Butt Cut
1 /19Pages

Butt Cut

Butt Cut
1 /19Pages

Catalog excerpts

Butt Cut-1

Black Shields (Fumed Larch) Triangle (Fumed European Oak) Butt Cut Leheryia (Black Walnut) fascinating end-grain veneer in sheets Wood Pile (Swiss Pearwood) Half Moon (Fumed Larch) Wood Stone (Fumed Larch) Moon Heart (Hearted Beech) Beech Flower (Hearted Beech) Satin Stone (Satin Walnut) Satin Sun (Satin Walnut) Smoked Rough Oak (Fumed European Oak) Smoked Woodpile (Swiss Pearwood) White Woodpile (Swiss Pearwood) More information about our veneer awaits you. Just click on the photos.

 Open the catalog to page 1
Butt Cut-2

SCHORN & GROHFurniere -Veneers Butt Cut: fascinating end-grain veneer in sheets Butt Cut is razor-thin end-grain veneer cut from fine wood. Its fascinating appearance is created by joining together many small pieces of veneer. End-grain wood has a special rustic and natural character. It is obtained by cross-cutting the tree trunk rather than cutting it length-wise. When this technique is used, the annual rings form highly decorative circular patterns. Butt Cut offers many advantages over solid end-grain wood. The thinness of the veneer relieves the stress in the cross-cut wood while the fleece...

 Open the catalog to page 2
Butt Cut-3

Black Shields (Fumed Larch) Standard size: 2,600 mm x 1,250 mm Thickness: +/- 0.7 mm Scale size: The veneers shown are only examples. Colors, grains and patterns may vary depends on the logs used as all are individually handmade. Detail Contact: [email protected] · www.sg-veneers.com Black Shields / Panel – full size

 Open the catalog to page 3
Butt Cut-4

Standard size: 2,600 mm x 1,250 mm Thickness: +/- 0.7 mm Scale size: The veneers shown are only examples. Colors, grains and patterns may vary depends on the logs used as all are individually handmade. Detail Contact: [email protected] · www.sg-veneers.com New Type / Panel – full siz

 Open the catalog to page 4
Butt Cut-5

Standard size: 2,600 mm x 1,250 mm Thickness: +/- 0.7 mm Scale size: The veneers shown are only examples. Colors, grains and patterns may vary depends on the logs used as all are individually handmade. Detail Contact: [email protected] · www.sg-veneers.com Triangle / Panel – full size

 Open the catalog to page 5
Butt Cut-6

Leheryia (Black Walnut) Standard size: 2,600 mm x 1,250 mm Thickness: +/- 0.7 mm Scale size: The veneers shown are only examples. Colors, grains and patterns may vary depends on the logs used as all are individually handmade. Detail Contact: [email protected] · www.sg-veneers.com Leheryia / Panel – full size

 Open the catalog to page 6
Butt Cut-7

Wood Pile (Swiss Pearwood) Standard size: 2,600 mm x 1,250 mm Thickness: +/- 0.7 mm Scale size: The veneers shown are only examples. Colors, grains and patterns may vary depends on the logs used as all are individually handmade. Detail Contact: [email protected] · www.sg-veneers.com Wood Pile / Panel – full si

 Open the catalog to page 7
Butt Cut-8

Half Moon (Fumed Larch) Standard size: 2,600 mm x 1,250 mm Thickness: +/- 0.7 mm Scale size: The veneers shown are only examples. Colors, grains and patterns may vary depends on the logs used as all are individually handmade. Detail Contact: [email protected] · www.sg-veneers.com Half Moon / Panel – full size

 Open the catalog to page 8
Butt Cut-9

Wood Stone (Fumed Larch) Standard size: 2,600 mm x 1,250 mm Thickness: +/- 0.7 mm Scale size: The veneers shown are only examples. Colors, grains and patterns may vary depends on the logs used as all are individually handmade. Detail Contact: [email protected] · www.sg-veneers.com Wood Stone / Panel – full size

 Open the catalog to page 9
Butt Cut-10

Standard size: 2,600 mm x 1,250 mm Thickness: +/- 0.7 mm Scale size: The veneers shown are only examples. Colors, grains and patterns may vary depends on the logs used as all are individually handmade. Detail Contact: [email protected] · www.sg-veneers.com Natural Oak / Panel – full size

 Open the catalog to page 10
Butt Cut-11

SCHORN & GROH Furniere -Veneers (Hearted Beech) Standard size: 2,600 mm x 1,250 mm Thickness: +/- 0.7 mm Scale size: abt. 18 x 20 x 28 cm The veneers shown are only examples. Colors, grains and patterns may vary depends on the logs used as all are individually handmade. Contact: [email protected] • www.sg-veneers.com

 Open the catalog to page 11
Butt Cut-12

Beech Flower (Hearted Beech) Standard size: 2,600 mm x 1,250 mm Thickness: +/- 0.7 mm Scale size: The veneers shown are only examples. Colors, grains and patterns may vary depends on the logs used as all are individually handmade. Detail Contact: [email protected] · www.sg-veneers.com Beech Flower / Panel – full size

 Open the catalog to page 12
Butt Cut-13

Satin Stone (Satin Walnut) Standard size: 2,600 mm x 1,250 mm Thickness: +/- 0.7 mm Scale size: The veneers shown are only examples. Colors, grains and patterns may vary depends on the logs used as all are individually handmade. Detail Contact: [email protected] · www.sg-veneers.com Satin Stone / Panel – full size

 Open the catalog to page 13
Butt Cut-14

Satin Sun (Satin Walnut) Standard size: 2,600 mm x 1,250 mm Thickness: +/- 0.7 mm Scale size: The veneers shown are only examples. Colors, grains and patterns may vary depends on the logs used as all are individually handmade. Detail Contact: [email protected] · www.sg-veneers.com Satin Sun / Panel – full size

 Open the catalog to page 14
Butt Cut-15

Standard size: 2,600 mm x 1,250 mm Thickness: +/- 0.7 mm Scale size: The veneers shown are only examples. Colors, grains and patterns may vary depends on the logs used as all are individually handmade. Detail Contact: [email protected] · www.sg-veneers.com Oak Circle / Panel – full size

 Open the catalog to page 15
Butt Cut-16

Smoked Rough Oak (Fumed European Oak) Standard size: 2,600 mm x 1,250 mm Thickness: +/- 0.7 mm Scale size: The veneers shown are only examples. Colors, grains and patterns may vary depends on the logs used as all are individually handmade. Detail Contact: [email protected] · www.sg-veneers.com Smoked Rough Oak / Panel – full size

 Open the catalog to page 16
Butt Cut-17

Smoked Woodpile (Swiss Pearwood) Standard size: 2,600 mm x 1,250 mm Thickness: +/- 0.7 mm Scale size: The veneers shown are only examples. Colors, grains and patterns may vary depends on the logs used as all are individually handmade. Detail Contact: [email protected] · www.sg-veneers.com Smoked Woodpile / Panel – full si

 Open the catalog to page 17
Butt Cut-18

White Woodpile (Swiss Pearwood) Standard size: 2,600 mm x 1,250 mm Thickness: +/- 0.7 mm Scale size: The veneers shown are only examples. Colors, grains and patterns may vary depends on the logs used as all are individually handmade. Detail Contact: [email protected] · www.sg-veneers.com White Woodpile / Panel – full si

 Open the catalog to page 18

All SCHORN&GROH catalogs and technical brochures

  1. SHINING GREY

    5  Pages

  2. Our products

    17  Pages

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.