We get to the point with glass ideas Glazing systems as point-supported constructions offer the maximum amount of transparency and allow the metal constructions to fade away into the background. We supervise projects starting from the initial stages such as construction planning through to statics and then right up to the supply and assembly stages. We are able to implement ideas and visions thanks to the GEWE-point® System as well as our competency in glass engineering, used – even in coloured quality or clear glass (low iron content), as well as coated glass. The glass thickness varies depending on the static requirement. With regards to float glass and clear glass, the range varies from 8 mm up to 19 mm. When dealing with coloured and coated glass, the maximum amount is 10 mm. All float glass based glass can also be designed with the most various of screen printing designs – full area or part area, one colour or multiple colours. As a matter of principle, we place the highest quality standards upon all materials that are used. Therefore, all of the point retainer models belonging to the GEWE-point® System possess a German “General Technical Approval” (AbZ) for the most various of applications. To the point: German “General Technical Approval” for all point retainer models on offer Use of float glass based safety glass Individual presentation via screen printing Extension via spider system entitled “GEWE-point® spider” Choice of retainer models in elastic mounting or fixed mounting The GEWE-point® System glazing is exclusively comprised of thermally toughened safety glass types: GEWE-dur®, GEWE-tvg® or GEWE-safe®. The most various of float glass products may also be

The elastically mounted point retainers have been specially developed in order to enable tension-free forming of the glazing as well as to accordingly discharge the strain into the sub-construction. This is enabled via an elastomer bearing in the centre of the retainer that additionally offers the following advantages: Improved impact load thanks to the spring back effect of the elastomers In the event of an impact load, the axial absorption is possible in various directions The retainer is flexible The mounting enables an even distribution of energy Quick and clean assembly thanks to optimally...