Book fotografico
Book fotografico
The document outlines various types of panels and display systems primarily made from extruded aluminium and methacrylate. These include interchangeable modular plates, convex and flat plates with both permanent and interchangeable graphics. The panels feature plastic end caps and frames, with some incorporating magnetic backgrounds or lighting systems.
Procedures:
Mounting methods for the panels and display systems include plastic hangers, aluminium clamps, and cylindrical clamps. Some systems are designed to be spaced from the wall, while others are mounted on steel or aluminium posts or bases.
Standards and Norms:
The panels are printed with symbols that adhere to current safety signage regulations. The document stresses the use of high-intensity luminescent films and pre-powder coated aluminium sheets for compliance.
Recommendations:
It is recommended to use interchangeable graphics on paper with transparent plastic front protection for flexibility. Methacrylate is highlighted for its durability and aesthetic appeal.
Key Features:
- Interchangeable modular plates and graphics.
- Use of extruded aluminium for frames and supports.
- Compliance with safety and regulatory standards.
- Options for permanent and interchangeable graphics.
- Various mounting options including wall-mounted, post-mounted, and free-standing systems.
Display Systems:
The document details several display systems, including outdoor and indoor showcases, brochure holders, and multi-function bars, designed to accommodate various formats and equipped with features like magnetic backgrounds, lighting, and adjustable bases.
The document describes display and holding accessories made from extruded aluminium and transparent plastic. Key products include an accessories holding bar, poster holding bar, and a belt-tightening small-post.
Accessories Holding Bar:
This bar, made of extruded aluminium with transparent plastic end caps, supports hanging transparent methacrylate accessories and can hold display panels for A4 and A5 paper formats, both vertically and horizontally. It includes shelves, horizontal tubs, penholders, and brochure holders for A4, A5, and 1/3 A4 formats, with a transparent internal partition for dividing the brochure holder into two parts for 1/3 A4 format.
Poster Holding Bar:
Constructed from extruded aluminium with lateral end caps and a front closing profile of transparent plastic, this bar allows for quick removal of displayed paper by lifting the sheet's end.
Belt-Tightening Small-Post:
Made from chromium-plated or satinized steel, this structure includes a 2.30-meter extensible belt with a slow-paced receding system, safety blocking, and a triple clasping system, available in Classic and Sport versions.
Contact Information:
Contact details for Seberg S.r.l. are provided for locations in Curno, Bagnacavallo, and Borgo San Donato, Italy.
Additional Information:
The document is © Seberg S.r.l., 2008.
Catalog excerpts
visual communication
Open the catalog to page 1
INDICE INDICE Risolvere qualsiasi problema legato alla comunicazione visiva. E' questo l'obiettivo di Seberg, un'azienda che grazie alla lunga esperienza maturata nel settore, è in grado di elaborare e proporre le soluzioni più adatte a soddisfare le esigenze del cliente, nel pieno rispetto delle realtà architettoniche esistenti. Questo dopo accurati sopraluoghi, un approfondito studio preliminare e grazie alla disponibilità di diverse linee di prodotti, sviluppate seguendo criteri di razionalità, versatilità e soprattutto qualità. Sempre con un occhio di riguardo alla cura dei dettagli. operativa...
Open the catalog to page 2
Totem verticale tipo A Totem verticale tipo B Totem verticale tipo C Totem verticale tipo D Totem verticale tipo E Totem verticale tipo G Totem a bandiera tipo H Totem a bandiera tipo L Totem Segno Light Totem per interni tipo P Totem orizzontale Type A vertical totem 8-9 Type B vertical totem 10-11 Type C vertical totem 12-13 Type D vertical totem 14-15 Type E vertical totem 15 Type G vertical totem 16-19 Type H flag system totem 22 Type L flag system totem 23 Segno Light totem 26-27 Type P indoor totem 48 Bacheche scorrevoli Outdoor showcases Indoor showcases Click showcases Sliding showcases...
Open the catalog to page 3
Totem and structures for outdoor use TOTEM e STRUTTURESTRUTTURE PER ESTERNO TOTEM e PER ESTERNO
Open the catalog to page 4
TOTEM tipo A TOTEM tipo A TOTEM tipo A Totem a due montanti con basamento piano in acciaio zincato o con basamento rialzato in acciaio verniciato, montanti laterali in alluminio estruso e pannellatura in alluminio. TOTEM type A Totem with two uprights and flat base made of zinced steel or with raised base made of powder coated steel, extruded aluminium side uprights and aluminium panels.
