9 ■^^VWVM .^P^^L^Sl ■f^fl. ^^^gg^m^ MOTOR INTERFACE Made of 0,42mm thick and 80,4 wide aluminum. Slats move in the rail guides thanks to durable metal bolts that increase the blind's resistance to strong guide rail CUBE guide rail designed for fagade...

Open the catalog to page 8
Venetian blinds - 9

C80 The C80 blind is the most popular solution among the external Venetian blinds. Each slat has rolled up edges, which give it increased rigidity. C-shaped slats, possibility of using cable guide (C80L), Smooth control of the slat angle gives the opportunity to freely adjust the light intensity depending on individual needs, thereby improving the comfort of the room. wide range of colours, manual (crank) or electric drive, maximum dimensions: width 4,5m, height 5m, for external use. C80 system in a cassette made for both façade and modular installation.

Open the catalog to page 9
Venetian blinds - 10

cassette The cover for the Venetian blind is made from aluminum sheet 1,2mm or 2,0mm thick. Depending on the chosen configuration, it can be adjusted to fit various façade solutions. There is also an oval cassette, made of extruded aluminum, supported on rail guides that act as the load bearing element of the construction. This system is made for use on post-and-beam steel façades, as well as typical façades. drive and automation We offer such solutions from leading European manufacturers as: full weather automation, sun tracking system, silent motors, motors with two-way communication,...

Open the catalog to page 10
Venetian blinds - 11

Venetian blind Z90 Cube is a solution with square cassette made of extruded aluminium. Cassette is supported by the guide rails that act as the loadbearing element of the construction. This new solution ensures fast and easy installation. Z-shaped slats provide better shading, additionally equipped with silencing profile, wide range of colours, manual (crank) or electric drive, maximum dimensions: width 4,5m, height 4,5m, or width 3,2m, height 5m, for external use. Z90 system in a cassette made for both façade and modular installation.

Open the catalog to page 11
Venetian blinds - 12

Square cassette made of extruded aluminium, supported by the guide rails - self-supporting system. This solution is designed for fagade installation We offer such solutions from leading European manufacturers as: full weather automation, sun tracking system, silent motors, motors with two-way communication, wireless controls HOME MOTION by Iffl" PVWOT .^P^Ik^SI ^^1^^ ■hZ^M HH^HH^Hil^H MOTOR INTERFACE Made of 0,42mm thick and 92,5 wide aluminum. Z90 slats have the ability to almost completely close, which is not possible with the traditional shape. The slats are equipped with a silencing...

Open the catalog to page 12
Venetian blinds - 13

Z90 Thanks to its unique shape, the Z90 blind has the ability to almost completely close, which is not possible with the traditional shape. Z-shaped slats provide better shading, additionally equipped with silencing profile, Smooth control of the slat angle gives the opportunity to freely adjust the light intensity depending on individual needs, thereby improving the comfort of the room. wide range of colours, manual (crank) or electric drive, maximum dimensions: width 4,5m, height 4,5m, or width 3,2m, height 5m, for external use. Z90 system in a cassette made for both façade and modular...

Open the catalog to page 13

All Selt Sun Protection Systems catalogs and technical brochures

  1. Pergola

    19 Pages

  2. Sunbreaker

    8 Pages

  3. Awnings

    25 Pages

  4. Refleksol

    35 Pages