RL series load break switch/sectionaliser with ADVC controller
28Pages

Medium Voltage Distribution U-Series three-phase recloser/ W-Series single-phase recloser with ADVC controller

U-Series recloser specifications 5 W-Series recloser specifications 7 ADVC controller series 8 ADVC block diagram 9 flexVUE Operator Interface 11 General protection features 14 Advanced protection features 16 U-Series recloser - Pole mounting details 18 Required details for order 19 W-Series recloser - Pole mounting details 20 Required details for order 21 W-Series SWER recloser (W27) Required details for order ADVC controller 22

Smart grid ready With the increasing push for advanced monitoring, reduction of outages and the need to facilitate two-way communications between supply and the distribution network, the U-Series Automatic Circuit Recloser is ready to be integrated into your Smart Grid solution. Loop automation Restoring supply to your customers in the shortest possible time is the focus of recloser solutions’ loop automation scheme. The loop automation scheme recongures protection settings, sectionalises faults, minimises affected areas, and restores network supply without the need for communications or...

The U-Series & W-Series solid dielectric Automatic Circuit Recloser (ACR) represents Schneider Electric’s commitment to improved products and ongoing product development. Providing the features of a traditional recloser, plus the benets of up-to-date design optimised for automation, remote control and monitoring, now or in the future. The U-Series & W-Series development was driven by customer demand for improved return on capital investment in the distribution network. After careful evaluation of customers’ needs, the U-Series was developed to achieve optimum performance and reliability,...

The U-Series ACR uses vacuum interrupters, contained in epoxy bushings, eliminating the need for insulants like oil and gas. The U-Series circuit breaker is controlled and monitored by either the COMPACT or ULTRA ADVC Controller (ADVC). The mechanism is enclosed in a 316 stainless steel tank with a stainless steel lid. Enclosed in a 304 (COMPACT) or 316 (ULTRA) grade stainless steel enclosure, the ADVC provides an electronic controller with Operator Interface (O.I.) that monitors the circuit breaker and provides protection, measurement, control and communication functions. Connected via a...

U-Series recloser specifications Ratings Rated maximum voltage Rated continuous current Fault make capacity (RMS) Fault make capacity (Peak) Power operating time (Close / Open) Mechanical operations Rated full load operations Short time current Breaking capacity Mainly active (0.7 pf) Fault break capacity Cable charging Transformer magnetising Across interrupter Across interrupter Circuit breaker with pole mount bracket Control cubicle with control cable Gross weight of crate External VT (N-Series only) Lightning impulse withstand level Power frequency withstand voltage Service conditions...

The W-Series ACR uses a vacuum interrupter, contained in an epoxy bushing, eliminating the need for insulants like oil and gas. The W-Series circuit breaker is controlled and monitored by either the COMPACT or ULTRA ADVC Controller (ADVC). The mechanism is enclosed in a 316 stainless steel tank with a stainless steel lid. Enclosed in a 304 (COMPACT) or 316 (ULTRA) grade stainless steel enclosure, the ADVC provides an electronic controller with Operator Interface (O.I.) that monitors the circuit breaker and provides protection, measurement, control and communication functions. Connected via...

W-Series recloser specifications W-Series Ratings Rated maximum voltage Rated nominal voltage (Phase to ground) Rated continuous current Fault make capacity (RMS) Fault make capacity (Peak) Power operating time (Close / Open) Mechanical operations Rated full load operations Short time current Breaking capacity Mainly active (0.7 pf) Fault break capacity Cable charging Line charging Transformer magnetising Across interrupter Across interrupter Circuit breaker with pole mount bracket Control cubicle with control cable Gross weight of crate External VT (N-Series only) Lightning impulse...

ADVC controller series Advanced protection, data logging & communications capabilities are made possible by the technology housed in the ADVC controller. With a cubicle designed to minimise temperature rise from solar heating, the 304 (COMPACT) or 316 (ULTRA) grade stainless steel enclosure is used to mount the Control And Protection Enclosure (CAPE), Power Supply Unit (PSU), customer accessories and Operator Interface. It has been designed especially for outdoor pole-mounted operation and is typically mounted low on the pole for ease of access by operation personnel. The ADVC controller...

ADVC block diagram Switchgear Operating mechanism New and innovative features have been made possible by the intimate way the pole-mounted circuit breaker and control cubicle work together. The block diagram on this page shows how the two items are interfaced. ADVC controller Control and protection enclosure Accessory mounting tray(s) RS232 V23 Operator interface Switchgear power Communication interface Special extended range current transformers provide a range from 1 A to 12,500 A for measurement and protection. Embedded voltage screens accurately image the primary voltage value and phase...

ADVC features Each recloser is provided with an Operator Interface. From here a user can access and program the many measurement and protection features available. Two different Operator Interfaces are available, these are: b setVUE Operator Interface v Based on the eld-proven operator panels in the previous controllers, this menudriven interface with large LCD display offers a familiar look and feel. setVUE Operator Interface b flexVUE Operator Interface v 20 status lamps provide a quick snapshot of the protection and controller status. v 12 quick action keys are available to execute...

flexVUE Operator Interface Customising the operator interface to suit your unique applications has never been easier. The flexVUE Operator Interface uses Light Emitting Diodes (Lamps) and an LCD display to communicate the system status to a local operator. Operator actions that are performed on a regular basis can be mapped to 12 dedicated buttons on the interface. Each of these buttons also have a lamp to indicate the ON/OFF state of each action. Together with the 20 status lamps the panel provides no less than 32 three-colour LEDs that display the state of the controller and overhead...