Catalogs >
SCHAKO KG >
DISA-H

DISA-H
1 / 34Pages

Catalog excerpts

11/15 - 2 Construction subject to change. Version: 14.12.2015 No return possible!

Induction diffuser DISA-H Description Induction diffusers combine the flow characteristics of air diffusers with the energetic advantages of load discharge via water-based heat exchangers, allowing them to remove high thermal loads from the room while keeping the hygienically required air exchange low. Its low installation depth and horizontal air flow makes it suitable in particular for installation in suspended entrance halls and in suspended ceiling panellings, such as in hotels, hospitals and offices. The primary air (1) supplied from the plenum box induces secondary air in the room...

Open the catalog to page 3

Model DISA-H DISA-H-H DISA-H-HT DISA-...-D DISA-...-E DISA-...-F DISA-...- 900 DISA-...-1200 DISA-...-1500 Induction diffuser DISA-H Description of the equipment Construction Housing and nozzle plate - Galvanised sheet steel, with 1 or 2 connection pipes 098, 0123 (standard) or 0148 mm. Painted housing RAL 9005 (optional) - Connection pipe position: - horizontal (-H) - Arrangement of connecting pieces - 1 central connecting piece (-AS1) - 2 central connecting pieces and at the same distance (-AS2/AS3) Heat exchanger - 2-pipe system (cooling or heating) or optionally 4-pipe system (cooling...

Open the catalog to page 4

ICHAK#Induction diffuser DISA-H Models and dimensions Dimensions and weights 1 Housing 2 Heat exchanger 3 Supply air inlet L (mm) = Length (900 ,1200 and 1500) 4 Water connection 0D (mm) = diameter of the connection pipes (98, 123 and 148) 1) Standard unit: housing + heat exchanger (empty) Construction subject to change.

Open the catalog to page 5

ICHAKOInduction diffuser DISA-H Arrangement of the connection pieces and water connection Number of connecting pieces with 1 connecting piece (-AS1) Number/position of the connection pipes - 1 connection pipe (standard) - centre back (-AS1) - 2 connection pipes - left and right back (-AS3/-AS2) Number/position of the water connections - with 2 water connections (2-pipe system, standard) - with 4 water connections (4-pipe system) - left back (-WS1) - right back (-WS2) Hydraulic connections DISA-H-H (2-pipe) with 2 connecting pieces (-AS2/AS3) Hydraulic connections DISA-H-HT (4-pipe)...

Open the catalog to page 6

The grilles are mounted with concealed mounting VM11. Accessories Rubber lip seal (-GD) At the connection piece for better tightness. Volumetric flow measuring tube (-MR) The supplied primary volumetric flow can be simply checked by checking the static pressure with a Pa meter. The measurement is taken in the supply air area. Flexible connection hoses (-FA) Flexible armoured hose with stainless steel braid, oxygen diffusion layer to DIN 4726, one-sided by means of plug-in fitting 90° with stainless steel prong, support ring, 2 sealing rings (operating pressure 20 bar, test pressure 60 bar,...

Open the catalog to page 7

Induction diffuser DISA-HTechnical data Performance data DISA-H-H -...-D -Cooling- L (mm)

Open the catalog to page 8

Induction diffuser DISA-HDISA-H-H -...-E -Cooling- L (mm)

Open the catalog to page 9

Induction diffuser DISA-HDISA-H-H -...-F -Cooling- L (mm) Construction subject to change.

Open the catalog to page 10

Induction diffuser DISA-HDISA-H-H -...-D -Heating- L (mm) Construction subject to change.

Open the catalog to page 11

Induction diffuser DISA-HDISA-H-H -...-E -Heating- L (mm) Construction subject to change.

Open the catalog to page 12

Induction diffuser DISA-HDISA-H-H -...-F -Heating- L (mm) Construction subject to change.

Open the catalog to page 13

Induction diffuser DISA-H Sound level Sound pressure level (room damping -8 dB)11/15 - 14 Version: 14.12.2015 L (mm) Construction subject to change.

Open the catalog to page 14

“HAk#Induction diffuser DISA-HFlow data DISA-H-D (with grille) Critical throw Maximum end velocity of jet (isotherm) with coanda effect Correction factors for the critical throw Length correction factors for air volumes Critical jet path - Correction factors for PA grille Maximum end velocity of jet - Correction factors for PA grille PA-1 Blade position straight PA-1 Blade position straight Critical jet path - Correction factors for IB grille Maximum end velocity of jet - Correction factors for IB grille IB-1 Blade position straight IB-1 Blade position straight Version: 14.12.2015...

Open the catalog to page 15

Induction diffuser DISA-H Maximum end velocity of jet (isothermal) at floor level Temperature ratio / induction ratio secondary slot - primary air only Correction factors for temperature ratios TV and Induction ratio Length correction factors for air volumes Maximum end velocity of jet - Correction factors for PA grille Induction ratios and temperature ratios -Correction factors for PA grille PA-1 Blade position straight Maximum end velocity of jet - Correction factors for IB grille PA-1 Blade position straight IB-1 Blade position straight Induction ratios and temperature ratios -Correction...

Open the catalog to page 16

“HAk#Induction diffuser DISA-HDISA-H-D (without grille) Critical throw Length correction factors for air volumes VZU x KF Correction factors for the critical throw Construction subject to change.

Open the catalog to page 17

Induction diffuser DISA-H Maximum end velocity of jet (isothermal) at floor level Temperature ratio / induction ratio secondary slot - primary air only Length correction factors for air volumes VZU x KF NL 11/15 - 18 Construction subject to change. Version: 14.12.2015 No return possible!

Open the catalog to page 18

“HAk#Induction diffuser DISA-HDISA-H-E (with grille) Critical throw Maximum end velocity of jet (isotherm) with coanda effect Correction factors for the critical throw Length correction factors for air volumes VZU x KF Critical jet path - Correction factors for PA grille Maximum end velocity of jet - Correction factors for PA grille IB-1 Blade position straight Construction subject to change.

Open the catalog to page 19

Maximum end velocity of jet (isothermal) at floor level Temperature ratio / induction ratio secondary slot - primary air only Correction factors for temperature ratios TV and Induction ratio Length correction factor for air volumes Maximum end velocity of jet - Correction factors for PA grille Induction ratios and temperature ratios -Correction factors for PA grille PA-1 Blade position straight PA-1 Blade position straight Maximum end velocity of jet - Correction factors for IB grille IB-1 Blade position straight Induction ratios and temperature ratios -Correction factors for IB grille IB-1...

Open the catalog to page 20