07/09 - 2 Construction subject to change. Version: 21.09.2018 No return possible!

Compact Filter Grille KGF Description The compact filter grille type KGF can be used in both supply and return air installations. Owing to its compact construction, the front frame, blades for air distribution and the hit-and-miss damper for air volume control consist of a single component, as a result of which the compact filter grille requires only a small mounting depth. This small mounting depth reduces vortex formation at the hit-and-miss damper, thus ensuring uniform air intake over the entire diffuser surface of the grille. This means that, compared with grilles equipped with air throttle...

Compact Filter Grille KGF Models and dimensions Dimensions KGF-Q-08-... Available sizes All combined lengths and heights available! Special dimensions are not possible! Construction subject to change.

- Lateral spigot (-S1, standard) - Spigot from above (-S0) - Spigot front side (-S4) Dimensions and prices for spigot from above (-S0) and spigot front side (-S4) upon request. Rubber lip seal (-GD1) Detail Y Ceiling opening in the length / height with plenum box L+10 / H+10 Construction subject to change.

The cover frame is only available for type KGF-Q-...! A cover frame has been developed to allow concealed mounting (VM), which can be attached easily, after sliding two plastic parts onto the longitudinal side of the grille. This can also easily be done on grilles which have already been installed. Available sizes The curved flange and the three height dimensions, apart from providing high stability and torsional rigidity, allow optimum adaptation of the compact filter grille type KGF-R-... to sheet metal and spiral ducts. The selection of the grille height depends on the duct measures shown...

Compact Filter Grille KGF Order code KGF 01 Sample KGF-Q-08-615-115-L000-SV-0000-BR-ER0 Compact filter grille type KGF I grille for duct and box installation I pivoting horizontal air deflection blades on the front side, additionally with hit-and-miss damper and filter insert G4 | grille length 615 mm | grille height 115 mm | blade position straight | galvanised steel | without paint | with cover frame | without mounting frame Order details 01 - Type KGF = Compact filter grille type KFG 02 - Model Q = Grille for duct and box installation R = Grille for duct installation 03 - Blades 08 = Supply...

Compact Filter Grille KGF Order code AK KGF 01 Sample AK-51-00415-215-N-SM-SV-DK1-GD1-I0-KHS-KBS-SDS-S1 Plenum box, rectangular design I suitable for diffuser type KGF I length 415mm I height 215mm I standard length I screw mounting I galvanised sheet steel I with damper I with rubber lip seal I without box insulation I standard height of box I standard width of box I standard spigot diameter I lateral spigot Order details 01 - Type AK = Plenum box, rectangular design 02 - Air diffuser 51 = Compact filter grille type KFG 03 - Length 00315 = Length 315 mm 00415 = Length 415 mm 00515 = Length 515...

Compact Filter Grille KGF Specification texts Compact filter grille type KGF-Q-08-... for supply and return air, for installation in rectangular ductwork. This model consists of a front frame with visible screw mounting (SM), with pivoting horizontal air deflection blades and integrated hit-and-miss damper for air volume regulation. With integrated filter insert G 4 (dry layer filter mat). Blade insert removable from the front side. Product: SCHAKO type KGF-Q-08-... - Compact filter grille made of - Galvanised sheet steel - Galvanised sheet steel, front side painted to RAL colour 9010 (white)...