POLYGLASS POLYGLASS VShatter-proof synthetic glass, Inside and Outside Shatter-proof Very easy to work Exceptional transparency Cold and hot bending

■I 800 times tougher than glass ■ Very easy to work HI Exceptional transparency HI Self-extinguishing (M2)-standard nf p 92-507 ■ 100% recyclable, does not damage the environment ■ Cold and hot bending (after-stoving not required for the thermoforming) ■I Can be nailed, screwed, drilled, sawn, stapled and cut. • Inside/outside windows • Safety glass • Display cabinets • Framing • Forcing tunnels • Greenhouses, skylights • Roofing • Dome roofs • Shields

STORAGE POLYGLASS has a high shine, is shock resistant and lightweight (half the weight of glass), and is food safety approved. It is easily processed, and can be sawn, cut, drilled, milled, printed on, bonded and welded. It bends easily, both cold and hot. Polyglass sheets should be stored indoors, The sheets and protective film must not be exposed to the sun or rain. If stored vertically, the sheets must be stored at 90º, and must be supported along their entire length. HANDLING We recommend that the sheets are not allowed to slide other one another in order to prevent striping.

Cutting SEDPA cutter or craft knife ^^^Cutting ou Scroll saw or fine-toothed saw. Drilling Metal or wood bits (allow 1.5mm for expansion) Framing Leave an expansion joint of approximately 3mm per linear meter. Anti-vibrations: use a foam or rubber gasket Maintenance Rag soaked in mild detergent.