02/04 - 2 Construction subject to change. Version: 20.09.2019 No return possible!

Model IDA-Q IDA-R IDA-...-ZH Ceiling Diffuser IDA Description Electrically adjustable ceiling diffusers are required for cooling and heating large halls. In order to prevent draughts in the cooling mode, the supply air must largely be discharged horizontally from the diffuser. However, in heating mode, the diffuser must have high penetration depth, in order to achieve fast and efficient heating. The ceiling diffuser type IDA meets both these requirements ideally. It ensures optimum air distribution in cooling and heating modes. The diffuser consists of an adjustable air guide funnel and a front...

Ceiling Diffuser IDA Fastening Concealed mounting (-VM, as standard) - Pole brace fixing, by means of an Allen screw M6 (to DIN EN ISO 4762) at the plenum box. Screw mounting (-SM) - for model with ball-impact guard only - with raised countersunk head tapping screws (on site) Screw mounting with concealed mounting (-VS) - Screw mounting (-SM) in combination with concealed mounting (-VM) - only possible for NW 800 in conjunction with ball-impact guard (-BS) Smoke test Snapshots of IDA-Q-Z-600-..., mounting height = 4 m Heating mode Cooling mode Layout example Assume: Selected: possible installation...

Ceiling Diffuser IDA Models and dimensions Dimensions IDA-Q-Z-... with plenum box type SK-Q-08-Z-...-S1 painted inside 9005 (black) IDA-Q-AA-... with plenum box type SK-Q-08-A-...-S1 painted inside 9005 (black) Spigot positions 02/04 - 5 Construction subject to change. Version: 20.09.2019 No return possi

<HS= standard height of plenum box Special height of plenum box = 0D + 147 mm, but at least 245 mm Spigot positions 02/04 - 6 Version: 20.09.2019 Construction subject to change.

Ceiling Diffuser IDADimensions of accessories Damper (-DK1) with cable-operated adjustment (-DK2) Insulation for SK-... internal (-Ii) external (-Ia) Rubber lip seal (-GD1) Detail X Electric actuator (-E090/ -E092 / -E093) 24 V AC / 230 V AC (3-point activation) ROB version (-ROB1) Removable damper and volumetric flow meter (possible only for plenum box Sk-Q-...). Available sizes Construction subject to change.

Ceiling Diffuser IDA ball-impact guard (-BS) (only possible for IDA-Q-... with screw mounting and for NW 800 with concealed mounting) Fastening methods Screw mounting (-SM) (IDA-Q-... only) for model with ball-impact guard only NW400-600 Indentation for slotted shallow-raised countersunk-head tapping screw (on site) - NW 400-800: DIN ISO 7051 pitch 4.8 Dimensions VS mounting (for NW 800 only) Indentation for slotted shallow-raised countersunk-head tapping screw DIN ISO 7051 pitch 4.8 (on site) Attention: With reduced drill pattern, only possible with plenum box in the same size as the faceplate....

Ceiling Diffuser IDA Concealed mounting (-VM) For concealed mounting (VM), the ceiling diffuser IDA NW 400625 is fixed to the plenum box with a traverse and a hexagonal socket head screw M6 (according to DIN EN ISO 4762) and the IDA NW 800 with two hexagonal socket head screws M6 (according to DIN EN ISO 4762). This applies to sizes up to and including NW625. This applies to sizes up to and including NW625. This applies to sizes up to and including NW625. This applies to sizes up to and including NW625. 02/04 - 9 Construction subject to change. Version: 20.09.2019 No return possible!

Ceiling Diffuser IDA Technical data Pressure loss and noise level IDA-...-ZH-400-... (Cooling mode) 02/04 - 10 Construction subject to change. Version: 20.09.2019 No return possible!

Ceiling Diffuser IDA IDA-...-ZH-600/625-... (Cooling mode) 02/04 - 11 Construction subject to change. Version: 20.09.2019 No return possible!

Construction subject to change. Version: 20.09.2019 No return possible!

Ceiling Diffuser IDA Maximum end velocity of jet (isothermal) with coanda effect 02/04 - 13 Construction subject to change. Version: 20.09.2019 No return possible!

Ceiling Diffuser IDACritical throw Construction subject to change.

Ceiling Diffuser IDA Maximum penetration 02/04 - 15 Construction subject to change. Version: 20.09.2019 No return possible!

Ceiling Diffuser IDA Temperature and induction ratios 02/04 - 16 Construction subject to change. Version: 20.09.2019 No return possible!

Ceiling Diffuser IDAConnection diagrams of electric actuators Technical data of electric actuatorsMake Siemens -E092 (GLB 331.2.E three-point control) Make Siemens -E092 (GLB 331.2.E) / -E090 (GLB 131.2.E) (standard) / -E093 (GLB 136.2.E) Note: We recommend switching off the drive voltage after reaching the controller position. Make Siemens -E093 (GLB 136.2.E three-point control) (with 2 integrated auxiliary switches) Construction subject to change.

Ceiling Diffuser IDA Legend Vzu (m3/h) [l/s] = Vab (m3/h) [l/s] = Vx (m3/h) [l/s] = vmax (m/s) = Supply air volume Return air volume Total air jet volume at point x Maximum end velocity of jet Average end velocity of jet (vmittel = vmax x °-5) horizontal throw vertical throw Horizontal + vertical throw Critical throw Maximum penetration in heating mode Density Pressure loss A-weighted sound power level Temperature difference between supply air temperature and room temperature (aTo = tzu - tR) Temperature difference at point x Supply air temperature Room temperature Induction ratio (i=Vx/Vzu)...

Ceiling Diffuser IDA IDA order code 01 Sample IDA-Q-ZH-500-SB-000-9010-VM-B0-E000 Ceiling diffuser type IDA I square faceplate I horizontal supply air I size 500 I sheet steel I drill pattern not reduced I RAL 9010 white I concealed mounting I without ball-impact guard I without actuator Order details 01 - Type IDA = Ceiling Diffuser 02 - Model Q = square faceplate with manually adjustable ventilation funnel R = round faceplate with manually adjustable ventilation funnel 03 - Air throw ZH = Horizontal supply air (standard) ZV = Vertical supply air AA = Return air 04 - Nominal size 400 = NW 400...

Ceiling Diffuser IDA Order code SK-...-08-... 01 09 - Rubber lip seal GD0 = Without rubber lip seal (standard) GD1 = With rubber lip seal 10 - Volumetric flow meter VME0 = without volumetric flow meter in the plenum box (standard) VME1 = with volumetric flow meter in the plenum box 11 - ROB version ROB0 = Without ROB version (standard) ROB1 = With ROB version (not possible for SK-R-...) 12 - Insulation l0 = Without insulation (standard) la = With box insulation outside li = With box insulation inside 13 - Height of box KHS = Height of plenum box standard xxx = Height of box in mm (minimum height...