Compact, powerful and efficient LED lighting solution GL2 COMPACT offers a unique combination of features in a slender housing for lighting the entrance, threshold and interior zones of a tunnel. Available in five sizes and with various lumen packages, GL2 COMPACT offers a high resistance to water, dust ingress and impacts. The photometry of GL2 COMPACT can be either symmetrical or asymmetrical to adapt to the tunnel lay-out. This lighting solution offers an uniform lighting and superior visibility in critical areas such as the entrance and exit zones of a tunnel. GL2 COMPACT offers several mounting possibilities. For example, it can be fixed directly onto a cable rack. The photometry can be adjusted on-site thanks to a tiltable bracket. GL2 COMPACT guarantees long lasting performance with minimum maintenance. TUNNELS & INDUSTRIAL HALLS UNDERPASSES & WAREHOUSES

GL2 COMPACT | SUMMARY Concept The GL2 COMPACT range combines the energy efficiency of LED technology with photometric versatility for a minimum total cost of ownership. The design of the LensoFlex® photometric engine offers maximum versatility for lighting underpasses, town and motorway tunnels. Available with symmetrical or asymmetrical light distributions, GL2 COMPACT adapts perfectly to the requirements of the space to be lit. It is composed of an extruded aluminium body and a tempered glass protector. GL2 COMPACT is available in five sizes to fit all requirements. For further savings, GL2...

LensoFlex®4 LensoFlex®4 maximises the heritage of the LensoFlex® concept with a very compact yet powerful photometric engine based upon the addition principle of photometric distribution. The number of LEDs in combination with the driving current determines the intensity level of the light distribution. With optimised light distributions and very high efficiency, this fourth generation enables the products to be downsized to meet application requirements with an optimised solution in terms of investment. LensoFlex®4 optics can feature backlight control to prevent intrusive lighting, or a glare...

GL2 COMPACT | CONTROL SYSTEMS FOR TUNNELS Advanced Tunnel System 4 (ATS 4) The ATS 4 (Advanced Tunnel System 4) is a powerful tunnel lighting control system for precise remote dimming and switching of each individual connected luminaire, based on various tunnel parameter inputs (emergency exits, smoke extraction system, traffic cameras, etc.). The ATS 4 permanently communicates with the Lumgates, an RS422 closed-loop device connected to the luminaire drivers, to control the light intensity and provide command/reporting features. Sensors and cameras The ATS 4 can be connected to various sensors...

GL2 COMPACT | CONTROL SYSTEMS FOR TUNNELS Lumgate V4 The Lumgate is a luminaire control unit that acts as an interface between the lighting management system and the tunnel luminaires or driver boxes. Connected to the luminaire drivers, it switches the drivers on/off, controls the light intensity and provides command/reporting features. It is suitable for installation in driver boxes or directly in the luminaire. It communicates with the driver via 0-10V or DALI command. This brand new interface includes advanced Inrush Current Limitation Features and a 24 hour fail-safe repeat mode. Copyright...

GL2 COMPACT | ATS 4 CONTROL SYSTEM Jointly developed by Schréder and Phoenix Contact, the Advanced Tunnel System 4 (ATS 4) has been designed to control every lighting point or clusters of luminaires to perfectly adapt the lighting level according to conditions in the tunnel, to monitor the power consumption and to report the burning hours or any failure to facilitate maintenance. The system includes a selfcommissioning feature and enables scenarios to be adapted remotely at any moment. PRECISE AND CONTINUOUS DIMMING ATS 4 provides 25 different dimming levels to precisely adapt the lighting to...

Copyright © Schreder SA - November 2024. ALL rights reserved. Specifications are of an indicative nature and subject to change without notice.

GENERAL INFORMATION_ installation height LM 79-08 (all measurements in ISO17025 accredited laboratory) ELECTRICAL INFORMATION_ Electrical class Class 1 US, Class I EU, Class II EU Control protocol(s) 1-10V, DALI Control options Lumgate, Bi-power, Remote Associated control Advanced Tunnel System 4 (ATS 4) system(s) Advanced Tunnel System 4 DALI (ATS 4 Housing Aluminium Optic PMMA Protector Tempered glass Housing finish Standard polyester powder coating (C2- Optional "seaside" polyester powder coating (C4 according to the ISO 92232012 standard) Optional "seafront" polyester powder coating with...

GL2 COMPACT | CHARACTERISTICS DIMENSIONS AND MOUNTING AxBxC (mm | inch) COMPACT COMPACT COMPACT COMPACT COMPACT Mounting possibilities Mounting on cable tray Suspended mounting Surface mounting Direct mounting on ceiling · For more information about mounting possibilities, please consult the installation sheet. · Size and weight may be different according to the configuration. Please consult us for more information. Copyright © Schréder SA - November 2024. All rights reserved. Specifications are of an indicative nature and subject to change without notice.

Tolerance on LED flux is ± 7% and on total luminaire power ± 5 % Tolerance on LED flux is ± 7% and on total luminaire power ± 5 % Tolerance on LED flux is ± 7% and on total luminaire power ± 5 % Copyright © Schreder SA - November 2024. All rights reserved. Specifications are of an indicative nature and subject to change without notice.

Luminaire output flux (lm) Neutral White Tolerance on LED flux is ± 7% and on total luminaire power ± 5 % Tolerance on LED flux is ± 7% and on total luminaire power ± 5 % Copyright © Schreder SA - November 2024. All rights reserved. Specifications are of an indicative nature and subject to change without notice.