EU - ASSEMBLY AND INSTRUCTIONS MANUAL ASSEMBLY AND INSTRUCTIONS MANUAL SCAN 66

CONGRATULATIONS ON YOUR NEW SCAN WOOD-BURNING STOVE You have purchased a product by one of Europe’s leading manufacturers of wood-burning stoves, and we are sure that you will have years of pleasure from your purchase. To make the best possible use of your stove, it is important that you follow our advice and instructions. Read through this Assembly and Instruction Manual carefully before you start to assemble your stove. SCAN 66-2 PEDESTAL BASE SCAN 66-4 PLINTH BASE SCAN 66-5 S-CURVE BASE

Technical data and dimensions 4 Dimension sketch and minimum distances 6 5 Product registration number 8 ■ ASSEMBLY Tools needed for mounting of the stove 9 Existing chimney and pre-fabricated element chimney 10 Connection between stove and steel chimney 10 Closed combustion system 11 CB-technology (Clean Burn) 27 Fitting the flue connection piece 14 Height adjustment of stove 16 Mounting of wall-hung model 17 Mounting of the burn chamber on the pedestal base 21 Mounting of external air supply on the pedestal base 21 Mounting of the burn chamber on the plinth base 22 Mounting of external air...

TECHNICAL DATA INSTALLATION ¬ The house owner is responsible for ensuring that installation and assembly are in accordance with national and local building regulations as well as the information provided in this Assembly and Instruction Manual ¬ When you install any kind of fireplace or stove, you must inform the local building and housing authorities. In addition you are obliged to have the installation inspected and approved by a local chimney sweep prior to commissioning ¬ To ensure best-possible functionality and safety for your installation, we advise you to call a professional fitter. Your...

Steel plate Cast iron Galvanised sheet Vermiculite Surface treatment Connecting piece internal diameter 144 mm Connecting piece external diameter 148 mm Fresh air connection piece external diameter Approval type Intermittent fuelling* * Intermittent operation in this context means normal use of a wood-burning stove. In other words, you should let the fire die down until only the embers are left before refueling. This stove is produced in accordance with type approval for the product, which also covers the product's Assembly and Instruction Manual. The Declaration of Performance (DoP) is available...

All distances are in mm. All distances are minimum distances * Connection of fresh-air intake - external diameter Ø 100 mm ** Min. distance to furniture/flammable material *** Height to the beginning of flue connecting piece at top outlet Flammable material Målskitse Scan 66-1 væghængt Målskitse Scan 66-2 Pedistal Radiation zone 434* X / Y according to national laws and regulations Floor plate Målskitse Scan 66-4 Plint DIMENSION SKETCH AND MINIMUM DIS

NAVN: TG.NR: Målskitse - væghængt (afstand til brændbart) The wall model is only to be mounted on a non-combustible wall! w Afstand til brændbart - isoleret Minimum distance to flammable floor90066005B id B. 07 KEN N/A 06-01-2021 60 (wall model) 06 0 9 AREAL: \ 66 an 66\90066005B.idw STI: C:\Working cFolder\Designs\Scan \S s n ig es \D er ld o F g in rk DIMENSION: Minimum distance to flammable materials (insulated flue pipe) 150 DK-5492 Vissenbjerg© STI: C:\Working Folder\Designs\Scan 66\90066015B.idw DIMENSION: Krog Iversen & Co A/S 6 All distances are in mm. an Sc : All distances are minimum...

TYPE PLATE All Scan wood-burning stoves are fitted with a type plate that specifies the approval standards and the distance to flammable materials. The type plate is located at the rear of the stove. Typeplate Type plate Product registration number MATERIALE: AREAL: PRODUCT REGISTRATION NUMBER All Scan wood-burning stoves are provided with a product registration number. Please make a note of this number at the rear page of this manual; you will always need to quote it when contacting your dealer or Scan A/S. Product registration number The product registration number is located at the rear of...

ASSEMBLY TOOLS NEEDED FOR MOUNTING OF THE STOVE ¬ Spirit level CONTENTS OF PACKAGING ¬ 1 Scan 66 stove body ¬ 6 vermiculite plates ¬ 2 pins for baffle plates ¬ 1 connecting piece for fresh air inlet ¬ 1 log guard made of glass Krog Iversen & Co A/S DK-5492 Vissenbjerg© LOOSE PARTS In the stoves combustion chamber you will find the following loose parts: NAVN: ¬ 4 pcs. screws for connecting piece/fresh air MATERIALE: DIMENSION: ¬ Repair lacquer for coloured stoves inkl. skamol ¬ Small shaped floor plate in glassVÆGT: or steel N/A (steel only for Scan 66-2 & 66-5) DIM.: Skamol enkeltdele HMS N/A...

Your Scan stove may come supplied with the following packaging: If you intend to connect your stove to an existing chimney, it makes sense to contact an authorised Scan dealer, or a local chimney sweep, for advice. These experts will also let you know if your chimney needs renovating. - When connecting a prefabricated element chimney, follow the manufacturer's connection instructions for the relevant chimney type Your Scan dealer, or local chimney sweep, can advise you on choosing a make and type of steel chimney. This ensures that the chimney will match your wood-burning stove. The chimney must...

CLOSED COMBUSTION SYSTEM You should use the closed combustion system for the wood-burning stove if you live in a newly-built, airtight home. External combustion air is connected through a ventilation pipe via the wall or floor. We recommend mounting a valve in the ventilation pipe in order to avoid condensate in the stove and the pipe system, when the stove is not in use. It can also be an advantage to insulate the ventilation pipe. Minimum Ø 100 mm ventilation pipe, maximum length: 6 metres with a maximum of one bend. We recommend smooth steel pipes. Connecting piece for fresh air inlet is loose...