Technical Catalogue
52Pages

{{requestButtons}}

Catalog excerpts

Technical Catalogue - 1

visual communication

Open the catalog to page 1
Technical Catalogue - 3

Vertical type A/E Vertical type G Flag system H and L Vertical type M and S Indoor type P Horizontal SEGNO Light BIG size wall plate The replacement of the graphic Flag plates Hanging plates On post plates Wall plates Flag plates Outdoor uses SMALL size wall plate Multimodule plate Hanging plates On support, monolith and post On ground posts Stiff hanging posts Single post Flag plates Hanging plates Wall plates Book opening Folding opening Indoor uses Without protection Book opening Folding opening Sliding for indoor uses Wall panels Stiff hanging panels Flag panels Wall plates Hanging...

Open the catalog to page 3
Technical Catalogue - 4

TOTEM - Vertical type A/E Monolith structures displaying a space’s identify or to direct people: sturdy and elegant for external uses. Version with two uprights and convex panels. It’s the best solution for medium-small size. Available both back-ligthed both with external lighting system. Version with two uprights and flat panels. It can be also used to support panels or showcases. Back-lighting system not available. Version with four uprights and flat or convex panels. Click side plates to allow an easier inspection of any lighting system. 1376 You should specify wheter a flat or convex...

Open the catalog to page 4
Technical Catalogue - 5

TOTEM - Vertical type A/E TOP CAP panel made of Dibond 3 mm th. LIGHTING SYSTEM: UPRIGHTS in aluminium powder coated silver RAL 9006 ash grey 007 > BACK-LIGHTING SYSTEM An internal back-lighting system is available by incorporating a neon unit. The lighting system is available for one or more sides and can be fixed to the entire structure or to a particular area only. At the top and lower ends of the back lighting totem, a dark area remains covered with an aluminium band. GRAPHICS & LETTERING - vinyl lettering - polychromatic digital print on vinyl - graphics with laser-cut and back-lighted...

Open the catalog to page 5
Technical Catalogue - 6

TOTEM - Vertical type G Totem with two uprights and convex panels. This is the best solution for totems where a small section of the uprights can be seen. Base: *The height is referring to the upright size (raised over the base). A personalized height is available on request. TOP CAP panel made of Dibond 3 mm th. UPRIGHT with “U” shaped closure CLOSURE aluminium profile powder coated ash grey 007 natural anodized UPRIGHTS in aluminium powder coated ash grey 007 natural anodized UPRIGHT with “FLAT” closure GRAPHICS & LETTERING - vinyl lettering - polychromatic digital print on vinyl CLOSURE...

Open the catalog to page 6
Technical Catalogue - 7

TOTEM - flag system type H and L Flag system Totem with convex panels. This is the best solution when a narrow structure with a high aesthetical impact Totem is needed. Small flag Totem with convex panels. This is the best solution when a narrow structure with a high aesthetical impact Totem is needed. Back-lighting not available. > EXTERNAL LIGHTING SYSTEM Totem can be lit through appropriate lamps installed on the top end or on the ground. The lighting system is available for one or more sides. FRONT PROFILE in aluminium natural anodized or powder coated ash grey 007 FRONT PROFILE in...

Open the catalog to page 7
Technical Catalogue - 8

TOTEM - Vertical type M and S Vertical totem with flat panels. This is the best solution for outdoor totem with small portion of the upright exposed. Vertical totem with flat panels. This is the best solution for outdoor totem with small portion of the upright exposed. It has moreover the possibility to divide panels in different interchangeable modules and/or portions with graphic on paper. UPRIGHTS in aluminium powder coated anodized UPRIGHTS in aluminium powder coated anodized PANELS (separable in a few modules of big size) in silver or white Dibond In this case it’s not possible to have...

Open the catalog to page 8
Technical Catalogue - 9

TOTEM - indoor type P Issue 11-01 Monolith structures displaying a space’s identity or to direct people: sturdy and elegant for indoor uses Version with two uprights and convex panels. This is the best solution for small sized indoor Totem. TOP CAP panel made of Dibond 3 mm th. UPRIGHT in aluminium powder coated silver RAL 9006 ash grey 007 PANELS - in aluminium 12/10 th. powder coated white RAL 9016 silver RAL 9006 ash grey 007 black 085 natural anodized - satinized stainless steel 10/10 In the case of a combination of panels made up of different materials or colours, the panelling is...

Open the catalog to page 9
Technical Catalogue - 10

TOTEM - Horizontal Version with two uprights and flat or convex panels. 148 92 You should specify wheter a flat or convex panel is needed GRAPHIC & LETTERING - vinyl lettering - polychromatic digital print or vinyl - graphics with laser-cut and back-lighted sheet - lighted or not lighted box letters (for totem with flat panels only) TOP CAP panel made of Dibond 3 mm th. UPRIGHT in aluminium powder coated silver RAL 9006 ash grey 007 SHEET BEARING in aluminium powder coated silver RAL 9006 ash grey 007 PANELS - aluminium 20/10 th. or 30/10 powder coated white RAL 9016 silver RAL 9006 ash...

Open the catalog to page 10
Technical Catalogue - 11

Modular plates structure to give directional information and identifying places: solid and classic for external use. L: 1050 - 1300 - 1600 Other lengths on request (max 2100 mm) 1050 - 1200 - 1300 Other lengths on request (max 2100 mm) 2100 1800 1500 1200 1050 Other heights on request (max 2500 mm) See picture “POSTS” (page 12) END CAP aluminium powder coated silver RAL 9006 ash grey 007 PE4.140 black 085 natural anodized PE4.160 LIGHTING SYSTEM PROFILE aluminium powder coated silver RAL 9006 ash grey 007 PE4.140 black 085 natural anodized PE4.160 SUPPORT FOR METAL SHEET aluminium powder...

Open the catalog to page 11
Technical Catalogue - 12

LIGHTING SYSTEM PROFILE -b- Small sized neon tube only: Installation of the big size neon tube -c(a) or the small size neon tube (b, c, d): -a-d- Access to the neon tube: -1- Access to the lamp holder: POSTS Plates are fixed: with PAWL with PAWL CAP black nylon PE4.40/2 couple of posts 40 x 40 mm complete with SCREW BOLT POST aluminium powder coated silver RAL 9006 ash grey 007 black 085 BASE Ø 100 - to be fixed zinced steel PE4.70/2 couple of posts 70 x 70 mm complete PE4.70/1 single post 70 x 70 mm complete PE4.80/2 couple of posts 80 x 80 mm complete PE4.80/1 single post 80 x 80 mm...

Open the catalog to page 12

All SEBERG catalogs and technical brochures

  1. Depliant 2011

    28 Pages

Archived catalogs