NNOVATIVE PROFILES STAIR NOSING PROFILE NON SLIP STAIR NOSING PROFILES steel stair nosing profiles with a special non slip tread. The profiles are suitable for the safe and visually appealing design of stairs with tiled or natural stone coverings, but can also be used with screed or other coating materials. Schluter®-TREP-G with a special non slip tread (classification R11) made of a coloured mineral grain tape is particularly suitable for applications In areas with heavy foot traffic e.g. business premises or In public build- ings. Schluter®-TREP-GL with a special non slip tread (classification R10) made of profiled plastic Insert Is suitable for residen- tial settings or areas with low foot traffic. without anchoring legs. These profiles are adhered to existing steps, e.g. for subse- quent Installation over damaged edges, eliminating the need to replace the entire step. Schluter®-TREP-G /-GL protects the front edge of steps and adds a high degree of safety due to the special non slip design of the tread and the excellent visibility of the steps. The non slip treads are adhered to an Indentation In the support profile to ensure that the edges of the adhesive tape are reliably protected. The treads of Schlüter®- TREP-G/-GLcan be subsequently replaced In case of damage or wear and tear. Match- Schluter®-TREP-G Is made of stainless steel material no. 1.4301 (V2A), which Is produced In a roll forming process and fea- tures trapezoid perforations In the anchor- ing legs. The profiles feature an attached tape with a non slip tread, which In the case of Schluter®-TREP-G consists of an embedded mineral grain, and in the case of Schluter®-TREP-GL, of profiled plastic

Material properties and areas of The suitability of the selected profile type must be verified based on the antici- pated chemical, mechanical, and/or other Schluter®-TREP-G/-GL is particularly well suited for applications that Involve heavy mechanical stresses and depending on their type, require resistance to chemicals such as acidic or alkaline substances or detergents. The profiles are designed for Internal and external areas. However, please note that the transparent tread only has limited UV resistance and Is Intended for 1. Select Schlüter®-TREP-G / -GL accord- 2. Align the covering material...

cial maintenance or care. It is recommended to regularly remove dirt and other residue (for example with a scrubbing brush) to maintain the non-slip function of the treads, stainless steel surfaces exposed to the environment or aggressive substances should be cleaned periodically using a mild household cleaner. Regular cleaning maintains the neat appear- ance of stainless steel and reduces the risk of corrosion. All cleaning agents must be free of hydrochloric and hydrofluoric acid. Do not use abrasive cleaning agents on the sensitive surfaces. The stainless steel cleaning polish Schluter®-CLEAN-CP...

3.5 Sch lü ter ® -TREP-G Text template for tenders: Text template for tenders: _______units of Schlüter®-TREP-G, as a stair nosing profile consisting of stainless steel with a trapezoid perforated anchoring leg and adhered, non slip tread (Classification R11) with mineral grain coating, to be supplied and professionally installed as part of tile installation on stairs as an edge profile to be integrated into the tile covering, while observing the manufacturer’s instructions. _______units of Schlüter®-TREP-GK as a subsequently adhered stair nosing profile, consisting of stainless steel with an...