Schlüter® -BARA-RAKE/-RAKEG
4Pages

{{requestButtons}}

Catalog excerpts

Schlüter® -BARA-RAKE/-RAKEG - 1

NNOVATIVE PROFILES Schl üter®- BAR A-RAKE/- RAKEG Finishing profile for attachment on sloped screeds Product data sheet Schl üter®- BARA- RAKE/- RAKE G is a fin- ishing profile for exposed edges of covering assemblies on balconies and terraces with existing sloped screeds. Schluter®-BARA- RAKE Is especially suited for assemblies with the bonded drainage mat Schlüter®- DITRA-DRAIN. The perforated outer edges give the outer perimeter of tiled areas a neat Furthermore, the profile covers the exposed edges of the bonded drainage mat Schlüter®- DITRA-DRAIN, which is installed under the covering. The cross section of the profile openings is sufficiently large to guarantee The trapezoid perforated anchoring leg of exposed edges with a dry set tile adhe- Schluter®-KERDI may be used as a bonded waterproofing assembly, but trowel applied chemical products for bonded waterproof- ing are equally suitable. Schluter®-BARA- RAKEG was designed for assemblies with the bonded uncoupling membrane Schluter®-DITRA 25. The closed outer edges give the outer perimeter of tiled areas a neat appearance. Schluter®-BARA- RAKE/-RAKEG creates a neat appearance and protects the exposed edges from weather Influences and corrosion. Schl üter®- BARA- RAKE/- RAKEG is made of colour coated aluminium. Material properties The coating on the aluminium profile Is colour stable, as well as UVand weather resistant. Visible surfaces should be protected against abrasion. In special cases, the suitability of verified based on the anticipated chemical

Open the catalog to page 1
Schlüter® -BARA-RAKE/-RAKEG - 2

1. Select SchIüter®-BARA-RAKE according 2.As a finishing profile, Schluter®-BARA- RAKE Is embedded Into the thin-bed mortar setting material with the trapezoid perforated anchoring leg aligned at the edge of the screed. Completely cover the anchoring leg with mortar. 3. Install Schlüter®-KERDI over the anchoring leg and cover the undercut profile of the protruding adhesive flange of Schlüter®- BARA-RAKE, using the sealing adhesive 4. If using a trowel applied sealing com- pound, align the trapezoid perforated exposed edge. The waterproofing mate- rial must cover the undercut profile of the...

Open the catalog to page 2
Schlüter® -BARA-RAKE/-RAKEG - 3

special maintenance or care. The powder coated surface of the aluminium profile is UV resistant and colour stable. Damaged visible surfaces can be restored with paint. Product Overview Colours: PG = pastel grey, GM = grey metallic Colours: PG = pastel grey GM = grey metallic Text template for tenders: Text template for tenders: _linear metres of Schlütere-BARA-RAKE, as an angled balcony finishing profile made of coated aluminium with protruding adhesive flange, perforated upright edge and Integrated drip lip, to be supplied and professionally Installed In the edge area over an existing...

Open the catalog to page 3
Schlüter® -BARA-RAKE/-RAKEG - 4

Schlüter-Systems KG · Schmölestraße 7 · D-58640 Iserlohn · Tel.: +49 2371 971-0 · Fax: +49 2371 971-111 · www.schlueter-systems.com Schlüter-Systems Ltd · Units 4–5 Bardon 22 · Beveridge Lane · COALVILLE · Leicestershire · LE67 1TE · Tel. +44 1530 813396 · Fax +44 1530 813376 www.schluter.co.uk · technical@schluter.co.uk · sales@schluter.co.uk Art.-Nr. 552 233 – 04/12 Issue – Reprints will invalidate this issue. 5.22 Sch lü ter ® -BAR A-R AK E /- RA KEG

Open the catalog to page 4

All Schluter-Systems catalogs and technical brochures