With a wide range of applications, Multicel Drilling milled, thermoformed, Metal bit (nose angle 100 to 110, angle of torsion 30, cutting speed 50-280 m/min) Leave an expansion joint of approximately 3mm per linear meter. PVC glue and double glue line. welded, printed on and Maintenance MULTICEL MULTICEL Blade or pair of scissors, up to 3mm thick. Hand saw or circular saw. Methylated spirit, universal diluant, trichlorethylene, with a felt pad, soapy water, ammoniacale based window cleaners. Avoid nitrates. TECHNICAL PROPERTIES THERMAL PROPERTIES SPECIAL PROPERTIES SPECIAL PROPERTIES VICAT softening temperature Coefficient of linear thermal expansion Thermal conductivity Heat distortion temperature Surface strength Leakage current resistance Dielectric constant 1.03Hz Dielectric strength Burning behaviour As a result of constant technological developments, the information and presentations contained in the present booklet are given only as an indication and without commitment on our part. SEDPA is committed to providing free-of-charge the replacement of goods which have broken during the guarantee period under the following conditions: - the conditions of installation and recommendations stated previously have been followed, as in our technical notes. - the exclusive use in traditional roofing and cladding applications. - the return of a copy of proof of payment in the 15 days following the purchase. The manufacturer, not having control over the use of the material by others, cannot therefore guarantee the same results as those described in this document. Each user must carry out his own tests to determine up to what point the material corresponds to his needs. The manufacturer and his distributors cannot be held responsible for damage arising from a defective installation of the material. SEDPA France SA - Zone du Bois - BP 9 - 59840 PERENCHIES - FRANCE Tel. 0033.320.00.99.00 - Fax. 0033.320.00.99.29 - E-mail : [email protected] MECHANICAL PROPERTIES Yield stress Shock resistance Shore D hardness Tensile strength Percentage elongation at break Modulus of elasticity Bending modulus Compressive stress GENERAL PROPERTIES PROPERTIES Density Water absorption Rot-proof Light stability Shock resi

Multicel is an opaque expanded rigid PVC sheet. Its homogeneous cellular structure and its glossy surface lend it to all wood and marine plywood applications. Lightweight, with a high shock resistance, and high light and weather stability, Multicel does not absorb water. Flame resistant, this material is a high-performing insulator. Furthermore, Multicel is commonly used for internal architecture as Communication, inside and outside signs, stands, displays. q Frontage q Windbreaks q Partitions q Shower cubicles and bath panels q Interior decoration q well as for all types of DIY. A true synthetic...

Multicel is an opaque expanded rigid PVC sheet. Its homogeneous cellular structure and its glossy surface lend it to all wood and marine plywood applications. Lightweight, with a high shock resistance, and high light and weather stability, Multicel does not absorb water. Flame resistant, this material is a high-performing insulator. Furthermore, Multicel is commonly used for internal architecture as Communication, inside and outside signs, stands, displays. q Frontage q Windbreaks q Partitions q Shower cubicles and bath panels q Interior decoration q well as for all types of DIY. A true synthetic...

With a wide range of applications, Multicel sheets can be embossed, Cutting out Blade or pair of scissors, up to 3mm thick. Metal bit (nose angle 100 to 110, angle of torsion 30, cutting speed 50-280 m/min) milled, thermoformed, welded, printed on and laminated Fixing Leave an expansion joint of approximately 3mm per linear meter. PVC glue and double glue line. Maintenance Methylated spkit, universal diluant, trichlorethylene, with a felt pad, soapy water, ammoniacale based window cleaners. Avoid nitrates. As a result of constant technological developments, the information and presentations...