07/08 - 2 Construction subject to change. Stand: 24.07.2019 No return possible!

Lint separator FLARE Description To separate textile fibre from the return air of clean rooms, in particular operating theatres and their adjoining rooms, a lint separator is used. The separation takes place directly at the extraction point. As a component of the ventilation installation, the separator is mounted in the exhaust air outlet flush with the operating theatre wall or in overflow openings. This protects the air-conditioning ducts and the downstream filters by separating fibre particles in the operating theatre area and allows an economic and smooth operation of the ventilation and...

Lint separator FLARE Models and dimensions Dimensions FLARE-...-SM-... with AK-36-...-S1 Detail Z as-delivered condition with fitted fixing lug On site with bent fixing lug Available sizes Spigot position - Lateral spigot (-S1, standard) - Spigot from above (-S0) - Spigot front side (-S4) Detail X Dimensions for spigot from above (-S0) and spigot front side (-S4) upon request. Minimum height KHS with spigot position -S1 / -S4: spigot diameter + 87 mm Minimum width KBS with spigot position -S0 / -S4: spigot diameter + 30 mm See page 5 for detail Y. See page 6 for dimensions of SM mounting. EO...

Lint separator FLARE Dimensions of accessories Damper (-DK1), for AK-... Installation frame (-ER1 / -ER2) 1__i-u_ Mounting frame design: - without wall anchor (-ER1) (standard) - with wall anchor (-ER2) (only at an extra charge) Mounting frames are only delivered with 4 wall anchors on special request. external (-Ia) In case of an external insulation, the fixing lugs are already bent in the as-delivered condition. Construction subject to change.

Lint separator FLARE Fastening methods Concealed mounting FLARE-...-VM-H=125/225 (1 each on H side) SM mounting FLARE-...-SM - with 4 sash locks 225x125 / 225x225 / 325x325 (LxH) FLARE-...-SM - with 6 sash locks 625x125 / 625x225 / 625x325 (LxH) Section A-A (drawn rotated by 90°) (Shown with plenum box AK-...) 1.) Concealed mounting 1.) with 4 or 6 indentations for on site slotted shallow-raised countersunk-head tapping screws DIN ISO 7051 pitch 3.9 Number of concealed mounting (-VM): H=125 / 225 with 2 concealed mountings VM11 H = 325 with 4 concealed mountings VM11 For number and position of...

Lint separator FLARE Technical data Pressure loss and noise level FLARE-...-225-125-... with AK-36-... 07/08 - 7 Construction subject to change. Stand: 24.07.2019 No return possible!

Construction subject to change.

Construction subject to change.

Lint separator FLARE FLARE-...-625-125-... with AK-36-... Return air volume Return air volume Pressure loss Density A-weighted sound power level Length Height approximately Construction subject to change.

Lint separator FLARE Order code FLARE 01 Sample FLARE-PS-625-125-A-9010-SM-ER0 Lint separator type FLARE I perforated sheet steel I grille length 625mm I grille height 125mm I return air I frame painted to RAL 9010 (white) I screw mounting I without mounting frame Order details 01 - Type FLARE = Rectangular lint separator 02 - Model PS = Perforated sheet steel with back-fitted wire fabric made of stainless steel 0.8 mm x 0.5 mm (standard) V2 = Stainless steel (V2A), perforated, with back-fitted wire fabric made of stainless steel 0.8 mm x 0.5 mm 03 - Length 225 = Grille length 225 mm 04 - Height...

Lint separator FLARE Order code AK 01 Plenum box, rectangular design I suitable for lint separator FLARE I length 425 mm I height 225 mm I standard length I with screw mounting I sheet steel I with damper | with rubber lip seal | without box insulation | standard height of box | standard width of box I standard spigot diameter | lateral spigot Order details 01 - Plenum box AK = Plenum box, rectangular design 02 - Air diffuser (must be ordered separately) 36 = suitable for FLARE-... 03 - Length 225 = Grille length 225 mm 04 - Height 125 = Grille height 125 mm 05 - Single / band design N = Single...

Lint separator FLARE Specification texts Lint separator for filtering textile fibre charged return air from clean rooms, consisting of a rectangular frame and a fitted, replaceable lint separator insert made of sheet steel painted to RAL 9010 (white) (-PS-9010), sheet steel painted to RaL colour which can be freely selected (-PS-xxxx) or stainless steel 1.4301 (V2A) sand silver painted (-V2-SAND), with back-fitted wire fabric made of stainless steel 1.4301 (V2A), mesh width 0.8 mm x 0.5 mm. For cleaning and disinfection purposes, easy to disassemble by turning the sash lock. Product: SCHAKO type...