Open the catalog to page 5
TOTEM tipo B Totem a due montanti con basamento piano in acciaio zincato, montanti laterali in alluminio estruso e pannellatura in alluminio. Completo di impianto d’illuminazione superiore. TOTEM type B Totem with two uprights and flat base made of zinced steel, extruded aluminium side uprights and aluminium panels. With a lighting system on the top. TOTEM tipo B TOTEM tipo B
Open the catalog to page 6
TOTEM tipo C Totem a sezione rettangolare e montanti separati, con basamento piano in acciaio zincato, montanti laterali in alluminio estruso. I Pannellatura in metacrilato. Completo di impianto d’illuminazione interno alla struttura. Pannellatura in alluminio nella quale sono inseriti dei display a led. TOTEM type C Totem with rectangular section and separated uprights, on a flat base made of zinced steel, extruded aluminium side uprights. I Methacrylate panels. A back-lighting system is incorporated inside the structure. Between the aluminium panels led displays are incorporated. TOTEM tipo...
Open the catalog to page 7
TOTEM tipo D TOTEM tipo D Totem a sezione triangolare con basamento piano in acciaio zincato montanti laterali in alluminio estruso e pannellatura in alluminio. III-IV TOTEM tipo E Totem a sezione quadrata con basamento piano o rialzato in acciaio, montanti laterali in alluminio estruso e pannellatura in alluminio. TOTEM type D Totem with triangular section and flat base made of zinced steel, extruded aluminium side uprights and aluminium panels. TOTEM type E Totem with square section and flat base or with raised base made of steel, extruded aluminium side uprights and aluminium panels. TOTEM...
Open the catalog to page 8
TOTEM tipo G TOTEM tipo G TOTEM tipo G Totem a due montanti con basamento piano in acciaio zincato o con basamento rialzato in acciaio verniciato, montanti laterali in alluminio estruso e pannellatura in alluminio. TOTEM type G Totem with two uprights and flat base made of zinced steel or with raised base made of powder coated steel, extruded aluminium side uprights and aluminium panels.
Open the catalog to page 9
TOTEM tipo G Totem a due montanti in alluminio estruso e pannellatura in alluminio. I II Con pannellatura piana. Con pannellatura convessa. Accessoriato con logo e lettere scatolate retroilluminate. Con basamento piano in acciaio zincato. Con basamento autostabile in cemento. TOTEM type G Totem with two extruded aluminium side uprights and aluminium panels. I II With flat panels. With convex panels. Back-lit box plated characters and logo are available as addictional features. Flat base made of zinced steel. On a self-sustaining base made of cement.
Open the catalog to page 10
COMBINATO TOTEM G - DRIVE Totem a due montanti con basamento piano in acciaio zincato e pannellatura in alluminio. Integrato con piastra modulare in alluminio. I-II Struttura con montante laterale in alluminio estruso. Struttura con doppio totem. Completo di impianto d’illuminazione superiore. COMBINED Totem type G - DRIVE Totem with two uprights and flat base made of zinced steel and aluminium panels. Combined with modular plates made of aluminium. I-II Structure with extruded aluminium side upright. Structure with double totem and a lighting system on the top.
Open the catalog to page 11
TOTEM tipo H Totem a bandiera con basamento piano in acciaio zincato, montanti laterali in alluminio estruso, pannellatura e terminali in alluminio. TOTEM tipo L TOTEM tipo L TOTEM tipo L Totem a bandiera con profili laterali in alluminio estruso, pannellatura e terminali in alluminio. Montante in alluminio estruso e base in acciaio zincato. TOTEM type H Totem with flag system and flat base made of zinced steel, extruded aluminium side uprights, panels and end caps made of aluminium. TOTEM type L Flag totem with extruded aluminium profiles, aluminium panels and end caps. Extruded aluminium upright...
Open the catalog to page 12
REALIZZAZIONE SPECIALE Totem a sezione triangolare con telaio interno e base in acciaio zincato. Pannellature frontali realizzate con pannelli modulari in alluminio. BANNER Bandiera in poliestere posizionata su asta in alluminio. Possibilità di alzare e abbassare la bandiera agendo su dei cavi. SPECIAL CONSTRUCTION Totem with triangular section, inside structure and raised base made of zinced steel. Frontal panels made of aluminium modular panels. BANNER Polyester flag on an aluminium straff. Possibility to raise and lower the flag using cables.
Open the catalog to page 13All SEBERG catalogs and technical brochures
Technical Catalogue 201486 Pages
Technical Catalogue52 Pages
EXPO - Display Stands14 Pages
Depliant 201128 Pages
