Catalogs >
SCHAKO KG >
SVA-FS

SVA-FS
1 / 11Pages

Catalog excerpts

Technical Documentation "Installation, Mounting and Operating In- SVA-FS Fire Damper Disc Valve PERFORMANCE DATA • For automatic locking of fire lobbies USABILITY CERTIFICATE • General building supervisory approval (abZ) / general type approval (aBG) Z-41.3-312 • Classification K90 • Application For installation in fire-resistant solid walls and ceilings in connection with a connected ventilation duct. SPECIAL FEATURES • Fire prevention • Sheet steel design with epoxy resin powder coating (standard colour: RAL 9010 pure white; other RAL colours are possible) SCHAKO | Ferdinand Schad KG SteigstraGe 25-27 D-78600 Kolbingen

Open the catalog to page 1

Fire damper poppet valve SVA-FS Technical documentation Table of Contents Construction subject to change No return possible

Open the catalog to page 2

Fire damper poppet valve SVA-FS Technical documentation Description The fire damper poppet valve SVA-FS for supply and return air, with thermal trigger (72 °C) and adjustable valve plate for air volume regulation has, according to approval certificate Z-41.3-312 with one-sided connected ventilation ducts made of non-flammable building materials, the resistance class K 90 (resistant for 90 min.), in which the opening in the non-flammable ventilation ducts must be distanced from the damper housing by at least 1.5 times the internal ventilation duct diameter. Otherwise the fire damper poppet...

Open the catalog to page 3

Fire damper poppet valve SVA-FS Technical documentation Models and dimensions Available sizes DIMENSIONS SVA-FS Table 1: Available sizes SVA-FS INSTALLATION DETAILS The cavities between the shut-off device and the solid wall or ceiling to be protected must be completely filled with mortar of mortar class M2.5; M5; M10 or M15 according to DIN EN 998-2 (building components at least 100 mm thick), with concrete or with plaster mortar. Mounting situation for resistance class K 30 When connected to ventilation ducts made of flammable building materials. conFlammable ventilation duct Figure 1:...

Open the catalog to page 4

Fire damper poppet valve SVA-FS Technical documentation Technical data TECHNICAL DATA Pressure loss and noise level SVA-FS 150 SPECIFICATION TEXTS Fire damper poppet valve (shut-off device) for supply and return air, with thermal trigger (72 °C) and adjustable valve plate for air volume regulation. Resistance class K90, with ventilation duct made of non-flammable building materials connected on one side. When connected to flammable ventilation ducts, its resistance class is K 30. The fire damper poppet valve may be fitted in walls made of masonry to DIN 1053 with a thickness of ≥ 115 mm or...

Open the catalog to page 5

Fire damper poppet valve SVA-FS Technical documentation Order code ORDER CODE SVA-FS EXAMPLE SVAFS-100-9010-Z00 Type SVAFS = Fire damper poppet valve SVA-FS | Nominal size = 100 mm | 9010 = Paint RAL9010| Accessories Z00 = without accessories ORDER DETAILS 01 - TYPE SVAFS = fire damper poppet valve SVA-FS 02 - NOMINAL SIZE 100 - 150 in mm - always with three digits 03 - PAINT 9010 = RAL colour white (standard) xxxx = RAL colour on request (always with 4 digits) 04 - ACCESSORIES Z00 = without accessories (standard) ZVS = extension spigot Construction subject to change No return possible

Open the catalog to page 6

Fire damper poppet valve SVA-FS Technical documentation Service SERVICE Functional checking, cleaning, repair Polluted and damp air can impair the permanent operational safety. This is why, after commissioning the ventilation system, all shut-off devices must be checked for proper function at six-month intervals, according to section 4 of the general building supervisory approval/general type approval Z-41.3-312. If two consecutive functional tests show no defects, the shut-off devices only have to be checked at a yearly interval. • Check the connection opening and the wall sleeve (pos. 1)...

Open the catalog to page 7

Fire damper poppet valve SVA-FS Technical documentation Service Sample Functional test protocol for Cons. No.__________ Usability certificate: Series: Release device: SCHAKO Ferdinand Schad KG Steigstrasse 25-27 D-78600 Kolbingen Phone: +49- (0)7463 / 980-0 Fax: +49- (0)7463 / 980-200 email: info@schako.de Web: schako.com Construction subject to change No return possible

Open the catalog to page 8

Fire damper poppet valve SVA-FS Technical documentation Service SCHAKO Ferdinand Schad KG Steigstrasse 25-27 D-78600 Kolbingen Phone: +49- (0)7463 / 980-0 Fax: +49- (0)7463 / 980-200 email: info@schako.de Web: schako.com Sample Functional test protocol for____________________ Cons. No. ____________________ Defects found during the test on: Defects found during the test on: Defects found during the test on: Defects found during the test on: Construction subject to change No return possible

Open the catalog to page 9

Fire damper poppet valve SVA-FS Technical documentation Foreign branch offices Construction subject to change No return possible

Open the catalog to page 10

Fire damper poppet valve SVA-FS Technical documentation List of figures/tables/diagrams List of diagrams Diagramm 1: Druckverlust und Lautstärke SVA-FS 150 5 Construction subject to change No return possible

Open the catalog to page 11