FKW
1 / 28Pages

Catalog excerpts

07/07 - 2 Construction subject to change. Version: 01.04.2020 No return possible!

Particle Filter Box FKW Description The particle filter unit, type FKW, has been particularly developed for use in cleanrooms required by the pharmaceutical, electronical, precision mechanical and optical industry in hospitals and laboratories. The integrated particle filter (to DIN EN 1822) removes particles, radioactive dust, mist, bacteria, viruses, etc., from the supply or return air. This ensures that the incoming and outgoing air flows are extremely clean and germfree. The filter box type FKW consists of electrolytically galvanised sheet steel painted to RAL 9010 (white). A filter...

Open the catalog to page 3

FKW-...-V-...-M000-... FKW-...-V-...-M001-... FKW-...-Q-... FDBB-... FKAL-... Construction Filter box - electrolytically galvanised sheet steel (-SB) - painted inside and outside, RAL colour 9010 (white) (9010) - painted inside and outside, colour can be freely selected (- xxxx) - Stainless steel V2A (-V2-0000, at an extra charge) shut-off damper - Galvanised sheet steel (only available for -SB) - Stainless steel V2A, 1.4301 (only available for -V2) Differential pressure device/aerosol monitoring device (-D1) - with measuring spigot inside the box, for hose connection with an outer diameter...

Open the catalog to page 4

Particle Filter Box FKW Fastening Magnetic fastening (-MB) - only available as sheet steel model (-SB) - only available for air diffuser FDBB-...-SB (standard). - not available for air diffuser FDBB-...-AL, FDBB-...-V2 and FKAL. Concealed mounting (-VM) - pole brace fastening - Standard for air diffuser FDBB-...-AL, FDBB-...-V2 and FKAL. - FDBB-...-SB at an extra charge. Air diffuser FDBB FDBB-A-Z1/Z2-... (supply air) FDBB-A-AB-... (Return air with blades) FDBB-A-AA-... (Return air, without blades) Air diffuser FKAL FKAL-... 07/07 - 5 Construction subject to change. Version: 01.04.2020 No...

Open the catalog to page 5

Particle Filter Box FKW Models and dimensions Dimensions FKW-...-H-...-M000-D1-...-P0-... Available sizes 1.) = Mounting bracket with long hole ø 10 x 20 FIL = Particle filter For seal leakage monitoring system/differential pressure device/ aerosol monitoring device, see page 9. 07/05 - 6 Construction subject to change. Version: 01.04.2020 No return possible!

Open the catalog to page 6

Particle Filter Box FKW FKW-...-H-...-Exxx-D1-...-P0-... Actuator with spring return Actuator without spring return Attention! With the FKW-...-V model, the actuator cannot be mounted to the shut-off damper! 07/07 - 7 Construction subject to change. Version: 01.04.2020 No return possible!

Open the catalog to page 7

Manually adjustable shut-off damper with cable (-M001) (not available for FKW-...-Q !) Detail Y Connection flange suitable for Metu systems HM 20 and HM 30 Available sizes 07/05 - 8 Construction subject to change. Version: 01.04.2020 No return possible!

Open the catalog to page 8

Differential pressure device/aerosol monitoring device applies to models -H and -V FKW-...-D1 (standard) With measuring spigot inside the box, for hose connection with an outer diameter of 10 mm. FKW-...-D2 (at an extra charge) With measuring spigot inside the box, for hose connection with an outer diameter of 10 mm. Additionally with 2 measuring spigots on the box outside, for a hose with an inner diameter of 4 mm. FKW-...-D4 (at an extra charge) With measuring spigot inside the box, for hose connection with an outer diameter of 10 mm. Additionally with aerosol feeding device in the spigot...

Open the catalog to page 9

Particle Filter Box FKWapplies to model -Q FKW-...-D1 (standard) With measuring spigot inside the box, for hose connection with an outer diameter of 10 mm. FKW-...-D2 (at an extra charge) With measuring spigot inside the box, for hose connection with an outer diameter of 10 mm. Additionally with 2 measuring spigots on the box outside, for a hose with an inner diameter of 4 mm. FKW-...-D4 (at an extra charge) With measuring spigot inside the box, for hose connection with an outer diameter of 10 mm. Additionally with aerosol feeding device in the spigot of the box inside. FKW-...-D5 (at an...

Open the catalog to page 10

FKW-...-P1 for model -H and -V (at an extra charge) Seal leakage monitoring system inside the box (only for particle filters with U seal). Particle Filter Box FKWTight seal test Dimensions of accessories (at an extra charge) Rubber lip seal (-GD1) Detail X not for model FKW-...-Q-...! FKW-...-P1 for model -Q (at an extra charge) Seal leakage monitoring system inside the box (only for particle filters with U seal). Differential pressure transducer (-U1) Only available in connection with differential pressure/aerosol monitoring devices -D2 and -D3. Supplied loose or optionally mounted to box...

Open the catalog to page 11

Particle Filter Box FKW Air diffusers The air diffusers FDBB and FKAL are models especially designed for filter box FKW. Theses air diffusers can only be used in connection with filter box FKW. Their ventilation characteristics are identical to those of the standard air diffusers DBB-... and AL02. Air diffuser FDBB Construction Faceplate - Sheet steel (-SB) - only available with paint - Painted to the RAL colour 9010 (white) (-9010) - painted, RAL colour can be freely selected (-xxxx) - Natural colour anodised aluminium (-AL-ELOX) (only possible with concealed mounting) - Stainless steel...

Open the catalog to page 12

Particle Filter Box FKW Dimensions FDBB-A-Z1-625-315-...-VM-... FDBB-A-Z2-625-315-...-VM-... FDBB-A-AB-625-315-...-VM-... 07/07 - 13 Construction subject to change. Version: 01.04.2020 No return possible!

Open the catalog to page 13

Particle Filter Box FKW Air diffuser FKAL Construction Frame and blades - Natural colour anodised aluminium (E6/EV1) (-ELOX) - Aluminium painted to RAL colour which can be freely selected (-xxxx) (at an extra charge) Model FKAL - front side horizontal, pivoting air deflection blades with front side vertical, pivoting air deflection blades behind them. Size - 625 x 315 (length x height) Fastening Concealed mounting (-VM) - Pole brace fastening, by means of a M6 cylinder screw (according to DIN EN ISO 4762) at the particle filter box Blade position 84° diverging (-L084) The angle of...

Open the catalog to page 14

Particle Filter Box FKW Fastening methods Magnetic fastening (-MB) With safety cable, only available for FDBB-...-SB, only possible for installation in front of the wall. In concealed mounting, the air diffuser is fixed to the particle filter box by means of a pole brace and an M6x60 cylinder head screw (according to DIN EN ISO 4762). 07/07 - 15 Construction subject to change. Version: 01.04.2020 No return possible!

Open the catalog to page 15