11/29 - 2 Construction subject to change. Version: 20.10.2015 No return possible!

Ceiling induction diffuser DISA-360 Description The ceiling induction diffuser DISA-360 is based on air/water technology and works by the energy-efficient induction principle. Its four-way throw of the cooled and heated air fulfills maximum performance and comfort requirements. The construction is very maintenance-friendly and is also suitable for low false ceiling heights, due to its small height. 4 different nozzle configurations B, C, D, E and two sizes 600 x 600 and 600 x 1200 allow the DISA-360 to be adjusted to almost any performance requirements and grid ceiling sizes. The primary air...

Ceiling induction diffuser DISA-360 Model DISA-360-H -DISA-360 -HT-DISA-360-BO -DISA-...-LE -DISA-...-LB -DISA-...-SR -DISA-...-SQ -DISA-...-RE -DISA-...-OB -DISA-...-PA -DISA-...-B -DISA-...-C -DISA-...-D -DISA-...-E - 2-pipe system (standard) 4-pipe system Without register With individually adjustable air deflection blades Blockwise adjustable air deflection blades Foldable perforated sheet, perforation 0 6 mm (standard) Foldable perforated sheet, perforation 8x8 mm Foldable perforated sheet, perforation 12x5 mm Foldable perforated sheet, oval perforation 18x6 mm Foldable louvre grid type PA...

Ceiling induction diffuser DISA-360 Models and dimensions Dimensions and weights C Arrangement of the connection pipes (-AS) and water connection (-WS) with perforated sheet grille (-SR/-SQ/-RE/OB) with louvre grid (-PA) ØD Number/position of the connection pipes - with horizontal connection (-H) - with 1 central connecting piece (-AS1) - with 2 connecting pieces (-AS2/AS3) - with vertical connection (-V) - with 1 central connecting piece (-AS4) - with 2 connecting pieces (-AS5/AS6) Number/position of the water connections - with 2 water connections (2-pipe system, standard) - with 4 water connections...

Ceiling induction diffuser DISA-360 Vertical connection (-V) with 1 connecting piece (-AS4) - Individually adjustable air deflection blades (-LE) - Blockwise adjustable air deflection blades (-LB) With blockwise adjustable blades, 5 blades can be adjusted simultaneously. A The adjusting angle of the air deflection blades must /'\ not be more than ± 45°, in order to guarantee its function. A At an adjusting angle of the air deflection blades outside the straight air throw of up to 45°, the cooling capacity of the heat exchanger is reduced by up to 5%, and the horizontal throw is reduced. Construction...

Ceiling induction diffuser DISA-360 Accessories Rubber lip seal (-GD) At the connecting piece for better tightness. Volumetric flow measuring tube (-MR) The supplied primary volumetric flow can be simply checked by checking the static pressure with a Pa meter. Flexible connection hoses (-FA) Flexible armoured hose with stainless steel braid, oxygen diffusion layer to DIN 4726, one-sided by means of plug-in fitting 90° with stainless steel claw, support ring, 2 sealing rings (operating pressure 20 bar, test pressure 60 bar, temperature -40° to +80°) and lock washer, other side 1/2" spigot nut...

Ceiling induction diffuser DISA-360 Technical data Performance data DISA-360-H -...-B -Cooling- Construction subject to change.

Ceiling induction diffuser DISA-360DISA-360-H -...-C -Cooling- NL (mm) Construction subject to change.

Ceiling induction diffuser DISA-360DISA-360-H -...-D -Cooling- NL (mm) Construction subject to change.

Ceiling induction diffuser DISA-360DISA-360-H -...-E -Cooling- NL (mm) Construction subject to change.

Ceiling induction diffuser DISA-360DISA-360-H -...-B -Heating- NL (mm) Construction subject to change.

Ceiling induction diffuser DISA-360DISA-360-H -...-C -Heating- NL (mm) Construction subject to change.

Ceiling induction diffuser DISA-360DISA-360-H -...-D -Heating- NL (mm) Construction subject to change.

Ceiling induction diffuser DISA-360DISA-360-H -...-E -Heating- NL (mm) Construction subject to change.

Ceiling induction diffuser DISA-360 Sound level Sound pressure level (room damping -8 dB)11/29 - 16 Version: 20.10.2015 Construction subject to change.

Ceiling induction diffuser DISA-360 Flow data DISA-360...-B-... Critical throw Length correction factor for air volumes V x KF Correction factors for the critical throw Construction subject to change.

Maximum end velocity of jet (isothermal) at floor level Temperature ratio / induction ratio secondary slot - primary air only vmittel ~ vmax x Length correction factor for air volumes Construction subject to change.

Maximum end velocity of jet (isothermal) with coanda effect Length correction factor for air volumes V x KF Correction factors for the critical throw Construction subject to change.

Ceiling induction diffuser DISA-360 Maximum end velocity of jet (isothermal) at floor level Temperature ratio / induction ratio secondary slot - primary air only vmittel = vmax x 0.8 Length correction factor for air volumes V x KF NL 600 1200 11/29 - 20 Construction subject to change. Version: 20.10.2015 No return possible!

Maximum end velocity of jet (isothermal) with coanda effect Length correction factor for air volumes V x KF Correction factors for the critical throw Construction subject to change.

Maximum end velocity of jet (isothermal) at floor level Temperature ratio / induction ratio secondary slot - primary air only Length correction factor for air volumes V x KF Construction subject to change.

Critical throw Length correction factor for air volumes V x KF Correction factors for the critical throw Construction subject to change.

Ceiling induction diffuser DISA-360 Maximum end velocity of jet (isothermal) at floor level Temperature ratio / induction ratio secondary slot - primary air only Length correction factor for air volumes V x KF Construction subject to change.

ICHAKOCeiling induction diffuser DISA-360Control units Valves 3-way valves (series VXP46.10-...) - Nominal diameter 10 mm - Connection G1/2 B - kvs: 0.63 (VXP46.10-0.63) and 1 m3/h (VXP46.10-1) - Aps : 150 kPa - Apmax:100 kPa - Drives SSA (100 N) and STA (100 N) 2-way valves (series VD115CLC) - Nominal diameter 15 mm - Connections inner and outer thread 1/2 inch - Manual setting button/protective cap included in delivery - Valve with adjustable kvs by means of a ring 0.25-1.9 mwh - Drives SSA (100 N) and STA (100 N) Compatible drives: Valve data: The presetting < 5 is not recommended because...