NNOVATIVE PROFILES EDGING PROFILE Schlüter®-BARA-RTP is an edging profile that accommodates the Schlüter®-BARIN gutter system. The profile is subsequently installed at the exposed edges of existing floor coverings on balconies and terraces. front of the exposed edges on balconies and terraces via bolts, 5 mm in diameter, that are placed at approximately 50 cm intervals. A T-shaped channel has been provided at for attaching the Schluter®-BARIN gutter using self-tapping screws. Slotted holes in the Schluter®-BARIN gutter system allow the Schluter®-BARA-RTP profile to be adjusted Schluter®-BARA-RTP is made of pre-treated (chromated), colour-coated aluminium. Material properties The coating of the aluminium profile Is colourfast, weather and UV-resistant. Vis- ible surfaces should be protected against In special cases, the suitability of Schlüter®- BARA-RTP must be verified based on the anticipated chemical, mechanical, and/or other stresses.

ing profile, drill holes, 8 mm in diameter, Into the front edge of the floor covering at approximately 50 cm Intervals. To align with the holes provided in the profile, against the front edge and used as a drilling template. 2. After inserting the anchors, the Schlüter®- BARA-RTP edging profile should be fastened with Schluter®-BARA-RTPS 540 special bolts. To ensure solid contact of Schluter®-BARA-RTP to the front edge of the covering assembly, it Is advisable to fill the rear ribs of the edging profile with dry-set mortar first. 3. Once Schluter®-BARA-RTP has been mounted, the Schluter®-BARIN...