Catalogs >
SCHAKO KG >
DSX-XXL-W

DSX-XXL-W
1 / 25Pages

Add to favorites

Catalog excerpts

Wall Slot Diffuser DSX-XXL-W

Open the catalog to page 1

04/05 - 2 Construction subject to change. Version: 08.02.2019 No return possible!

Open the catalog to page 2

Wall Slot Diffuser DSX-XXL-W Model DSX-XXL-W DSX-XXL-W-S DSX-XXL-W-P DSX-XXL-W-PA DSX-XXL-W-PB DSX-XXL-W-...-1/2 DSX-XXL-W-...-Z DSX-XXL-W-...-A 6Description The architecturally attractive wall slot diffuser type DSX-XXL-W-S is suitable for installation in or at wall systems. The models DSX-XXL-W-P, DSX-XXL-W-PA and DSX-XXL-W-PB with a continuous frame are suitable for achieving a good and clean finish when installed in a wall. The high induction ensures fast reduction of the air outflow velocity and of the temperature difference in cooling mode. The air outflow direction is set in-factory...

Open the catalog to page 3

Wall Slot Diffuser DSX-XXL-W Fastening permanent connection - Standard for models DSX-XXL-W-... Concealed mounting (-VM) - Standard for band design with plenum box (-ASK) - available for single diffusers with plenum box (-ASK) Construction subject to change.

Open the catalog to page 4

Wall Slot Diffuser DSX-XXL-W Models and dimensions Air throw pattern Air guide element position diagonally upwards (-LV) for supply and return air models Dimensions DSX-XXL-W-P, with frame profile DSX-XXL-W-S: with narrow frame profile DSX-XXL-W-PB - with wide frame profile DSX-XXL-W-PA: with U-frame profile 1.) anodised model 2.) painted model 04/05 - 5 Construction subject to change. Version: 08.02.2019 No return possible!

Open the catalog to page 5

Wall Slot Diffuser DSX-XXL-W Dimensions of accessories Plenum box type ASK-W for DSX-XXL-W-... Available sizes Section A-A / Diffuser mounting Standard: at an extra charge: Insulation for plenum box internal (-li) = Height of plenum box = Total height View B (drawn rotated by 90°) with 1 connection spigot with 2 spigots To facilitate ceiling mounting, the plenum boxes can be provided with an M4 riveting nut. When delivered without plenum box, mounting must be done onsite. Rubber lip seal (-GD) Detail Y Damper (-DK) for plenum box type ASK-W Cable-operated adjustment 04/05 - 6 Construction...

Open the catalog to page 6

Wall Slot Diffuser DSX-XXL-W DL = Difference distance BL = Length of band L = 500/1000/1500 mm Detail a, without end pieces DSX-XXL-W-S / DSX-XXL-W-PADSX-XXL-W-P / DSX-XXL-W-PB DL = Difference distance BL = Length of band L = 500/1000/1500 mm Detail b, with end pieces DSX-XXL-W-S (-ES1) DSX-XXL-W-P (-ES2) / DSX-XXL-W-PB (-ES3) When the ceiling slot diffuser type DSX-XXL is designed as a band > 2000 mm, the total length BL is assembled from standard lengths L = 1500 mm. The difference pieces <1500 mm to >400 mm can be fitted with a plenum box. The difference pieces <400 mm are supplied as...

Open the catalog to page 7

Wall Slot Diffuser DSX-XXL-W End piece (-ES1 / -ES2 / -ES3) To give the impression of a surrounding frame, side end pieces can be installed (for an additional charge). These end pieces are supplied loose as standard. If there are order details regarding fitting, mounting will take place at the factory. for DSX-XXL-W-S (-ES1) for DSX-XXL-W-P (-ES2) for DSX-XXL-W-PB (-ES3) Please specify when ordering whether end pieces are to be fitted on both sides of the diffuser or on the left or right side. Construction subject to change.

