05/18 - 2 Construction subject to change. Version: 13.02.2020 No return possible!

Long throw nozzle WDA Model WDA-N-... WDA-F-... WDA-W-... WDA-D-... WDA-K-... WDA-R-... Description A horizontal supply air pattern is often required for large, high rooms such as theatres, concert halls, production halls, etc. Long throw nozzles type WDA are particularly suitable for this application. Their low noise level allows a high blow velocity, resulting in correspondingly long throw distances. The nozzles are also well suited to vertical throws. Please note, however, that nozzles which are designed for heating mode can cause draughts in cooling mode. This can be avoided if the nozzles...

Long throw nozzle WDAModels and dimensions WDA-W-... WDA-F-... WDA-D-... WDA-K-... WDA-R-... (not possible for NW 031-050 and NW 400) 1.) 3 x indentation for slotted shallow-raised countersunk-head tapping screw DIN ISO 7051 pitch 3.9 Available sizes WDA-N-... / WDA-W-... / WDA-F-... / WDA-D-... / WDA-K-... / WDA-R-... * Larger diameters are also available upon request! Construction subject to change.

Long throw nozzle WDA Dimensions of accessories Swivel head (-SK, NW 050 not possible) The adjustment of the nozzle can be done manually or electrically. WDA-F-. ..-SK-... / WDA-D-. ..-SK-... 1.) 3 x indentation for slotted shallow- raised counter sunk-head tapping screw DIN ISO 7051 pitch 3.9 (6 for NW400) Larger diame :ers are also available upon request! Construction subject to change.

Long throw nozzle WDA Swivel head (-SK, NW 400) The adjustment of the nozzle can be done manually or electrically. WDA-F-400-SK-... / WDA-D-400-SK-... WDA-W-400-SK-... 1.) 6x bore ø8 for mounting on site 05/18 - 6 Construction subject to change.

Long throw nozzle WDAElectric actuator (only available from NW 063) Mounted externally (standard) “AL” = Left-hand design (standard) 0V = nozzles on top Direction of rotation: "R" “AR” = Right-hand design 0V = nozzles on top Direction of rotation "L" For an externally fitted actuator, please make sure that the distance to the ceiling or wall is greater than 10 mm. Construction subject to change.

Long throw nozzle WDAMounted internally (-Al, at an extra charge, NW 400 not possible): 5 "O 1 o * Larger diameters are also available u pon request! For size 400, an actuator cannot be mounted internally! Construction subject to change.

Reduction piece (-RS) (only available for NW 063 - 200) without swivel head / with or without swirl disc WDA-W-...-RS-... with swivel head / with or without swirl disc WDA-W-...-SK-...-RS-... Construction subject to change. Damper (-DV) (only available for NW 400)

Long throw nozzle WDA Cover plate (-BR) (concealed mounting, only NW 063-200 available) Construction subject to change.

Long throw nozzle WDABall impact guard (-BS) WDA-D-.. .-BS-... / WDA-K-...-BS-... Number of fastening holes Construction subject to change.

Long throw nozzle WDA WDA-D-...-SK-. ..-BS-... / WDA-F-.. .-SK-...-BS-... Construction subject to change.

Long throw nozzle WDA WDA-K-...-SK-...-BS-... Construction subject to change.

Long throw nozzle WDA Technical data Pressure loss and noise level WDA-...-031-... / WDA-...-050-... 05/18 - 14 Construction subject to change. Version: 13.02.2020 No return possible!

Long throw nozzle WDAJet angle a NW Correction factor for swirl disc WDA 063 - 200 Construction subject to change.

Long throw nozzle WDA WDA-...-RS-..., with reduction piece Correction factor for swirl disc WDA-. ..-063-. ..-RS-... / WDA-. ..-200-. ..-RS-... Construction subject to change.

Long throw nozzle WDA WDA-...-400-... (without damper) 05/18 - 17 Construction subject to change. Version: 13.02.2020 No return possible!

Long throw nozzle WDAMaximum end velocity of jet WDA-...-031 - 050-... Construction subject to change.

Long throw nozzle WDA Maximum penetration WDA-...-031 - 050-... 05/18 - 19 Construction subject to change. Version: 13.02.2020 No return possible!

Long throw nozzle WDA Model for vertical nozzle mounting for cooling mode Correction factors of the expected average velocity in vertical installation of the nozzles Calculation of the average velocity, relative to the AT for vertically integrated nozzles.Example: WDA-...-200-... at 250 m3/h, mounting height = 9.5 m, AT = - 6 K: Head height = 9.5 m - 1.8 m = 7.7 m y (m) would be 7.7 m according to SCHAKO's design program; since the nozzle is mounted horizontally according to the design program, the y value for vertically integrated nozzles must be entered under x (m)! x = 7.7 m According to the...

Version: 13.02.2020 Construction subject to change. No return possible!

Long throw nozzle WDA Temperature ratios WDA-...-031 -050-... 05/18 - 22 Construction subject to change. Version: 13.02.2020 No return possible!

Long throw nozzle WDA Definitions Cooling mode Cooling mode example Assume: NW 100 Construction subject to change.

Long throw nozzle WDA Further data Horizontal throw (free jet) WDA-...-031 - 050-... 05/18 - 24 Construction subject to change. Version: 13.02.2020 No return possible!

Long throw nozzle WDA WDA -...-125 - 200-... 05/18 - 25 Construction subject to change. Version: 13.02.2020 No return possible!

Long throw nozzle WDA Connection diagrams of electric actuators Make Siemens E092 (GLB 331.2.E) Three-point control OPEN/CLOSED control Make Siemens E091 (standard GLB 163.2.E) Steady control Make Siemens E090 (GLB 131.2.E) Three-point control 05/18 - 26 Construction subject to change.

Long throw nozzle WDATechnical data of electric actuators Make Belimo E048 (NM230A-F) Rated voltage: Functional range: Power consumption - Operation: - Idle position: - Dimensioning: Torque (rated torque): Running time: Sound power level: Protection class: Degree of protection: EMC: Low voltage directive: Ambient temperature: AC 100 ... 240 V, 50 / 60 Hz AC 85 ... 265 V 2.5 W @ nominal torque 0.6 W 6 VA Min. 10 Nm at the rated voltage 150 s max. 35 dB (A) II protective insulation IP54 in all mounting positions CE according to 89 / 336 / EEC CE according to 73 / 23 / EEC -30 ... +50°C Rated voltage:...