Catalogs >
SE Controls >
TGCA 24 ED Locking Catch

TGCA 24 ED Locking Catch
2Pages

Catalog excerpts

reating a Healthier and Safer Environment CONTROLS secontrols.com TGCA 24 ED Locking Catch U +-» «S U O Applications Features: The locking motor is a motorized locking device used on inward opening top-, bottom- and side-hung window, serving as an additional lock via the fittings in combination with EasyDrive chain motors on the same window. especially for the combination with EasyDrive chain motors Օ optionally up to max. 500 N or max. 1000 N push force integrated power cut off and EasyDrive electronic Օ installation on the casement or concealed in the profile actuator can be inserted on the left or right as required Օ the locking direction can be set via a switch on the integrated board actuation of drive rod fittings Օ automatic load-dependent switch-off when end position is reached housing made from corrosion restistant, drawn aluminium Version 2.1 Tel: +44 (0)1543 44 30 60 www.secontrols.com Fax: +44 (0)1543 44 30 70

Open the catalog to page 1

TGCA 24 ED ocking Catc The AutoCAD drawing for this product can be found at www.secontrols.com echnical Data Connections ACTUATOR TYPE Locking Catch VOLTAGE (all +/-6%) 24v DC DIMENSIONS As Above AMIBIENT TEMPERATURE -5°C - 60°C STANDARD COLOUR Aluminum / White FLEX 4 core AMP DRAW CURRENT (no load) 0.85amp THRUST FORCE 500N / 1000N STROKE 18mm OPERATING TIME 500N - max.5 sec (dependent on load 1000N - max. 7 sec. (dependent on load These catches require control from a compatible low voltage unit such as OS2. Recommended Control: Contact an SE Controls sales representative PRODUCT OPERATING...

Open the catalog to page 2

TGCA 24 ED Locking Catch 2Pages

Catalog excerpts

All SE Controls catalogs and technical brochures

TGCA 24 ED Locking Catch
2Pages