UK - ASSEMBLY AND INSTRUCTIONS MANUAL ASSEMBLY AND INSTRUCTION MANUAL SCAN 5005 FRL

CONGRATULATIONS ON YOUR NEW SCAN BUILT-IN STOVE You have purchased a product by one of Europe’s leading manufacturers of wood-burning stoves, and we are sure that you will have years of pleasure from your purchase. To make the best possible use of your stove, it is important that you follow our advice and instructions. Read through this Assembly and Instruction Manual carefully before you start to assemble your stove.

Technical data and dimensions 5 Additional accessories Disposal of packaging Load-bearing foundation Floor plate Existing chimney and pre-fabricated element chimney Connection between built-in stove and steel chimney Requirements for chimney Trim Internal installation in non-flammable material Minimum distance to flammable materials Building in the stove at a fire wall Safety distance Using the handling set Baffle plates Environmentally friendly operation Lighting Continuous operation Warning about over-firing Using the stove in various weather conditions 10 Before building the insert 10 Closed...

TECHNICAL DATA INSTALLATION ¬ The house owner is responsible for ensuring that installation and assembly are in accordance with national and local building regulations as well as the information provided in this Assembly and Instructions Manual ¬ When you install any kind of fireplace or stove, you must inform the local building and housing authorities. In addition you are obliged to have the installation inspected and approved by a local chimney sweep prior to commissioning ¬ To ensure best-possible functionality and safety for your installation, we advise you to call a professional fitter....

Surface treatment Weight Scan 5005 FRL w/ frame Flue conn. piece internal diameter Flue conn. piece external diameter Approval type Steel plate Cast iron Galvanised sheet Chamotte Test in compliance with EN 13229 Intermittent operation in this context means normal use of a built-in stove. In other words, you should let the fire die down until only the embers are left before refuelling. This built-in stove is produced in accordance with type approval for the product, which also covers the product's Assembly and Instruction Manual. The Declaration of Performance (DoP) is available from www.scan-stoves.com...

DATO: SIGN: ken DK-5492 Vissenbjerg© 24-08-2021 Scan A/S All distances are in mm. DK-5492 Vissenbjerg© STI: C:\Working Folder\Designs\Scan 5005\95005001.idw All distances are minimum distances * For heavy wall constructions or wide non combustible fireplaces, that are thicker than 50 mm ** Connection of fresh-air intake - inside measure: Ø132 mm - outside measure: Ø149 mm *** Height to the beginning of flue connecting piece at top/rear outlet, flue conn. piece - inside measure: Ø175 mm - outside measure: Ø200 mm Flammable material Målskitse med ramme AREAL: N/A Scan 5005 MATERIALE: STI: C:\Working...

All distances are in mm. All distances are minimum distances * Distance to glass ** Min. distance to furniture/flammable material Radiation zone Fire wall, e.g. 50 mm Jøtul Firewall, 110 mm brick or other material with corresponding fireproof and insulating abilities Flammable material Gulvplade (afstand til brændbart) X / Y according to national laws and regulations Brandmur F.eks. 50 mm Jøtul firewall, 110 mm mursten eller andet materiale med tilsvarende brandfasthed og isolationsevne. Brandbart materiale Building in the Scan 5005 against a flammable wall protected by a fire wall Floor plate...

Fire wall, e.g. 50 mm Jøtul Firewall, 110 mm brick or other material with corresponding fireproof and insulating abilities Flammable material All distances are in mm. All distances are minimum distances * Distance to flammable floor Lower convection opening Insulated length Upper convection opening Cavities are not to be filled out with insulation material! Installation with an insulated, vertical flue pipe - structure/surround to ceiling Installation with an insulated, vertical flue pipe - open structure/surround Building in the Scan 5005 against a flammable wall protected by a fire wall MINIMUM...

TYPE PLATE All Scan built-in stoves are fitted with a type plate that specifies the approval standards and the distance to flammable materials. The type plate is placed loose in the fireplace. Type plate Scan 5005 FRL PRODUCT REGISTRATIONUMBER All Scan built-in stoves are provided with a product registration number. Please make a note of this number at the rear page of this manual; you will always need to quote it when contacting your dealer or Scan A/S. Product registration number Scan 5005 FRL

■ White rear chamotte stone ■ Black painted handle ■ Ash container with grate (see page 23) ■ Heat shield/convection cover (see page 15) ■ Convection air grid (see page 21) ■ White rear chamotte stone ■ Detachable handle (see page 22) Your Scan built-in stove may come supplied with the following packaging: All items in our product range come under the category of lightweight fireplaces and stoves and do not normally require any reinforcement of the beam structure. They can be positioned on ordinary beams/floor. You should of course make sure that the foundation on which the stove is positioned...

REQUIREMENTS FOR CHIMNEY The chimney must have a minimum internal diameter of 190 mm and have a T400 designation, with G for the soot fire test. The length should be min. 5 metres. If you opt to connect the built-in stove with an elbow pipe, you should use a curved elbow, as this gives a better draught. If you connect the stove with a sharp elbow pipe, the cleansing lid must be placed in the vertical part so that the horizontal part can be cleaned through here. If the chimney is fitted with a smoke extractor, it must be possible to adjust it to a suitable draft. The requirements to the chimney...

USING THE HANDLING SET (ACCESSORY) You can buy a handling kit as an accessory. Install the four tubes through the holes in order to lift the built-in stove. BEFORE BUILDING THE INSERT IMPORTANT! Before the insert is built in, the bolts in each the side of the insert should be removed. Løftestangssæt, Scan 5005 FRL VÆGT: N/A TG.NR: DATO: