Catalogs >
SCHAKO KG >
IB-R

IB-R
1 / 15Pages

Catalog excerpts

01/09 - 2 Construction subject to change. Version: 24.11.2017 No return possible!

Description Supply and return air grille especially suitable for duct connec- Installati0n Situati0n tion with horizontal or vertical individually adjustable air deflection blades on the front side. With hit-and-miss damper for air volume regulation Construction Blades and frames - Sheet steel painted to RAL 9010 (white) (-SB-9010) - Electrolytically galvanised sheet steel (standard) (-SV-0000) Hit-and-miss damper - Electrolytically galvanised sheet steel (only IB-R-08-... and IB-R-15-...) Model IB-R-01-... - horizontal air deflection blades IB-R-08-... - Horizontal air deflection blades...

Open the catalog to page 3

Ventilation Grille Model IB-R Models and dimensions Dimensions IB-R-01-... All combined lengths and heights available! Other sizes available on request. Construction subject to change.

Open the catalog to page 4

All combined lengths and heights available! Other sizes available on request. Construction subject to change.

Open the catalog to page 5

Ventilation Grille Model IB-R Technical data Pressure loss and noise level Supply air face velocity IB-R-... with hit-and-miss damper (supply air) Hit-and-miss damper position OPEN in % 01/09 - 6 Construction subject to change. Version: 24.11.2017 No return possible!

Open the catalog to page 6

Ventilation Grille Model IB-R Return air face velocity IB-R-... with hit-and-miss damper (return air) Hit-and-miss damper position OPEN in % Supply and return air Face area in (m²) Correction factor Supply air 01/09 - 7 Construction subject to change. Version: 24.11.2017 No return possible!

Open the catalog to page 7

Ventilation Grille Model IB-R Maximum end velocity of jet Supply air without coanda effect Supply air with coanda effect 01/09 - 8 Construction subject to change. Version: 24.11.2017 No return possible!

Open the catalog to page 8

Ventilation Grille Model IB-R Jet path Supply air without coanda effect Heating Cooling Critical throw Supply air with coanda effect 01/09 - 9 Construction subject to change. Version: 24.11.2017 No return possible!

Open the catalog to page 9

“HAk#Ventilation Grille Model IB-RMaximum penetration In heating mode Construction subject to change.

Open the catalog to page 10

Ventilation Grille Model IB-R Induction and temperature ratios Supply air without coanda effect Supply air with coanda effect Minimum distances Supply air without coanda effect Supply air with coanda effect If the selected minimum distance "z" is less than (x • 0.2), the grille is referred to as a grille band. 01/09 - 11 Construction subject to change. Version: 24.11.2017 No return possible!

Open the catalog to page 11

Ventilation Grille Model IB-RCorrection factor (for scattered air jet) Blade position opposite to one another (-LGEG) Blade position straight diverging Blade position The angle of propagation of the air jet and thus the length of throw can be affected by adjusting the vertical air deflection blades. Layout example Assume: Ventilation grille IB-R-08-... H = 115 mm L =615 m (with coanda effect) x =6.0 m Find: Pressure loss, sound level, end velocity of jet, critical throw, induction and temperature ratios. Solution: - Pressure loss (page 6): Apt = 22 Pa - Weighted sound power level page 6/7...

Open the catalog to page 12

Ventilation Grille Model IB-R Legend Vzu (m3/h) [l/s] = Vab (m3/h) [l/s] = Vx (m3/h) [l/s] = vmax (m/s) = Supply air volume Return air volume total air jet volume at point x Maximum end velocity of jet Duct velocity Intake velocity, blower stream velocity, outflow velocity, relative to Astirn Face area horizontal throw vertical throw Critical throw Density Pressure loss A-weighted sound power level [Lwa = lwai + KF] A-weighted sound power level, relative to Astirn = 0.08 m2 AT0 (K) = Temperature difference between supply air temperature and room temperature (AT0 = tzu - tR) AToh (K) =...

Open the catalog to page 13

Ventilation Grille Model IB-R Order code IB-R 01 Sample IB-R-01-0615-115-N-L000-SB-9010-SM-ER0 Ventilation grille type IB I for duct installation I horizontal pivoting air deflection blades on the front side I grille length 615 mm I grille height 115 mm | single length | blade position straight | sheet steel | painted to RAL9010 | with screw mounting | without installation frame Order details 01 - Type IB = Ventilation Grid Model IB 02 - Model R = For duct installation 03 - Blades 01 = Horizontal pivoting air deflection blades at the front side 08 = same as IB-R-01, additionally with...

Open the catalog to page 14

Ventilation Grille Model IB-R Specification texts Supply and return air grille for installation in sheet metal / spiral ducts. Consisting of horizontal, pivoting and individually adjustable air deflection blades on the front side. Frames and blades made of sheet steel painted to RAL 9010 (white) or of electrolytically galvanised sheet steel. Fastening by means of screw mounting (-SM). Product: SCHAKO type IB-R-01-... - With front side vertical, pivoting and individually adjustable air deflection blades. Product: SCHAKO type IB-R-10-... - With front side horizontal, pivoting and individually...

Open the catalog to page 15