UK - ASSEMBLY AND INSTRUCTIONS MANUAL ASSEMBLY AND INSTRUCTION MANUAL SCAN 5003-S FR/FL

CONGRATULATIONS ON YOUR NEW SCAN BUILT-IN STOVE You have purchased a product by one of Europe’s leading manufacturers of wood-burning stoves, and we are sure that you will have years of pleasure from your purchase. To make the best possible use of your stove, it is important that you follow our advice and instructions. Read through this Assembly and Instruction Manual carefully before you start to assemble your stove.

Technical data and dimensions 4 Dimension sketch and minimum distances 6 5 Product registration number 8 Tools for the mounting of the built-in stove 9 Existing chimney and pre-fabricated element chimney 12 Connection between built-in stove and steel chimney 12 Minimum distance to flammable materials 12 Building in the stove at a fire wall 12 Closed combustion system 13 Clips for Norway (Large rooms) 14 Mounting of the heat shields/convection covers 15 Before mounting of surrounding 19 Baffle plates 27 Combustion air 27 Environmentally friendly operation Lighting Using the stove in various weather...

TECHNICAL DATA INSTALLATION ¬ The house owner is responsible for ensuring that installation and assembly are in accordance with national and local building regulations as well as the information provided in this Assembly and Instructions Manual ¬ When you install any kind of fireplace or stove, you must inform the local building and housing authorities. In addition you are obliged to have the installation inspected and approved by a local chimney sweep prior to commissioning ¬ To ensure best-possible functionality and safety for your installation, we advise you to call a professional fitter....

Silicate plate Steel plate Materials Cast iron Galvanised sheet Chamotte Surface treatment Senotherm Weight Scan 5003-S FR/FL 199 kg Flue conn. piece internal diameter 132 mm Flue conn. piece external diameter 149 mm Test in compliance with EN 13240 Intermittent operation in this context means normal use of a built-in stove. In other words, you should let the fire die down until only the embers are left before refuelling. This built-in stove is produced in accordance with type approval for the product, which also covers the product's Assembly and Instruction Manual. The Declaration of Performance...

X / Y according to national laws and regulations LF/RF S-3005 nacS ,estikslåM Drawing number: Målskitse, Scan 5003-S FR/FL All distances are in mm. All distances are minimum distances * Connection of fresh-air intake - inside measure: Ø 103 mm - outside measure: 120 mm ** Min. distance to furniture/flammable material *** Height to the beginning of flue connecting piece at top/rear outlet, flue conn. piece - inside measure: Ø132 mm - outside measure: Ø149 mm Flammable material DIMENSION SKETCH AND MINIMUM DIST

Fire wall, e.g. 50 mm Jøtul Firewall, 110 mm brick or other material with corresponding fireproof and insulating abilities C:\Working Folder\Designs\Scan Flammable material5003\95003064.idw All distances are in mm. All distances are minimum distances These distances apply for an insulated flue pipe all the way down to the stove * Distance to glass ** Distance to flammable ceiling WARNING! Keep the convection air intakes free from blokage Insulated length Building in the Scan 5003-S against a flammable wall protected by a fire wall MINIMUM DISTAN

TYPE PLATE All Scan built-in stoves are fitted with a type plate that specifies the approval standards and the distance to flammable materials. The eco energy label and type plate are placed in the box with steel parts and must replace the existing labels, which are located in the built-in oven. Type plate Scan 5003-S FR/FL PRODUCT REGISTRATION NUMBER All Scan built-in stoves are provided with a product registration number. Please make a note of this number at the rear page of this manual; you will always need to quote it when contacting your dealer or Scan A/S. Product registration number Scan...

TOOLS FOR THE MOUNTING OF THE BUILT-IN STOVE ■ Cordless electric drill ■ Tape measure/foot rule LOOSE PARTS The following loose parts are located in the built-in stove's ■ Gasket for flue connecting piece ■ Product registration number ■ Brackets for baffles plates Extra parts for Scan 5003-S: ■ Calcium Silicate Surround ■ 10 Lamello P-14 pre-load clips combustion chamber: ■ Flue connection piece ■ Screws for fastening the flue connection piece ■ Combustion chamber lining ■ Heat shield/convection cover ■ 1 Tenso P-14 pre-load tool ADDITIONAL ACCESSORIES ■ Fresh air box (see page 13) ■ Heat-storage...

FLOOR PLATE If you are placing the stove on a flammable floor, you must comply with the national and local regulations on the size of any non-flammable subsurface required to cover the floor around the stove. Your local Scan dealer can advise you on regulations concerning protection of flammable materials in the vicinity of your stove. The floor plate’s function is to protect the floor and flammable material against any sparks that may occur. 1142 1492 Large shaped floor plate in clear or smoke-coloured glass Small floor plate in clear or smoke-coloured glass Name: Gulvplader Scan 5003-S FR/FL...

Minimum frihøjde over gulvplader: Convection means that there is an air circulation ensuring that the heat is equally distributed in the room. It is important that the demands concerning convection areas are observed. ¬ Min. area for ingoing convection air: 500 cm2 ¬ Min. area for outgoing convection air: 760 cm2 If there is not enough convection air, the covering may be damaged. Do not obstruct the convection holes. Scan 5004-S FRL Scan 5003-S FL Articlenumber: Constructed/Changed by: Path: Drawing number: Drawing number:

EXISTING CHIMNEY AND PRE-FABRICATED ELEMENT CHIMNEY If you intend to connect your stove to an existing chimney, it makes sense to contact an authorised Scan dealer, or a local chimney sweep, for advice. These experts will also let you know if your chimney needs renovating. ¬ When connecting a pre-fabricated element chimney, follow the manufacturer’s connection instructions for the relevant chimney type. CONNECTION BETWEEN BUILT-IN STOVE AND STEEL CHIMNEY Your Scan dealer, or local chimney sweep, can advise you on choosing a make and type of steel chimney. This ensures that the chimney will match...