EU - ASSEMBLY AND INSTRUCTIONS MANUAL ASSEMBLY AND INSTRUCTIONS MANUAL SCAN 65

CONGRATULATIONS ON YOUR NEW SCAN WOOD-BURNING STOVE You have purchased a product by one of Europe’s leading manufacturers of wood-burning stoves, and we are sure that you will have years of pleasure from your purchase. To make the best possible use of your stove, it is important that you follow our advice and instructions. Read through this Assembly and Instruction Manual carefully before you start to assemble your stove.

PLEASE NOTE! YOU GET THE BEST USE OF THE STOVE BY USING A TOP-DOWN LIGHTING METHOD SEE "INSTRUCTIONS FOR HEATING"

Technical data and dimensions 6 Dimension sketch and minimum distances 8 7 Product registration number 11 Tools needed for mounting of the stove 12 Closed combustion system 13 Existing chimney and pre-fabricated element chimney 13 Connection between stove and steel chimney 13 CB-technology (Clean Burn) 22 Height adjustment of stove 16 Fitting the flue connection piece 16 Handle for riddling grate 22 Warning about over-firing 25 Using your stove in various weather conditions 25 Firing in the spring or autumn 25 Selecting wood/fuel 27 Use of the following as fuel is illegal 27 27 Calorific value...

TECHNICAL DATA INSTALLATION ¬ The house owner is responsible for ensuring that installation and assembly are in accordance with national and local building regulations as well as the information provided in this Assembly and Instruction Manual ¬ When you install any kind of fireplace or stove, you must inform the local building and housing authorities. In addition you are obliged to have the installation inspected and approved by a local chimney sweep prior to commissioning ¬ To ensure best-possible functionality and safety for your installation, we advise you to call a professional fitter. Your...

-Test in compliance with EN 13240

EMNE: Opstilling Opstillingstegning (afstand til brændbart materiale) C:\Working Folder\Designs\Scan 65\90065041.idw STI: ovn mod brændbar væg, med sideruder TG.NR: 90064003 EMNE: Opstilling mod brændbar væg, ovn uden sideruder All distances are in mm. All distances are minimum distances NAVN: Scan 64 * Half-insulated chimney / shielded flue pipe mod brændbar væg, sideruder TG.NR: 90064043 EMNE: Opstilling MATERIALE: (The requirements to the chimney and the flueovn pipeuden in terms of safety distances must be met) Flammable material Minimum distance MATERIALE: to flammable materials (with side...

TG.NR: SIGN: Flammable material AREAL: 72301695 mm^2 DIMENSION: Krog Iversen & Co A/S Opstillingstegning (afstand til brandmur) Folder\Designs\Scan STI: C:\Working DK-5492 Vissenbjerg© All distances are in mm. DATO: 30-08-2022 SIGN: KEN VÆGT: 903,37 kg MATERIALE: DATO: 30-08-2022 SIGN: KEN VÆGT: 903,37 kg All distances are minimum distances AREAL: 72301695 mm^2 DIMENSION: Krog Iversen & Co A/S AREAL: flue 72301695 mm^2 * Half-insulated chimney / shielded pipe (The requirements to the&chimney Krog Iversen Co A/S and the flue pipe in terms of safety distances must be met) Opstillingstegning (afstand...

TYPE PLATE All Scan wood-burning stoves are fitted with a type plate that specifies the approval standards and the distance to flammable materials. The type plate is located at the rear of the stove. Type plate 65-1, 65-3, 65-7 and 65-9 (with side windows) Type plate 65-2, 65-4, 65-8 and 65-10 (without side windows) PRODUCT REGISTRATION NUMBER All Scan wood-burning stoves are provided with a product registration number. Please make a note of this number at the rear page of this manual; you will always need to quote it when contacting your dealer or Scan A/S. The product registration number is...

■ Spirit level ■ Open-end spanner The loose parts are located in the stove's ash drawer. ■ Glove ■ Scan 65-3 and Scan 65-4: 4,5 m gasket ■ 4 pcs. screws M5x10 mm for fastening the connecting piece ■ Scan 65-7 and Scan 65-8: 7 m gasket ■ Seal for the connecting piece ■ 1 pcs. screw M5x6mm (For UK in Smoke Restricted Areas) ■ Large shaped floor plate in glass or steel ■ Soapstones top plate for stove with top outlet ■ Adjustment key for height adjustment ■ Small shaped floor plate in glass or steel ■ Soapstones top plate for stove with rear outlet ■ Scan 65-7/8/9/10: Heat accumulating stones Your...

CLOSED COMBUSTION SYSTEM You should use the closed combustion system for the wood-burning stove if you live in a newly-built, airtight home. External combustion air is connected through a ventilation pipe via the wall or floor. We recommend mounting a valve in the ventilation pipe in order to avoid condensate in the stove and the pipe system, when the stove is not in use. It can also be an advantage to insulate the ventilation pipe. It must be possible to shut off the ventilation pipe with a valve, when the stove is not in use. Minimum Ø 100 mm ventilation pipe, maximum length: 6 metres with...

DISTANCE TO FURNITURE Distance to furniture from glass: 1000 mm. You should however assess whether furniture or other items might become excessively dry due to being too close to the stove. SAFETY DISTANCE European, national and local regulations concerning safety distances for wood-burning stoves must be complied with. There are no demands concerning the distance to non-flammable materials, but we recommend a distance of 50 mm in order to facilitate the cleaning of the stove, the flue pipes and the chimney and to prevent possible damages to the wall.

REMOVAL OF PACKAGING Check that the stove is not damaged before starting to install it. 1 Remove the screws securing the stove to the pallet Remove the protection between the baffle plates, before taking the stove into use! Put back the upper plate on the pins, as the protection pushes the plate upwards NOTE: When the stove is new, the door may stand out a little from the stove, DATO: 21-08-12 SIGN: BC VÆGT: N/A and the handle may feel tight, as the stove has to be fired a couple of times, beforeEMNE: the gasket “settles”. This is quite normal. AREAL: N/A på Krog Iversen & Co A/S Brændeovn palle...