Catalogs >
SCHAKO KG >
FLARE

FLARE
1 / 13Pages

Catalog excerpts

07/08 - 2 Construction subject to change. Stand: 22.02.2018 No return possible!

Lint separator FLARE Description To separate textile fibre from the return air of clean rooms, in particular operating theatres and their adjoining rooms, a lint separator is used. The separation takes place directly at the extraction point. As a component of the ventilation installation, the separator is mounted in the exhaust air outlet flush with the operating theatre wall or in overflow openings. This protects the air-conditioning ducts and the downstream filters by separating fibre particles in the operating theatre area and allows an economic and smooth operation of the ventilation...

Open the catalog to page 3

Lint separator FLARE Models and dimensions Dimensions FLARE-...-SM-... with AK-36-...-S1 Detail X Z as-delivered condition with fitted fixing lug Z with bent fixing lug Available sizes Spigot arrangement for plenum box L - Spigot from above (-S0) - Lateral spigot (-S1, standard) - Spigot front side (-S4) Dimensions and prices for spigot from above (-S0) and spigot front side (-S4) upon request. 07/08 - 4 Construction subject to change. Stand: 22.02.2018 No return possible!

Open the catalog to page 4

Mounting frames are only delivered with 4 wall anchors on special request (at an extra charge) (-ER2). Construction subject to change.

Open the catalog to page 5

Lint separator FLARE Fastening methods Concealed mounting FLARE-...-VM - with 2x VM11 (1 each on H side) 225x125 / 325x125 / 425x125 / 525x125 / 625x125 / 225x225 / 325x225 / 425x225 / 525x225 / 625x225 SM mounting FLARE-...-SM - with 4 sash locks 225x125 / 225x225 / 325x325 1.) with 4 or 6 indentations for on-site slotted shallow-raised countersunk-head tapping screws DIN ISO 7051 pitch 3.9 For number and position of sash locks, see SM mounting. 07/08 - 6 Construction subject to change. Stand: 22.02.2018 No return possible!

Open the catalog to page 6

Lint separator FLARE Technical data Pressure loss and noise level FLARE-...-225-125-... with AK-36-... 07/08 - 7 Construction subject to change. Stand: 22.02.2018 No return possible!

Open the catalog to page 7

Lint separator FLARE FLARE-...-325-225-... with AK-36-... 07/08 - 8 Construction subject to change. Stand: 22.02.2018 No return possible!

Open the catalog to page 8

Lint separator FLARE FLARE-...-425-325-... with AK-36-... 07/08 - 9 Construction subject to change. Stand: 22.02.2018 No return possible!

Open the catalog to page 9

Return air volume Return air volume Pressure loss Density A-weighted sound power level Length Width approximately Construction subject to change.

Open the catalog to page 10

ICHAK#Lint separator FLARE Order code FLARE 01 Sample FLARE-PS-625-125-A-9010-SM-ER0 Lint separator type FLARE I perforated sheet steel I grille length 625mm I grille height 125mm I return air I frame painted to RAL 9010 (white) I screw mounting I without mounting frame Order details 01 - Type FLARE = Rectangular lint separator 02 - Model PS = Perforated sheet steel with back-fitted wire fabric made of stainless steel 0.8 mm x 0.5 mm (standard) V2 = Stainless steel (V2A), perforated, with back-fitted wire fabric made of stainless steel 0.8 mm x 0.5 mm 03 - Length 225 = Grille length 225 mm...

Open the catalog to page 11

Lint separator FLARE Order code AK 01 Plenum box, rectangular design I suitable for lint separator FLARE I length 425 mm I height 225 mm I standard length I with screw mounting I sheet steel painted to RAL 9010 (white) I with damper | with rubber lip seal | without box insulation | standard height of box | standard width of box I standard spigot diameter | lateral spigot Order details 01 - Plenum box AK = Plenum box, rectangular design 02 - Air diffuser (must be ordered separately) 36 = suitable for FLARE-... 03 - Length 225 = Grille length 225 mm 04 - Height 125 = Grille height 125 mm 225...

Open the catalog to page 12

Lint separator FLARE Specification texts Lint separator for filtering textile fibre charged return air from clean rooms, consisting of a rectangular frame and a fitted, replaceable lint separator insert made of sheet steel painted to RAL 9010 (white) (-PS) or stainless steel 1.4301 (V2A) (-V2) sand silver painted (-SAND), with back-fitted wire fabric made of stainless steel 1.4301 (V2A), mesh width 0.8 mm x 0.5 mm. Fastening by means of screw mounting (-SM) or concealed mounting (-VM). For cleaning and disinfection purposes, easy to disassemble by turning the sash lock. Product: SCHAKO type...

Open the catalog to page 13