DSC
1 / 37Pages

Catalog excerpts

Technical documentation SCHAKO | Ferdinand Schad KG Steigstrasse 25-27 D-78600 Kolbingen

DSC TECHNICAL DOCUMENTATION Function and use | Models The slot diffuser type DSC is suitable for use in rooms with a DSC-1-... height between 2.6 and 4 m. The air deflection blades ad- DSC-2-... justable from below allow a versatile application. The outflow DSC-3-... direction can be adjusted from a vertical throw in heating DSC-4-... mode to a horizontal throw in cooling mode. In cooling mode, DSC-...-Z a one- or two-way air throw pattern or a multi-direction DSC-...-A throw pattern can be set. The support profile section blades DSC-...-R0 create such a stable jet that, for the two-way air...

Open the catalog to page 2

TECHNICAL DOCUMENTATION Mounting | Blade position for air jet MOUNTING Without connection (-00) -- Only possible without plenum box and hit-and-miss damper. Permanent connection (-FV, standard) -- Only possible with plenum box. -- As standard for the models DSC-R0, DSC-S0 and DSC-P0. -- The slot diffuser is permanently connected to the plenum box. Concealed mounting (-VM) -- Only possible with plenum box. -- Possible for the models DSC-R0 / DSC-P0 and DSC-S0-Z1 / Z2 (with additional profile). -- Not possible for the models DSC-S0-Z0 / DSC-S0-Z3. -- The slot diffuser is screwed to the pole...

Open the catalog to page 3

QUICK SELECTION BLADE POSITION D LWA[dB(A)] DSC TECHNICAL DOCUMENTATION Processing | PROCESSING Frame surface -- Natural colour anodised aluminium (-ELOX, standard). -- Painted aluminium: - RAL 9006 (white aluminium) (-9006). - RAL 9010 (white) (-9010). - To a different RAL colour (at an extra charge) (-xxxx). Blade colour -- Plastic (hard PVC): - Colour similar to RAL 9005 (black, standard) (-L9005). - Colour similar to RAL 9006 (white aluminium) (-L9006). - Colour similar to RAL 9010 (white) (-L9010). - RAL colour can be freely selected (-Lxxxx) -- For return air, without blade (-00000),...

Open the catalog to page 4

DSC TECHNICAL DOCUMENTATION Accessories |ACCESSORIES End pieces (-E0 / -ES / -EB / -EL / -ER) -- Without end pieces (-E0). -- With end pieces: - Supplied loose (-ES, pair) (standard). - Mounted ex works on both sides (-EB). - Mounted ex works on the left side (-EL). - Mounted ex works on the right side (-ER). Made of aluminium (same colour as frame). Additional profile (-Z0 / -Z1 / -Z2 / -Z3) -- Without additional profile (-Z0). -- With additional profile (only possible for DSC-S0): - Z I (-Z1): connection of ceiling panels. - Z II (-Z2): connection of panelled ceilings. - Z III (-Z3):...

Open the catalog to page 5

DSC TECHNICAL DOCUMENTATION Accessories | -- Angle between sides: - 90° (-090) - Angle as required (-xxx), values between a = 90° (-090, standard) and 170° (-170) are possible. -- Left-side length (a): - Standard length L=250 for 1- / 2- / 3-slot models / L=400 for 4-slot models (-000) - Length can be freely selected (-xxx) (minimum length = standard length) -- Right-side length (b): - Standard length L=250 for 1- / 2- / 3-slot models / L=400 for 4-slot models (-000) - Length can be freely selected (-xxx) (minimum length = standard length) -- Including 4 fishplates (-VL, included in...

Open the catalog to page 6

TECHNICAL DOCUMENTATION Dimensions of frame profile | DIMENSIONS OF FRAME PROFILE Standard frame profile "R0" Narrow frame profile "S0" Special frame profile "P0" In the return air model, a perforated plate is mounted instead of the air deflection blades. * EÖB = installation opening width EÖL = installation opening length For the available lengths of the slot diffuser, see page 8. Construction subject to change No return possible

Open the catalog to page 7

DSC TECHNICAL DOCUMENTATION Dimensions of frame profile | Dimensions of accessories Available lengths for the slot diffuser Single design (-N) - Length L= 1000 mm (-01000-N) - Length L= 1500 mm (-01500-N) - Length in mm, can be freely selected (-xxxxx-N) (Length L <1000 mm to >400 mm can be fitted with plenum box) For detail W, see page 17. EOL = installation opening length DL = difference in length Left TS = left section Construction subject to change No return possible

Open the catalog to page 8

TECHNICAL DOCUMENTATION | Dimensions of accessories With fixed connection. With lateral spigot. Standard for the models DSC-R0, DSC-S0 and DSC-P0. The slot diffuser is permanently connected to the plenum box. The DSC is manufactured as standard the lengths L = 1000 mm or 1500 mm. View A / with 1 spigot With lateral spigot (-S1, standard) DSC-1-…-ASK-24-…-FV-S1 ap- View A / with 2 spigots For diffuser mounting, detail X, see page 13. For detail Y (rubber lip seal), see page 13. For fastening details, see page 21. For the band design, see page 19. EÖB = installation opening width EÖL =...

Open the catalog to page 9

TECHNICAL DOCUMENTATION | Dimensions of accessories With fixed connection. With spigot from above. Standard for the models DSC-R0 / DSC-S0 and DSC-P0. The slot diffuser is permanently connected to the plenum box. The DSC is manufactured as standard the lengths L = 1000 mm or 1500 mm. View A / with 1 spigot With spigot from above (-S0) View A / with 2 spigots For diffuser mounting, detail X, see page 13. For detail Y (rubber lip seal), see page 13. For fastening details, see page 21. For the band design, see page 19. EÖB = installation opening width EÖL = installation opening length...

Open the catalog to page 10

TECHNICAL DOCUMENTATION | Dimensions of accessories With concealed mounting. With lateral spigot. Possible for the models DSC-R0 / DSC-P0 and DSC-S0-Z1 / -Z2 (with additional profile). Not possible for the models DSC-S0Z0 / DSC-S0-Z3. The slot diffuser is screwed to the pole brace in the plenum box housing with concealed screws. The DSC is manufactured as standard the lengths L = 1000 mm or 1500 mm. View A / with 1 spigot With lateral spigot (-S1, standard) DSC-1-…-ASK-24-…-VM-S1 (standard) ap- View A / with 2 spigots For diffuser mounting, detail X, see page 13. For detail Y (rubber lip...

Open the catalog to page 11

TECHNICAL DOCUMENTATION | Dimensions of accessories With concealed mounting. With spigot from above. Possible for the models DSC-R0 / DSC-P0 and DSC-S0-Z1 / -Z2 (with additional profile). Not possible for the models DSC-S0Z0 / DSC-S0-Z3. The slot diffuser is screwed to the pole brace in the plenum box housing with concealed screws. The DSC is manufactured as standard the lengths L = 1000 mm or 1500 mm. View A / with 1 spigot With spigot from above (-S0) View A / with 2 spigots For diffuser mounting, detail X, see page 13. For detail Y (rubber lip seal), see page 13. For fastening details,...

Open the catalog to page 12