Open the catalog to page 8

Wall Slot Diffuser DSX-XXL-W Connection element for band design (supplied loose as standard) active - active Mounting handle for double blade Detail of connection element 3 Double blade active - passive Fastening screw: Torx screw M4 DIN 7991-TX passive - passive Fastening screw: Torx screw M4 DIN 7991-TX 04/05 - 9 Construction subject to change. Version: 08.02.2019 No return possible!

Open the catalog to page 9

Wall Slot Diffuser DSX-XXL-W Dummy piece (-BS) DSX-XXL-W-P-1 Mounting bracket (pair) (-BW) for operation with overflow air DSX-XXL-W-P-1 Arrangement of the mounting holes in the dummy plate DSX-XXL-W-...-1 (1-slot) with 2 mounting holes Arrangement of the mounting holes DSX-XXL-W-...-1 (1-slot) with 2 mounting holes DSX-XXL-W-...-2 (2-slot) with 4 mounting holes DSX-XXL-W-...-2 (2-slot) with 4 mounting holes In the dummy design, no operation with overflow air is possible since the slot diffuser is completely closed at the back. 04/05 - 10 Construction subject to change. Version: 08.02.2019...

Open the catalog to page 10

Wall Slot Diffuser DSX-XXL-WBand design for operation with overflow air or dummy plates In the band design for operation with overflow air or dummy plates, two additional fishplates are supplied loose, thus only requiring two threaded bars on-site for suspension. Fastening methods Concealed mounting (-VM) with plenum box DSX-XXL-W...-1 and DSX-XXL-W-...2 (1- and 2-slot) On request, the plenum box can be mounted rotated. This must be specified when ordering the plenum box. The clearance between ceiling and upper edge of the diffuser must not exceed 0.5 m, otherwise no coanda effect is...

Open the catalog to page 11

Wall Slot Diffuser DSX-XXL-W Technical data Pressure loss and noise level DSX-XXL-W-...1 L=400 (supply air) 100% = Damper OPEN 04/05 - 12 Construction subject to change. Version: 08.02.2019 No return possible!

Open the catalog to page 12

Wall Slot Diffuser DSX-XXL-W DSX-XXL-W-...1 L=600 (supply air) 04/05 - 13 Construction subject to change. Version: 08.02.2019 No return possible!

Open the catalog to page 13

Wall Slot Diffuser DSX-XXL-W DSX-XXL-W-...1 L=1000 (supply air) 04/05 - 14 Construction subject to change. Version: 08.02.2019 No return possible!

Open the catalog to page 14

Wall Slot Diffuser DSX-XXL-W DSX-XXL-W-...1 L=500 (return air) 100% = Damper OPEN 04/05 - 15 Construction subject to change. Version: 08.02.2019 No return possible!

Open the catalog to page 15

Wall Slot Diffuser DSX-XXL-W DSX-XXL-W-...1 L=800 (return air) 04/05 - 16 Construction subject to change. Version: 08.02.2019 No return possible!

Open the catalog to page 16

Wall Slot Diffuser DSX-XXL-W Maximum end velocity of jet DSX-XXL-W-...-1 L=400 Correction factor for DSX-XXL-W-...-2: vmax × 1.33 04/05 - 17 Construction subject to change. Version: 08.02.2019 No return possible!

Open the catalog to page 17

Calculation of the maximum throw distance in cooling mode DSX-XXL-W-...-1 L=400 x = xkr x 2, 66 Correction factor for DSX-XXL-W-...-2: xkr x 1.17 04/05 - 18 Version: 08.02.2019 Construction subject to change. No return possible!

Open the catalog to page 18

Wall Slot Diffuser DSX-XXL-W DSX-XXL-W-...-1 L=800 Induction ratios and temperature ratios DSX-XXL-W-...-1 04/05 - 19 Construction subject to change. Version: 08.02.2019 No return possible!

Open the catalog to page 19